Abstract
The paper presents the Portuguese experience in the precision evaluation of test methods for hot mix asphalt (AC 14 surf and AC 20 base). The repeatability and reproducibility values were determined based on Proficiency Test Schemes involving several laboratories. The tests were performed from 2007 until 2021. The paper analyses the soluble binder content, maximum density (Method A), bulk density (Procedure B), and Marshall properties (stability and flow). The results were compared with the European standards’ precision data. The analysis confirmed a wide variation of the precision data. Precision was not always constant, but, in some cases, it did seem to be influenced by the characteristics of the bituminous mixture, contrary to the variation presented in the test standards. In general, a lower reproducibility was observed.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
RELACRE Homepage. Accessed 12 April 2021. https://www.relacre.pt
Neves, J., Duarte, A.M., Almeida, C., Silva, C., Candeias, R.: Analysis of Portuguese experience on proficiency tests schemes in concrete and aggregates. In: 2nd International Proficiency Testing Conference, Romania (2009)
Neves, J., Duarte, A.M., Silva, C., Candeias, R.: Contribution of PTS to the laboratory and in situ studies related to soils compaction tests. In: 4th International Proficiency Testing Conference, Romania (2013)
CEN: EN 13108-1. Bituminous mixtures – Material specifications – Part 1: Asphalt Concrete. European Committee for Standardization, Belgium (2016)
IP: CETO – Caderno de Encargos Tipo Obra. Materials (Specifications). Portuguese Road Administration (In Portuguese) (2014)
ISO/IEC: ISO/IEC 17043. Conformity assessment – General requirements for proficiency testing (2010)
CEN: EN ISO/IEC 17025. General requirements for the competence of testing and calibration laboratories. European Committee for Standardization, Belgium (2018)
CEN: EN 12697-28. Bituminous mixtures – Test methods – Part 28: Preparation of samples for determining binder content, water content and grading. European Committee for Standardization, Belgium (2020)
CEN: EN 12697-30. Bituminous mixtures – Test methods – Part 30: Specimen preparation by impact compactor. European Committee for Standardization, Belgium (2018)
ISO: ISO 5725-1. Accuracy (trueness and precision) of measurement methods and results. Part 1: general principles and definitions. International Organization for Standardization, Switzerland (1994)
ISO: ISO 5725-2. Accuracy (trueness and precision) of measurement methods and results. Part 2: Basic method for the determination of repeatability and reproducibility of a standard measurement method. International Organization for Standardization, Switzerland (1994)
ISO: ISO 13528. Statistical methods for use in proficiency testing by interlaboratory comparisons. International Organization for Standardization, Switzerland (2005).
CEN: EN 12697-1. Bituminous mixtures – Test methods – Part 1: Soluble binder content. European Committee for Standardization, Belgium (2020)
CEN: EN 12697-5. Bituminous mixtures – Test methods – Part 5: Determination of the maximum density. European Committee for Standardization, Belgium (2018)
CEN: EN 12697-6. Bituminous mixtures – Test methods – Part 6: Determination of bulk density of bituminous specimens. European Committee for Standardization, Belgium (2020)
CEN: EN 12697-34. Bituminous mixtures – Test methods – Part 34: Marshall test. European Committee for Standardization, Belgium (2020)
RELACRE: Materiais de construção – Misturas Betuminosas 2021. Relatório Final. Referência EAP/MC/202, Edição 1, Associação de Laboratórios Acreditados de Portugal, Lisboa (In Portuguese) (2021)
Neves, J.: Comparison of binder content determination by centrifuge extractor and ignition test methods for HMA. In: International Airfield & Highway Pavements Conference, US (2019)
This work is part of the research activity carried out at Civil Engineering Research and Innovation for Sustainability (CERIS) and has been funded by Fundação para a Ciência e a Tecnologia (FCT) in the framework of project UIDB/04625/2020.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Neves, J., Silva, C., Duarte, A. (2023). Precision of Test Methods for Hot Mix Asphalt. In: Chastre, C., et al. Testing and Experimentation in Civil Engineering. TEST&E 2022. RILEM Bookseries, vol 41. Springer, Cham. https://doi.org/10.1007/978-3-031-29191-3_21
Download citation
DOI: https://doi.org/10.1007/978-3-031-29191-3_21
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-29190-6
Online ISBN: 978-3-031-29191-3
eBook Packages: EngineeringEngineering (R0)