Abstract
To solve the identification problem of single-phase break fault with power-side grounding (SPBF-PG) and single-phase break fault with load-side grounding (SPBF-LG), a protection method of single-phase break for distribution network is proposed, which is based on current ratio between negative and zero sequence current. The variation characteristics of sequence current of SPBF-PG and SPBF-LG are analyzed by using compound sequence network. Then the protection criterion of negative-zero sequence current amplitude ratio is constructed. This paper presents a new protection method for single-phase break fault (SPBF) which is not affected by line break location, load variation and transition resistance. The method is verified to be correct by simulation.
This work was supported by the National Natural Science Foundation of China (52207075).
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Tang, T., Huang, C., Li, Z., Yuan, X.:Identifying faulty feeder for single-phase high impedance fault in resonant grounding distribution system. Energies 12, 598 (2019)
Wang, S., Zhang, H., Xu, B.: Diagnosis of the type of single-phase disconnection and ground fault in the small current grounding system. Electr. Power Autom. Equipment 38(7), 134–139+147 (2018)
Wang, M., Lv, Y., Zou, H.: Analysis of lightning-caused break mechanism of 10 kV insulation-covered conductors and its countermeasures. High Voltage Eng. 33(1), 102–105 (2007)
Shen, H., Chen, W., Wang, S.: Simulation tests on lightning stroke-caused wire-breakage of 10 kV overhead transmission line. Power Syst. Technol. 35(01), 117–121 (2011)
Xue, Y., Chen, M., Cao, L.: Analysis of voltage characteristics of single-phase disconnection fault in ungrounded distribution system. Proc. CSEE 41(4), 1322–1333 (2021)
Zhang, L., Cao, L., Li, L.: Analysis and fault section location of single-phase open fault for ungrounding system. Power Syst. Prot. Control 46(16), 1–7 (2018)
Zhang, H., Cao, L., Feng, G.: Analysis of single-phase open fault for resonant grounded system. Proc. CSU-EPSA 31(2), 58–65 (2019)
Suwo, W., Zhang, Y., Yun, S.: Open-line fault diagnosis based on data association of MV distribution network. Electr. Power Autom. Equipment 37(7), 101–109 (2017)
Guo, N., Yun, S., Tian, Y.: Disconnected unground fault detection in medium voltage distribution network based on FC-AdaBoost. Electr. Meas. Instrum. 56(16), 1–6 (2019)
Chang, Z., Song, G., Zhang, W.: Characteristic analysis and fault segment location on negative sequence voltage and current of single-phase line breakage fault in distribution network. Power Syst. Technol. 44(8), 3065–3072 (2020)
Xiao, Y., Ouyang, J., Xiong, X.: Protection method of compound break fault with grounding for distribution network considering influence of fault resistance. Power Syst. Technol. 45(11), 4296–4307 (2021)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 ICST Institute for Computer Sciences, Social Informatics and Telecommunications Engineering
About this paper
Cite this paper
Li, X., Tang, T., Zhou, Y., Yang, Z. (2023). Fault Protection Method of Single-Phase Break for Distribution Network Based on Current Ratio Between Negative and Zero Sequence Current. In: Yang, H., Fei, J., Qiang, T. (eds) Smart Grid and Innovative Frontiers in Telecommunications. SmartGIFT 2022. Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering, vol 483. Springer, Cham. https://doi.org/10.1007/978-3-031-31733-0_7
Download citation
DOI: https://doi.org/10.1007/978-3-031-31733-0_7
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-31732-3
Online ISBN: 978-3-031-31733-0
eBook Packages: Computer ScienceComputer Science (R0)