Abstract
Predicting temperature field in a Gas Tungsten Arc Welding process is essential and precondition for any study of thermal or mechanical behavior of the weld. In fact, thermal, material proprieties and physical phenomena have to be taken into account in order to predict welding morphology, residual stresses and the final product quality of the weld. In the case of analytical studies, simulations are done with many simplifications that affect result precision. In this study, a 2D numerical model is developed by taking into account heat transfer and distribution of heat source. Gaussian distribution for heat source is presented and simulated by using Finite Difference Method (FDM) with explicit scheme. This method permits following the evolution of temperature field throughout the studied material during welding process. Also, operating parameters effects on melted zone such as current welding and shielding gas have been discussed.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Laazizi, A., et al.: Applied multi-pulsed laser in surface treatment and numerical–experimental analysis. J. Opt. Laser Tech. 43(7), 1257–1263 (2011)
Traidia, A.: Multiphysics modelling and numerical simulation of GTA weld pools. PhD thesis Ecole Polytechnique Paris (2011)
Zhu, X.K., Chao, Y.J.: Effects of temperature-dependent material properties on welding simulation. J. Comput. Struct. 80, 967–976 (2002). https://doi.org/10.1016/S0045-7949(02)00040-8
Rong, Y., Xu, J., Huang, Y., Zhang, G.: Review on finite element analysis of welding deformation and residual stress. J. Sci. Technol. Welding Joining 23(3), 198–208 (2018). https://doi.org/10.1080/13621718.2017.1361673
Tao, J., Zhang, T.C., Liu, P.T., Li, J.: Numerical computation of a linear friction welding process. J. Mater. Sci. Forum 575–578, 811–815 (2008). https://doi.org/10.4028/www.scientific.net/msf.575-578.811
Kutelu, B.J., Seidu, S.O., Eghabor, G.I., Ibitoye, A.I.: Review of GTAW welding parameters. J. Minerals Mater. Charact. Eng. 6, 541–554 (2018). https://doi.org/10.4236/jmmce.2018.65039
Subodh, K., Shahi, A.S.: Effect of heat input on the microstructure and mechanical properties of gas tungsten arc welded AISI 304 stainless steel joints. Mater. Des. 32, 3617–3623 (2011). https://doi.org/10.1016/j.matdes.2011.02.017
Rosenthal, D.: Mathematical theory of heat distribution during welding and cutting. J. Welding. 20, 220–234 (1941)
Poorhaydari, K., Patchett, B.M., Ivey, D.: Estimation of cooling rate in the welding of plates with intermediate thickness. J. Suppl. Welding. (2005)
Song, S., Pei, X., Dong, P.: Analytical interpretation of welding linear heat input for 2d residual stress models. In: ASME 2015 Pressure Vessels and Piping Conference. https://doi.org/10.1115/PVP2015-45753
Nunes, Jr. A.C.: An extended Rosenthal weld model. J. Welding J. (1983)
Mazuco, F., Teixeira, P.R., Bezerra de Araújo, D.: Two heat source models to simulate welding processes with magnetic deflection. Soldagem & Inspeção (2017)
Karadeniz, E., Ozsarac, U., Yildiz, C.: The effect of process parameters on penetration in gas metal arc welding processes. J. Mater. Des. 28, 649–656 (2007)
Kerrich, D.: Contribution a l'etude du parametrage du procede de soudage tig (sans métal d'apport et avec apport de fil chaud): application aux cas des eprouvettes tubulaires. phd thesis universite des sciences & techniques de lille. (1997)
Kah, P., Martikainen, J.: Influence of shielding gases in the welding of metals. 1411–1421 (2013). https://doi.org/10.1007/s00170-012-4111-6
Anbarasan, N., Jerome, S.: Effect of flow rate and argon-hydrogen shielding gas mixture on weld bead morphology of inconel 718. Mater. Today: Proc. 5(2018), 26990–26996 (2018). https://doi.org/10.1016/j.matpr.2018.09.002
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Bensada, M., Laazizi, A., Fri, K., Fajoui, J. (2023). Numerical Simulation of Weld Thermal Efficiency GTAW Process. In: Azrar, L., et al. Advances in Integrated Design and Production II. CIP 2022. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-031-23615-0_36
Download citation
DOI: https://doi.org/10.1007/978-3-031-23615-0_36
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-23614-3
Online ISBN: 978-3-031-23615-0
eBook Packages: EngineeringEngineering (R0)