Abstract
Prof. Carlos López-Cajún has been a prestigious figure, who has been admired worldwide also for his unique attitude to combine friendships and scientific activity in working the true spirit of IFToMM for collaboration, sharing, and improving the technology for the benefit of the society in the welfare of human beings. Prof. Carlos López-Cajún has been a great IFToMMist contributing and significantly supporting activities of the Permanent Commission of History of MMS in organization of events and exploration of the history of IFToMM and MMS with very valuable publications. Prof. López-Cajún devoted his acquired knowledge and expertise to the mechanical design, mainly on kinematic optimization of mechanisms, robotics and synchronization of mechanical systems publishing valuable results in papers in recognized journals, books and proceedings of international congresses. He served IFToMM as Member of the PC on History of MMS, member of the Executive Council and also as Secretary General. Moreover, he participated in the organization of the 13th IFToMM World Congress in 2011, and many among many other initiatives he also organized the HMM2016 Symposium in his city Queretaro in 2016.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
Change history
11 January 2023
Correction to: Chapter “Carlos López-Cajún (1948 -2020)” in: M. Ceccarelli and A. Gasparetto (eds.), Distinguished Figures in Mechanism and Machine Science, History of Mechanism and Machine Science 41, https://doi.org/10.1007/978-3-031-18288-4_4
References
Acevedo M, Ceccarelli M (2022) In memory of past PC members—Prof Carlos López-Cajún (1948–2020). In: Ceccarelli M, López-García R (eds) Explorations in the history and heritage of machines and mechanisms—7th international symposium on history of machines and mechanisms (HMM). Springer Nature Switzerland AG, pp 4–5. https://doi.org/10.1007/978-3-030-98499-1_1
Angeles J, López-Cajún C (1988) Optimal synthesis of cam mechanisms with oscillating flat-face followers. Mech Mach Theory 23(1):1–6. https://doi.org/10.1016/0094-114X(88)90002-X
Angeles J, López-Cajún CS (1991) Optimization of cam mechanisms. Kluwer Academic Publishers, Dordrecht
Angeles J, López-Cajún C (1992) Kinematic isotropy and the conditioning index of serial robotic manipulators. Int J Robot Res 11(6):560–571. https://doi.org/10.1177/027836499201100605
Angeles J, Rojas A, Lopez-Cajun CS (1988) Trajectory planning in robotic continuous-path applications. IEEE J Robot Autom 4(4):380–385. https://doi.org/10.1109/56.801
Angeles J, Saha SK, López-Cajún CS (1994a) The design of cam mechanisms with translating flat-face followers under curvature constraints. ASME J Mech Des 116(1):306–310. https://doi.org/10.1115/1.2919363
Angeles J, Saha SK, López-Cajún C (1994b) The design of cam mechanisms with translating flat-face followers under curvature constraints. ASME J Mech Des 116:306–310
Angeles J, Saha SK, González-Palacios M, López-Cajún C (1994c) The design optimization of cam mechanisms with oscillating flat-face followers under curvature constraints. ASME J Mech Des 116:311–314
Carbone G, Lanni C, Ceccarelli M, Lopez-Cajùn C (2001) Dynamic effects of curvature change in the profile of two-circular-arc cams. In: V Congresso Iberoamericano di Ingegneria Mecanica, Merida, CD Proceedings, pp 1247–1252
Ceccarelli M (2013) Twenty-five year of activity in IFToMM. J Theory Mech Mach, St Petersburg State Univ 11(2):3–14. https://tmm.spbstu.ru
Ceccarelli M (2022) Experiences in leadership IFToMM: achievements and challenges. In: Advances in mechanism design III—proceedings of TMM 2020. Springer Nature Switzerland AG, pp 3–16. https://doi.org/10.1007/978-3-030-83594-1_1
Ceccarelli M, Koetsier T (2004) On the IFToMM permanent commission for history of MMS. In: Proceedings of international symposium on history of machines and mechanisms HMM2004, Kluwer, Dordrecht, pp 10–25
Ceccarelli M, López-Cajún CS, Rooney J (2011) IFToMM executive council meeting. Mech Mach Theory 48:140–143. https://doi.org/10.1016/j.mechmachtheory.2011.10.002
Figueroa JDC, Lozano GA, Lopez-Cajun CS, Gonzalez-Hernandez J (2000) Evolution of the machines for the corn tortillas production. In: Proceedings of first international symposium on history of machines and mechanisms HMM2000, Kluwer, Dordrecht, pp 93–100
Figueroa JDC, Morales SE, González-Hernández J, Mauricio SRA, Lozano GA, López-Cajún CS (2004) An electromechanical device for automatically shaping tortillas, snacks, and food products. In: Proceedings 11th world congress in mechanism and machine science, Tianjin, pp 1427–1431
