Abstract
Several deteriorating mechanisms such as moisture, biological degradation, delamination, and photochemical degradation can significantly affect the design life of timber structures. Undetected damage sharply augments the associated maintenance costs and, in extreme cases, results in the complete failure of timber structures. With a focus on sustainability in the construction industry, the demand for timber as a construction material has grown exponentially in the last decade. Hence, it has become imperative to not only characterize the behavior of timber structures under different circumstances but also to timely detect any progressive damage within the structures. This paper is focused on evaluating the existing state of art on wave propagation-based acoustic emission and ultrasonic methods for damage evaluation of timber structures. This paper reviews the test results of small timber specimens monitored within the laboratory environment as well as large structures that underwent real-time monitoring. The paper entails the details of the existing gaps in the area of use of wave propagation techniques for monitoring timber structures and also proposes possible solutions to cover those gaps.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Arriaga F, Íñiguez G, Esteban M, Fernández-Golfín JI (2006) Structural Tali timber (Erythrophleum ivorense A. Chev., Erythrophleum suaveolens Brenan.): assessment of strength and stiffness properties using visual and ultrasonic methods. Holz Als Roh Werkst 64:357–362
Beall F C (2002) Overview of the use of ultrasonic technologies in research on wood properties. Wood Science and Technology, 36(3): 197–212. https://doi.org/10.1007/s00226-002-0138-4
Beattie A G (1983) Acoustic emission, principles and instrumentation (SAND-82-2825). Sandia National Labs, Albuquerque, NM (USA). https://www.osti.gov/biblio/6309755
Behnia A, Chai HK, Shiotani T (2014) Advanced structural health monitoring of concrete structures with the aid of acoustic emission. Constr Build Mater 65:282–302
Benedetti A (1998) On the ultrasonic pulse propagation into fire damaged concrete. Struct J 95B: 259–271
Brozovsky J, Zach J (2008) An Assessment of the Condition of Timber Structures
Bucur V (2006) Acoustics of Wood (2nd edition). Journal of The Acoustical Society of America, 119. https://doi.org/10.1121/1.2197787
Chai HK, Aggelis DG, Momoki S, Kobayashi Y, Shiotani T (2010) Single-side access tomography for evaluating interior defect of concrete. Constr Build Mater 24:2411–2418. https://doi.org/10.1016/j.conbuildmat.2010.03.003
Cioni P, Croce P, Salvatore W (2001) Assessing fire damage to R.C. elements. Fire Saf J 36:181–199. https://doi.org/10.1016/S0379-7112(00)00050-3
Dackermann U, Crews K, Kasal B, Li J, Riggio M, Rinn F, Tannert T (2014) In situ assessment of structural timber using stress-wave measurements. Materials and Structures, 47(5): 787–803. https://doi.org/10.1617/s11527-013-0095-4
Darmono Ma’arif F, Widodo S, Nugroho M S (2019) Determination of Modulus of Dynamic Elasticity of Wood Using Ultrasonic Pulse Velocity Testing. IOP Conference Series: Earth and Environmental Science, 366(1): 012015. https://doi.org/10.1088/1755-1315/366/1/012015
de Oliveira FGR, Candian M, Lucchette FF, Luis Salgon J, Sales A (2005) A technical note on the relationship between ultrasonic velocity and moisture content of Brazilian hardwood (Goupia glabra). Build Environ 40:297–300
Emerson P, Kainz F, McLean R (1998) Nondestructive Evaluation Techniques for Timber Bridges
Emerson P, McLean F, Pellerin R (2002) Ultrasonic inspection of large bridge timbers. 52:8
El Najjar J, Mustapha, S (2020) Understanding the guided waves propagation behavior in timber utility poles. Journal of Civil Structural Health Monitoring, 10(5): 793–813. https://doi.org/10.1007/s13349-020-00417-0
Fang Y, Lin L, Feng H, Lu Z, Emms GW (2017) Review of the use of air-coupled ultrasonic technologies for nondestructive testing of wood and wood products. Comput Electron Agric 137:79–87
Fathi H, Nasir V, Kazemirad S (2020) Prediction of the mechanical properties of wood using guided wave propagation and machine learning. Construction and Building Materials, 262: 120848. https://doi.org/10.1016/j.conbuildmat.2020.120848
