Skip to main content
SpringerLink
Log in

Influence of Dressing Parameters on Surface Roughness and Wheel Life in Internal Grinding SKD11 Tool Steel

  • Conference paper
  • First Online:
Advances in Engineering Research and Application (ICERA 2022)

Part of the book series: Lecture Notes in Networks and Systems ((LNNS,volume 602))

Included in the following conference series:

  • 673 Accesses

Abstract

This paper presents a multi-objective study on internal grinding to achieve minimum surface roughness (SR) and maximum wheel life (WL) at the same time. This study looked at six input parameters: coarse dressing depth ar, coarse dressing time nr, fine dressing depth af, fine dressing time nf, non-feeding dressing n0, and dressing feed rate Sd. The effect of these parameters on the SR and WL of the grinding process was investigated. Furthermore, optimal input parameters to achieve SR and WL at the same time were proposed. It was also reported that the optimal set of input dressing parameters was appropriate for use.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Log in via an institution
Chapter
USD 29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD 219.00
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book
USD 279.99
Price excludes VAT (USA)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

References

  1. Inasaki, I.: Monitoring and optimization of internal grinding process. CIRP Ann. 40(1), 359–362 (1991)

    Article  Google Scholar 

  2. Xiao, G., Malkin, S.: On-line optimization for internal plunge grinding. CIRP Ann. 45(1), 287–292 (1996)

    Article  Google Scholar 

  3. Hung, L.X., et al.: Determination of optimal exchanged grinding wheel diameter when internally grinding alloy tool steel 9CrSi. In: IOP Conference Series: Materials Science and Engineering. IOP Publishing (2018)

    Google Scholar 

  4. Hung, L.X., et al.: A study on coolant parameters in internal grinding of 9CrSi steel. In: Materials Science Forum. Trans Tech Publ (2019)

    Google Scholar 

  5. Tran, T.-H., et al.: Optimization of replaced grinding wheel diameter for minimum grinding cost in internal grinding. Appl. Sci. 9(7), 1363 (2019)

    Article  Google Scholar 

  6. Gao, S., Yang, C., Xu, J., Fu, Y., Su, H., Ding, W.: Optimization for internal traverse grinding of valves based on wheel deflection. Int. J. Adv. Manuf. Technol. 92(1–4), 1105–1112 (2017). https://doi.org/10.1007/s00170-017-0210-8

    Article  Google Scholar 

  7. Hung, L.X., et al.: A study on calculation of optimum exchanged grinding wheel diameter when internal grinding. Mater. Today: Proc. 18, 2840–2847 (2019)

    Google Scholar 

  8. Hung, L.X., et al.: Multi-objective optimization of dressing parameters of internal cylindrical grinding for 9CrSi Aloy steel using taguchi method and grey relational analysis. Mater. Today: Proc. 18, 2257–2264 (2019)

    Google Scholar 

  9. Nguyen, A.T., et al.: Optimization of dressing parameters for minimum surface roughness and maximum material removal rate in internal grinding of SKD11 tool steel. In: E3S Web of Conferences. EDP Sciences (2021)

    Google Scholar 

  10. Hung, L.X., et al. Determining the optimum set of dressing parameters satisfying minimum surface roughness when conducting the internal grinding of hardened SKD11 steel. In: Solid State Phenomena. Trans Tech Publ (2021)

    Google Scholar 

  11. Nguyen, H.-Q., et al.: A comparative study on multi-criteria decision-making in dressing process for internal grinding. Machines 10(5), 303 (2022)

    Article  Google Scholar 

Download references

Acknowledgments

This work was supported by Thai Nguyen University of Technology.

Author information

Authors and Affiliations

  1. Vinh Long University of Technology Education, Vinh Long, Vietnam

    Tran Huu Danh

  2. Electric Power University, Hanoi, Vietnam

    Nguyen Hong Linh

  3. University of Transport and Communications, Hanoi, Vietnam

    Bui Thanh Danh

  4. University of Economics—Technology for Industries, Ho Chi Minh City, Vietnam

    Nguyen Anh Tuan

  5. Thai Nguyen University of Technology, Thai Nguyen, Vietnam

    Nguyen Thi Quoc Dung, Hoang Xuan Tu & Le Xuan Hung

Authors
  1. Tran Huu Danh
    View author publications

    You can also search for this author in PubMed Google Scholar

  2. Nguyen Hong Linh
    View author publications

    You can also search for this author in PubMed Google Scholar

  3. Bui Thanh Danh
    View author publications

    You can also search for this author in PubMed Google Scholar

  4. Nguyen Anh Tuan
    View author publications

    You can also search for this author in PubMed Google Scholar

  5. Nguyen Thi Quoc Dung
    View author publications

    You can also search for this author in PubMed Google Scholar

  6. Hoang Xuan Tu
    View author publications

    You can also search for this author in PubMed Google Scholar

  7. Le Xuan Hung
    View author publications

    You can also search for this author in PubMed Google Scholar

Corresponding author

Correspondence to Le Xuan Hung .

Editor information

Editors and Affiliations

  1. Faculty of Electronic Engineering, Thai Nguyen University of Technology, Thai Nguyen, Vietnam

    Duy Cuong Nguyen

  2. Faculty of Mechanical Engineering, Thai Nguyen University of Technology, Thai Nguyen, Vietnam

    Ngoc Pi Vu

  3. Vietnam Association for Science Editing, Hanoi University of Science and Technology, Hanoi, Vietnam

    Banh Tien Long

  4. Institute for Automation and Systems Engineering, Ilmenau University of Technology (IUT), Ilmenau, Germany

    Horst Puta

  5. Department of Computer Science and Automation, Ilmenau University of Technology (IUT), Ilmenau, Germany

    Kai-Uwe Sattler

Rights and permissions

Reprints and permissions

Copyright information

© 2023 The Author(s), under exclusive license to Springer Nature Switzerland AG

About this paper

Check for updates. Verify currency and authenticity via CrossMark

Cite this paper

Danh, T.H. et al. (2023). Influence of Dressing Parameters on Surface Roughness and Wheel Life in Internal Grinding SKD11 Tool Steel. In: Nguyen, D.C., Vu, N.P., Long, B.T., Puta, H., Sattler, KU. (eds) Advances in Engineering Research and Application. ICERA 2022. Lecture Notes in Networks and Systems, vol 602. Springer, Cham. https://doi.org/10.1007/978-3-031-22200-9_64

Download citation

  • DOI: https://doi.org/10.1007/978-3-031-22200-9_64

  • Published:

  • Publisher Name: Springer, Cham

  • Print ISBN: 978-3-031-22199-6

  • Online ISBN: 978-3-031-22200-9

  • eBook Packages: EngineeringEngineering (R0)

Publish with us

Policies and ethics

Search

Navigation