Abstract
This paper presents the results of research on superhard coatings obtained by the interaction of high-speed powder clouds with a titanium substrate. High-speed powder clouds were obtained under conditions of a shaped-charge explosion. Shaped-charge synthesis was conducted using specially prepared mixtures containing atoms of nitrogen, carbon, and boron. The interaction of the initial mixture components and the substrate material yielded nitride, carbonitride, and boride phases that formed superhard coatings. The relationship between the mechanical properties of the investigated coatings and their structural state was established in this study. The specific features of the obtained layers were determined by the fact that they are multiphase coatings built into the crystalline structure of the titanium substrate. The microhardness of these layers varies in the range of 11–21 GPa.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Abbreviations
- CE:
-
Container with explosive compound
- CSR:
-
Coherent scattering region
- DC:
-
Detonating charge
- EC:
-
Explosive compound
- F:
-
Distance to the target
- FCC:
-
Face-Centered Cubic lattices
- HCP:
-
Hexagonal close-packed lattices
- MWCNT:
-
Multiwalled carbon nanotubes
- PL:
-
Conical liner with powder
- RC:
-
Reaction chamber components
- TS:
-
Titanium sample
- XRD:
-
X-ray diffraction
- XRF:
-
X-ray fluorescence
References
Ebrahimi A, Esfahani H, Fattah-Alhosseini A, Imantalab O (2018) In-vitro electrochemical study of TiB/TiB2 composite coating on titanium in Ringer’s solution. J Alloys Compd 765:826–834. https://doi.org/10.1016/j.jallcom.2018.06.312
Nikitin PY, Zhukov IA, Matveev AE, Sokolov SD, Boldin MS, Vorozhtsov AB (2020) AlMgB14–TiB2 composite materials obtained by self-propagating high-temperature synthesis and spark plasma sintering. Ceram Int 46(14):22733–22737. https://doi.org/10.1016/j.ceramint.2020.06.039
Akopov FA, Adrianov MA, Amirov RK et al (2017) Composite ceramic based on cubic boron nitride and carbon nanostructures. Refract Ind Ceram 57:496–500. https://doi.org/10.1007/s11148-017-0011-5
Gromilov SA, Alekseev AV, Kirienko IB, Kinelovskii SA (2010) Investigation of W2B and β-WB high-temperature phases in coatings produced by a shaped charge explosion. J Struct Chem 51(6):1126–1131. https://doi.org/10.1007/s10947-010-0171-3
Chai YJ, Li RJ, Wang FY, Yue JW, Wang ZY, Zhou YP and Wang ZF (2017) Coatings of WC/Co prepared by a shaped charge explosion. Gaoya Wuli Xuebao/Chin J High Press Phys 31(2):169–174. https://doi.org/10.11858/gywlxb.2017.02.009
Li UV, Kulkov SS, Kozulin AA, Kinelovskii SA, Kulkov SN (2014) Formation of coatings on titanium substrates obtained from mixtures of tungsten and cobalt salts using shaped-charge explosion. Adv Mater Res 1040:43–46. https://doi.org/10.4028/www.scientific.net/AMR.1040.43
Gromilov SA, Khranenko SP, Semitut EYu, Kireenko IB, Kinelovskii SA (2013) Producing Superhard Coatings by decomposition of complex salts in shaped-charge explosion. Combust Explos Shock Waves 49(2):238–243. https://doi.org/10.1134/S0010508213020160
Nayak B, Menon SVG (2018) Non-equilibrium theory employing enthalpy-based equation of state for binary solid and porous mixtures. Shock Waves V 28(2):141–151. https://doi.org/10.1063/1.4976623
Maevskii K (2019) Modelling of polymorphic phase transitions under shock wave loading. AIP conference proceedings 2103:020009. https://doi.org/10.1063/1.5099873
Gromilov SA, Alekseev AV, Kinelovsky SA, Kireenko IB (2004) Phase compositions of coatings applied to titanium targets by means of shaped-charge jets. Combust Explos Shock Waves 40(3):363–369. https://doi.org/10.1023/B:CESW.0000028950.59685.74