Farhidzadeh A, Salamone S, Singla P (2013) A probabilistic approach for damage identification and crack mode classification in reinforced concrete structures. J Intell Mater Syst Struct
Ghaib M, Shateri M, Thomson D, Svecova D (2018) Study of FRP bars under tension using acoustic emission detection technique. J Civ Struct Health Monit 8
Grosse C U, Ohtsu M, Aggelis D G, Shiotani T (2021) Acoustic Emission Testing: Basics for Research–Applications in Engineering. Springer Nature. Google-Books-ID: EYk4EAAAQBAJ
Holford K M, Carter D C (1999) Acoustic Emission Source Location. Key Engineering Materials, 167–168:162–171. https://doi.org/10.4028/www.scientific.net/KEM.167-168.162
Karaiskos G, Deraemaeker A, Aggelis DG, Hemelrijck DV (2015) Monitoring of concrete structures using the ultrasonic pulse velocity method. Smart Mater Struct 24:113001
Kasal B, Lear G, Tannert T (2011) Stress waves. In: Kasal B, Tannert T (eds) Situ assessment structural timber state art report RILEM technical communication. 215-AST, Springer Netherlands, Dordrecht, pp 5–24
Kawamoto S, Williams R S (2002) Acoustic emission and acousto-ultrasonic techniques for wood and wood-based composites: A review. Gen. Tech. Rep. FPL-GTR-134. Madison, WI: U.S. Department of Agriculture, Forest Service, Forest Products Laboratory. 16:134. https://doi.org/10.2737/FPL-GTR-134
Kazemi-Najafi S, Shalbafan A, Ebrahimi G (2009) Internal decay assessment in standing beech trees using ultrasonic velocity measurement. Eur J For Res 128:345–350
Krause M, Dackermann U, Li J (2015) Elastic wave modes for the assessment of structural timber: ultrasonic echo for building elements and guided waves for pole and pile structures. J Civ Struct Health Monit 5:221–249
Kot P, Muradov M, Gkantou M, Kamaris GS, Hashim K, Yeboah D (2021) Recent advancements in non-destructive testing techniques for structural health monitoring. Appl Sci 11:2750
Lee A, Wang G, Ternowchek S, Botten S F (2014) Structural Health Monitoring on Ships Using Acoustic Emission Testing
Lynnworth L (1989) Ultrasonic measurements for process control. https://www.semanticscholar.org/paper/Ultrasonic-measurements-for-process-control-Lynnworth/0c11ff7d0475fdf986a7ed3ce12a6094f432da34
Martínez-Jequier J, Gallego A, Suárez E, Juanes FJ, Valea Á (2015) Real-time damage mechanisms assessment in CFRP samples via acoustic emission Lamb wave modal analysis. Compos Part B Eng 68:317–326
Morales Conde MJ, Rodríguez Liñán C, Rubio de Hita P (2014) Use of ultrasound as a nondestructive evaluation technique for sustainable interventions on wooden structures. Build Environ 82:247–257
Nasir V, Fathi H, Kazemirad S (2021) Combined machine learning–wave propagation approach for monitoring timber mechanical properties under UV aging. Struct Health Monit 20:2035–2053
Ndagi A, Umar A A, Hejazi F, Jaafar M S (2019) Non-destructive assessment of concrete deterioration by ultrasonic pulse velocity: A review. IOP Conference Series: Earth and Environmental Science, 357(1):012015. https://doi.org/10.1088/1755-1315/357/1/012015
Nobile L, Nobile S (2015) Some Recent Advances of Ultrasonic Diagnostic Methods Applied to Materials and Structures (Including Biological Ones). Physics Procedia, 70: 681–685. https://doi.org/10.1016/j.phpro.2015.08.080
Papandrea SF, Proto AR, Cataldo MF, Zimbalatti G (2020) Comparative evaluation of inspection techniques for decay detection in urban trees. Environ Sci Proc 3:14
Peterson M L (1998) Evaluation of Wood Products Based on Elastic Waves. In R. E. Green (Ed.), Nondestructive Characterization of Materials VIII (pp. 561–566). Springer US. https://doi.org/10.1007/978-1-4615-4847-8_88
Raghavan A (2007) Guided-wave structural health monitoring [Thesis]. http://deepblue.lib.umich.edu/handle/2027.42/77498 . Accepted: 2010-07-12T15:23:00Z
Rescalvo FJ, Valverde-Palacios I, Suarez E, Roldán A, Gallego A (2018) Monitoring of carbon fiber- reinforced old timber beams via strain and multiresonant acoustic emission sensors. Sensors 18:1224
Rivera-Gómez C, Galán-Marín C (2013) In situ assessment of structural timber elements of a historic building by Moisture content analyses and ultrasonic velocity tests. International Journal for Housing Science and Its Applications, 37: 33–42