Gasparetto A, Ceccarelli M (2022) Recent advances and challenges in the IFToMM PC for history of MMS. In: Ceccarelli M, López-García R (eds) Explorations in the history and heritage of machines and mechanisms. HMM 2022. History of mechanism and machine science, vol 40. Springer, Cham. https://doi.org/10.1007/978-3-030-98499-1_2
González-Cruz CA, Jáuregui-Correa JC, López-Cajún CS, Sen M (2014) Dynamic behavior and synchronization of an automobile as a complex system. In: Proceedings of the ASME 2014 12th biennial conference on engineering systems design and analysis, vol 1, Copenhagen, 25–27 July 2014, V001T02A003. https://doi.org/10.1115/ESDA2014-20037
González-Cruz CA, Jáuregui-Correa JC, López-Cajún C, Sen M, Domínguez-González A (2015) Experimental analysis of synchronization and dynamics in an automobile as a complex system. Mech Syst Signal Process 60:472–472. https://doi.org/10.1016/j.ymssp.2014.12.028
Hernández-Martínez E, Ceccarelli M, Carbone G, López-Cajún CS, Jáuregui-Correa JC (2010a) Characterization of a cable-based parallel mechanism for measurement purposes. Mech Based Des Struct Mach 38(1):25–49. https://doi.org/10.1080/15397730903386101
Hernández-Martínez E, Conghui L, Carbone G, Ceccarelli M, Lopez‐Cajun CS (2010b) Experimental and numerical characterization of CaPaMan 2bis operation. J Appl Res Technol 8(1):101–119. ISSN 1665-6423
Jáuregui-Correa JC, Hernández EE, Ceccarelli M et al (2013) Kinematic calibration of precise 6-DOF Stewart platform-type positioning systems for radio telescope applications. Front Mech Eng 8:252–260. https://doi.org/10.1007/s11465-013-0249-7
Jáuregui-Correa JC, López-Cajún CS, García-Arredondo A, Hernández-Martínez EE, Ceccarelli M (2015) Validation process of pose accuracy estimation in parallel robots. ASME J Dyn Syst, Meas, Control 137(6):064503. https://doi.org/10.1115/1.4029346
Lanni C, Ceccarelli M, Lopez-Cajun C (2006) An experimental validation of three circular-arc cams with offset followers. J Mech Based Des Struct Mach 34(3):261–276. https://doi.org/10.1080/15397730600830351
López-Cajún CS (2008–2011) Minutes with appendices of IFToMM EC meetings and telemeetings 2008–2011, items: Ab 02-2008, Ab 01-2009, Ab 01-2010, Ab 02-2010, 2010 Ab 03-2010, Ab 01-2011, Ab 02-2011, Ab 03-2011. IFToMM Archives, CISM Udine
López-Cajún CS (2010) José María Lanz y Zaldívar (1764–1839). In: Distinguished figures in mechanism and machine science: their contributions and legacies—part 2. Springer, Dordrecht, pp 111–122. https://doi.org/10.1007/978-90-481-2346-9_6
López-Cajún CS (2018) Curriculum and list of publications. Personal archive, University of Queretaro, Queretaro
López-Cajún CS (2022) ORCID 0000-0001-9011-7795. Accessed 5 June 2022
López-Cajún CS, Ceccarelli M (2008) Mechanisms. Ed. Trillas, Mexico—2nd edn (2013) (in Spanish)
López-Cajún CS, Ceccarelli M (eds) (2016) Explorations in the history of machines and mechanisms. History of mechanism and machine science, vol 32. Springer International Publishing Switzerland, Cham. https://doi.org/10.1007/978-3-319-31184-5_1
López-Cajún CS, Cuadrado Iglesias JI, Ceccarelli M (2004) Early modern activity on TMM by Lanz and Betancourt before 1830. In: 11th IFToMM world congress in mechanism and machine science, Tianjin, pp 939–943
López-Cajún CS, Jáuregui-Correa JC, González-Cruz CA, Rodríguez M (2015) Mechanical reproduction of the horse movement from a hippotherapy cycle. In: Ceccarelli M, Hernández Martinez E (eds) Multibody mechatronic systems. Mechanisms and machine science, vol 25. Springer, Cham. https://doi.org/10.1007/978-3-319-09858-6_35
Lozano-Guzmán A, López-Cajún CS, Tapia-Armas JR (1993) Vibrational levels for trucks’ leaf springs and air suspensions. In: Proceedings of the 11th international modal analysis conference, Kissimmee, Florida, pp 1242–1247. EID: 2-s2.0-0027843605
Rafael M, Lozano A, Cervantes J, Muciño V, López-Cajún CS (2009) A method for powertrain selection of heavy-duty vehicles with fuel savings. Int J Heavy Veh Syst 16(1/2):49–60. https://doi.org/10.1504/IJHVS.2009.023854
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this chapter
Cite this chapter
Ceccarelli, M., Correa, J.C.J. (2023). Carlos López-Cajún (1948–2020). In: Ceccarelli, M., Gasparetto, A. (eds) Distinguished Figures in Mechanism and Machine Science. History of Mechanism and Machine Science, vol 41. Springer, Cham. https://doi.org/10.1007/978-3-031-18288-4_4
Download citation
DOI: https://doi.org/10.1007/978-3-031-18288-4_4
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-18287-7
Online ISBN: 978-3-031-18288-4
eBook Packages: EngineeringEngineering (R0)