Abstract
Steel sheet is still the most widespread base material in the production of stampings. Due to its shape, the sheet metal is predestined for surface forming. Even complex, dimensional components can be produced from a flat semi-finished product as easily, quickly, and cheaply. Technical processing of new materials with new properties brings several problems because, in most cases, the indicators of their technological processability – compressibility – deteriorate. Verification of the compressibility of the material is therefore often necessary. The basic assessment of the formability of steel sheets is performed using the characteristic values of the basic sheet metal tests. Based on the results of these tests, it is possible to get a clear idea of the properties of the material and its potential use in practice. This paper aims to monitor the technological parameters in the sheet metal drawing process, their tribological characteristics, and the overall impact on the sheet metal drawing process.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Technology of surface forming-drawing. Technology II. TU Liberec. http://www.ksp.tul.cz/cz/kpt/obsah/vyuka/skripta_tkp/sekce/09.htm. Accessed 22 February 2022.
Marticek, M. (2010). Study of friction conditions during the deep drawing of cylindrical extracts. Master thesis, TU Košice.
Mold Technology. Deep drawing. http://mold-technology4all.blogspot.cz/2011/08/deep-drawing.html. Accessed 15 March 2022.
Fichema. http://www.fichema.cz/. Accessed 6 March 2022.
Get Kaung. Metal deep drawing of car panel. http://www.getkaung.com.tw/mobile/metal-deepdrawing/metal-deep-drawingof-car-panel.html. Accessed 21 April 2022.
Quia. Conventional spinning. https://www.quia.com/jg/1961543list.html
Metal deep drawing process of sheet metal forming. http://techminy.com/metal-deep-drawingprocess. Accessed 20 April 2022.
ITWDrawform. Product features. http://www.itwdrawnmetals.com/product-features/default.html. Accessed 12 March 2022.
Pacaiova, H., Sinay, J., Turisova, R., et al. (2017). Measuring the qualitative factors on copper wire surface. Measurement, 109, 359–365.
Wang, L., Zhou, H., & Li, N. (2020). Carrier transport composites with suppressed glass-transition for stable planar perovskite solar cells. Journal of Materials Chemistry A, 8(28), 14106–14113.
Heath, G., Silvermann, T., Kempe, M., et al. (2020). Research and development priorities for silicon photovoltaic module recycling to support a circular economy. Nature Energy, 5(7), 502–510.
Straka, M., Khouri, S., et al. (2018). Utilization of computer simulation for waste separation design as a logistics system. International Journal of Simulation Modelling, 17(4), 83–596.
Knapčíková, L., Herzog, M., & Oravec, P. (2010). Material characterization of composite materials from used tires. Výrobné inžinierstvo, 4, 31–34.
Liu, J., Gaynor, A. T., Chen, S., Kang, Z., Suresh, K., Takezawa, A., Li, L., Kato, J., Tang, J., Wang, C. C. L., et al. (2018). Current and future trends in topology optimization for additive manufacturing. Structural and Multidisciplinary Optimization, 2018(57), 2457–2483.
Straka, M., Rosova, A., et al. (2018). Principles of computer simulation designfor the needs of improvement of the raw materials combined transport system. Acta Montanistica Slovaca, 23, 163–174.
Kaufmann, S. A. (1993). The origins of order: Self-organization and selection in evolution. Oxford University Press.
Mandičák, T., Mesároš, P., & Tkáč, M. (2018). Impact of management decisions based on managerial competencies and skills developed trough BIM technology on performance of construction enterprises. Pollack Periodica, 13(3), 131–140.
Hosford, W. F. (2010). Mechanical behavior of materials. Cambridge University Press.
Fiebig, S., Sellschopp, J., Manz, H., Vietor, T., Axmann, K., & Schumacher, A. (2015). Future challenges for topology optimization for the usage in automotive lightweight design technologies. In Proceedings of the 11th world congress on structural and multidisciplinary optimization, Sydney, Australia, 7–12 June 2015, Vol. 142, pp. 1–8.
Singh, R., & Davim, J. P. (2018). Additive manufacturing: Applications and innovations (1st ed., p. 280). CRC Press.
Li, N., Huang, S., Zhang, G., Qin, R., Liu, W., Xiong, H., Shi, G., & Blackburn, J. (2019). Progress in additive manufacturing on new materials: A review. Journal of Materials Science and Technology, 2019(35), 242–269.
Sinay, J., Balazikova, M., Dulebova, M., et al. (2018). Measurement of low-frequency noise during CNC machining and its assessment. Measurement, 119, 190–195.
Liu, J., Gaynor, A. T., Chen, S., Kang, Z., Suresh, K., Takezawa, A., Li, L., Kato, J., Tang, J., Wang, C. C. L., et al. (2018). Current and future trends in topology optimization for additive manufacturing. Structural and Multidisciplinary Optimization, 57, 2457–2483.
Kanáliková, A., Behúnová, A., Mandičák, T., & Mesároš, P. (2019). New technologies for sustaining development in infrastructure, logistics and construction industry. Acta Logistica, 6(4), 171–177.
Al-Salamah, M. (2016). Economic production quantity in batch manufacturing with imperfect quality, imperfect inspecyion and non-desructive acceptance sampling in a two-tier market. Computers and Industrial Engineering, 93, 275–285.
Lin, C. C., & Wang, T. H. (2011). Build-to-order supply chain network design under supply and demand uncertainties. Transportation Research Part B, 45, 1162–1176.
Smeringaiova, A., & Wittner, M. (2018). Parametric modeling as efficient way of designing. MM Science Journal, 12, 2701–2705.
Gaspar, S., & Pasko, J. (2018). Mathematical formulation of the kinematic equations for the control of the robot system with application for the machining conical surfaces. MM Science Journal, 2018, 2158–2161.
Merzliakov, I., Pavlenko, I., Chekh, O., Sharapov, S., & Ivanov, V. (2020). Mathematical modeling of operating process and technological features for designing the vortex type liquid-vapor jet apparatus. In V. Ivanov et al. (Eds.), Advances in design, simulation and manufacturing II. DSMIE 2019 (Lecture Notes in Mechanical Engineering) (pp. 613–622). Springer. https://doi.org/10.1007/978-3-030-22365-6_61
Voloshina, А., Panchenko, А., Panchenko, I., Titova, O., & Zasiadko, A. (2019). Improving the output characteristics of planetary hydraulic machines. IOP Conference Series: Materials Science and Engineering, 708(1), 012038. https://doi.org/10.1088/1757-899X/708/1/012038
Khovanskyi, S., Pavlenko, I., Pitel, J., Mizakova, J., Ochowiak, M., & Grechka, I. (2019). Solving the coupled aerodynamic and thermal problem for modeling the air distribution devices with perforated plates. Energies, 12(18), 3488. https://doi.org/10.3390/en12183488
Acknowledgements
This work was supported by the project VEGA 1/0268/22-granted by the Ministry of Education, Science, Research and Sport of the Slovak Republic.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Martiček, M., Tauberová, R., Knapčíková, L., Husár, J. (2023). Fundamentals of Monitoring the Technological Parameters by Deep Drawing Process: A Study. In: Knapčíková, L., Peraković, D. (eds) 7th EAI International Conference on Management of Manufacturing Systems. MMS 2022. EAI/Springer Innovations in Communication and Computing. Springer, Cham. https://doi.org/10.1007/978-3-031-22719-6_13
Download citation
DOI: https://doi.org/10.1007/978-3-031-22719-6_13
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-22718-9
Online ISBN: 978-3-031-22719-6
eBook Packages: EngineeringEngineering (R0)