Gromilov SA, Khranenko SP, Semitut EU, Kireenko IB, Kinelovsky SA (2013) Obtaining superhard coatings by shaped-charge deposition and decomposition of complex salts. Combust Explos Shock Waves 49(2):127–132. https://doi.org/10.1134/S0010508213020160
Walters WP, Zukas JA (1989) Fundamentals of shaped charges
Rosenberg Z, Ashuach Y, Yeshurun Y et al (2009) On the main mechanisms for defeating AP projectiles, long rods and shaped charge jets. Int J Impact Eng 36(4):588–596. https://doi.org/10.1016/j.ijimpeng.2008.09.003
Fedorov SV, Ladov SV, Svirsky OV, Vlasova MA (2021). Analysis of the penetration of shaped charges with hemispherical and semi-ellipsoidal liners of degressive thickness. Combust Explosion Shock Waves 57(5):620–634. https://doi.org/10.1134/S0010508221050117
Kul’kov SN, Kinelovskii SA (2008) Structural transformations in zirconia under cumulative explosion conditions. Techn Phys Lett 34(4):274–277. https://doi.org/10.1134/S1063785008040020
Kozulin AA, Kulkov SS, Kinelovsky SA, Kedrinsky VK, Veselov SV, Ruktuev AA, Kulkov SN (2012) Peculiarities of the formation of the structure of shaped-charge coatings containing multi-wall carbon nanotubes and deposited on titanium substrates. Obrab. Metallov (tekhnologiya, oborudovanie, instrumenty) 56:80–83 [in Russian]
Kozulin AA, Vorozhtsov SA, Kulkov SS, Teipel U, and Kulkov SN (2015) Ultrasonic deagglomeration of aluminum nanopowders with multi-walled carbon nanotube mixtures. AIP Conf Proc 1683: 020102. https://doi.org/10.1063/1.4932792
Kinelovskii SA, Alekseev AV, Gromilov SA, Kireenko IB (2006) Formation of a specific layer on the surface of a metallic target interacting with a shaped-charge jet of boron-containing liners. Combust Explos Shock Waves 42(2):231–236. https://doi.org/10.1007/s10573-006-0044-4
Kraus W, Nolze G (1996) POWDER CELL—a program for the representation and manipulation of crystal structures and calculation of the resulting X-ray powder patterns. J Appl Cryst 29:301–303. https://doi.org/10.1107/S0021889895014920
Powder Diffraction File (2009) PDF-2/Release 2009. International centre for diffraction data, USA
ISO 6507–1:2018. Metallic materials Vickers hardness test Part 1: Test method
Gordin DM, Guillou A, Thibon I, Bohn M, Ansel D, Gloriant T (2008) Duplex nitriding treatment of a beta-metastable Ti94Mo6 alloy for biomedical applications. J Alloys Compd 457(1–2):384–388. https://doi.org/10.1016/j.jallcom.2007.02.155
Sarma B, Ravi Chandran KS (2011) Accelerated kinetics of surface hardening by diffusion near phase transition temperature: mechanism of growth of boride layers on titanium. Acta Mater 59:4216–4228. https://doi.org/10.1016/j.actamat.2011.03.046
Acknowledgements
This work was carried out with financial support from the Ministry of Education and Science of the Russian Federation (State assignment No. FSWM-2020-0028). The research was carried out with the equipment of Tomsk Regional Core Shared Research Facilities Center of National Research Tomsk State University. The Center was supported by the Ministry of Science and Higher Education of the Russian Federation Grant no. 075-15-2021-693 (no. 13.RFC.21.0012).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this chapter
Cite this chapter
Kanzamanova, G., Kinelovskii, S.A., Kozulin, A.A. (2023). Shaped-Charge Treatment Effects Accompanying the Formation of Hard Structure and New Phase States in Coatings on Titanium. In: Orlov, M.Y., Visakh P. M. (eds) Behavior of Materials under Impact, Explosion, High Pressures and Dynamic Strain Rates. Advanced Structured Materials, vol 176. Springer, Cham. https://doi.org/10.1007/978-3-031-17073-7_5
Download citation
DOI: https://doi.org/10.1007/978-3-031-17073-7_5
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-17072-0
Online ISBN: 978-3-031-17073-7
eBook Packages: EngineeringEngineering (R0)