Abstract
Mycelium composites are an attractive alternative to turn to more sustainable construction materials. Mycelium, the vegetative growth of fungi, is formed by a network of hyphae (elongated fungal cells). This mycelium network has the capacity to partly degrade carbon-rich fibres while binding them together. In this way, a biological process can serve to create biobased composite materials, in which the fungal biomass functions as inherent adhesive while the fibres provide the structural support. Finished mycelium composites can be heat-pressed into sheet materials. In this research, mycelium composites are heat-pressed to explore their potential as board material. We studied the influence of the substrate, heat-press process and increased thickness on the flexural strength of the materials. The used mycelium composites consisted of straw fibres, or a combination of rapeseed straw (RS) and cellulose, bound together with the fungus Ganoderma resinaceum. Through systematic study of the process parameters pressure, time and temperature, an optimized heat-press process was determined by flexural strength performance. As opposed to literature this project found flexural strengths within the range of glue-bound board materials such as particleboard and MDF. Mycelium composites made 100% of RS reached a flexural strength of 19 MPa, while mixed cellulose and RS showed a flexural strength of 12 MPa. Thicker materials were also produced and showed a flexural strength similar to thinner boards. This study showed that substrate composition, and heat-press process can influence material properties of mycelium boards.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Pelletier, M.G., Holt, G.A., Wanjura, J.D., Bayer, E., McIntyre, G.: An evaluation study of mycelium based acoustic absorbers grown on agricultural by-product substrates. Industr. Crops Prod. (2013). https://doi.org/10.1016/j.indcrop.2013.09.008
Jones, M., Tien, H., Sabu J.: Inherent species characteristic influence and growth performance assessment for mycelium composite applications. Adv. Mater. Lett. (2018). https://doi.org/10.5185/amlett.2018.1977
Appels, F.V.W., et al.: Fabrication factors influencing mechanical, moisture- and water-related properties of mycelium-based composites. Mater. Des. 161, 64–71 (2019)
Jones, M.P., et al.: Agricultural by-product suitability for the production of chitinous composites and nanofibers utilising trametes versicolor and polyporus brumalis mycelial growth. Process Biochem. (2019). https://doi.org/10.1016/j.procbio.2019.01.018
Liu, R., et al.: Preparation of a kind of novel sustainable mycelium/cotton stalk composites and effects of pressing temperature on the properties. Ind. Crops Prod. 141, 111732 (2019)
Chan, X.Y., Saeidi, N., Javadian, A., Hebel, D.E., Gupta, M.: Mechanical properties of dense mycelium-bound composites under accelerated tropical weathering conditions. Sci Rep 11, 22112 (2021)
Elsacker, E., Vandelook, S., Damsin, B., Van Wylick, A., Peeters, E., De Laet, L.: Mechanical characteristics of bacterial cellulose-reinforced mycelium composite materials. Fungal Biol. Biotechnol. 8, 18 (2021)
Khoo, S.H., et al.: Development of formaldehyde-free bio-board produced from mushroom mycelium and substrate waste. J. Hazard. Mater. 400, 123296 (2020)
Elsacker, E., De Laet, L., Peeters, E.: Functional grading of mycelium materials with inorganic particles: the effect of nanoclay on the biological chemical and mechanical properties. Biomimetics 7(2), 57 (2022)
Lelivelt, R.J.J., Lindner, G., Teuffel, P., Lamers, H.: The production process and compressive strength of Mycelium-based materials. In: First International Conference on Bio-based Building Materials 2015, Clermont-Ferrand, France, pp. 1–6 (2016)
Bekhta, P., Marutzky, R.: Bending strength and modulus of elasticity of particleboards at various temperatures. Eur. J. Wood Wood Prod. 65(2), 163–165 (2007)
https://www.rowood.net/Portals/0/Documenten/P6-Spaanplaat.pdf. Accessed 23 Dec 2022
Haneef, M., Ceseracciu, L., Canale, C., Bayer, I.S., Heredia-Guerrero, J.A., Atnanassiou, A.: Advanced materials from fungal mycelium: fabrication and tuning of physical properties. Sci. Rep. 7, 41292 (2017). https://doi.org/10.1038/srep41292
Pickering, K.L., Aruan Efendy, M.G., Le, T.M.: A review of recent developments in natural fibre composites and their mechanical performance. Compos. A Appl. Sci. Manuf. 83, 98–112 (2016). https://doi.org/10.1016/j.compositesa.2015.08.038
Elsacker, E., Vandelook, S., Van Wylick, A., Ruytinx, J., De Laet, L., Peeters, E.: A comprehensive framework for the production of mycelium-based lignocellulosic composites. Sci. Total Environ. 725(4), 138431 (2020). https://doi.org/10.1016/j.scitotenv.2020.138431
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Appendix
Appendix
1.1 Supplementary Figure 1
1.2 Supplementary Data File 1
Rights and permissions
Copyright information
© 2023 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
La Bianca, I., Vette, J.F., Bontiff, N. (2023). Exploring the Potential of Mycelium Composites as Natural Board Materials. In: Amziane, S., Merta, I., Page, J. (eds) Bio-Based Building Materials. ICBBM 2023. RILEM Bookseries, vol 45. Springer, Cham. https://doi.org/10.1007/978-3-031-33465-8_50
Download citation
DOI: https://doi.org/10.1007/978-3-031-33465-8_50
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-33464-1
Online ISBN: 978-3-031-33465-8
eBook Packages: EngineeringEngineering (R0)