Riggio M, Sandak A, Sandak J (2012) In-situ assessment of structural timber using selected wave-based NDT methods. J Herit Conserv
Rodríguez Liñán C, Morales Conde MJ, Rubio de Hita P, Pérez Gálvez F (2011) Inspección mediante técnicas no destructivas de un edificio histórico: oratorio San Felipe Neri (Cádiz). Inf Constr 63:13–22
Rose J L (2000) Guided wave nuances for ultrasonic nondestructive evaluation. IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control, 47(3): 575–583. https://ieeexplore.ieee.org/document/842044. Accepted: 2014-12-01T07:09:39Z
Rose J L (2004) Ultrasonic Guided Waves in Structural Health Monitoring. Key Engineering Materials, 270–273: 14–21. https://doi.org/10.4028/www.scientific.net/KEM.270-273.14
Ross R J, Pellerin R F (1994) Nondestructive evaluation of wood: Proceedings of the 3rd Materials Engineering Conference. Infrastructute, 1233–1241
Rudnicki M, Wang X, Ross RJ, Allison RB, Perzynski K (2017) Measuring wood quality in standing trees—a review, U.S. Department of Agriculture, Forest Service, Forest Products Laboratory, Madison, WI
Sachse W, Yamaguchi K, Roget J (1991) Acoustic emission: current practice and future directions. ASTM International
Santoni A, Schoenwald S, Van Damme B, Fausti P (2017) Determination of the elastic and stiffness characteristics of cross-laminated timber plates from flexural wave velocity measurements. J Sound Vib 400:387–401
Scruby C B (1987) An introduction to acoustic emission. Journal of Physics E: Scientific Instruments, 20(8): 946. https://doi.org/10.1088/0022-3735/20/8/001
Shaji T, Somayaji S, Mathews MS (2000) Ultrasonic pulse velocity technique for inspection and evaluation of timber. J Mater Civ Eng 12:180–185
Smith I, Frangi A (2008) Overview of Design Issues for Tall Timber Buildings. Structural Engineering International, 18(2): 141–147. https://doi.org/10.2749/101686608784218833
Subhani M, Li J, Samali B (2013) A comparative study of guided wave propagation in timber poles with isotropic and transversely isotropic material models. J Civ Struct Health Monit 3:65–79
Subhani M M (2014) A study on the behaviour of guided wave propagation in utility timber poles [Thesis]. https://opus.lib.uts.edu.au/handle/10453/30350
Tanasoiu V, Miclea C, Tanasoiu C (2002) Nondestructive testing techniques and piezoelectric ultrasonics transducers for wood and built in wooden structures. Journal of Optoelectronics and Advanced Materials, 4
Tonolini F, Sala A, Villa G (1987) General review of developments in acoustic emission methods. Int J Press Vessels Pip 28:179–201
Ultrasonic Testing of Concrete |FPrimeC. (2023, July 18). FPrimeC Solutions Inc. https://www.fprimec.com/ultrasonic-testing-of-concrete
Wessels C, Malan F, Rypstra T (2011) A review of measurement methods used on standing trees for the prediction of some mechanical properties of timber. Eur J For Res 130
Wilcox W (1988) Detection of early stages of wood decay with ultrasonic pulse velocity. Forest Products Journal. https://www.semanticscholar.org/paper/Detection-of-early-stages-of-wood-decay-with-pulse-Wilcox/00e63e1c9c7fd738c578db4efc899eb1a95dc1bd
Wu J, Ng CT, Fang H (2022) Internal damages detection for structural timber members using low- frequency anti-symmetric guided wave. Constr Build Mater 322:126355
Yapar O, Basu PK, Volgyesi P, Ledeczi A (2015) Structural health monitoring of bridges with piezoelectric AE sensors. Eng Fail Anal 56:150–169
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 Canadian Society for Civil Engineering
About this paper
Cite this paper
Ajabshir, S., Gupta, R., Lum, C., Mazloomi, MS. (2023). Wave Propagation Techniques for the Condition Assessment of Timber Structures: A Review . In: Gupta, R., et al. Proceedings of the Canadian Society of Civil Engineering Annual Conference 2022. CSCE 2022. Lecture Notes in Civil Engineering, vol 348. Springer, Cham. https://doi.org/10.1007/978-3-031-34159-5_20
Download citation
DOI: https://doi.org/10.1007/978-3-031-34159-5_20
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-34158-8
Online ISBN: 978-3-031-34159-5
eBook Packages: EngineeringEngineering (R0)