Abstract
Innovative silicone self-adhesive materials in the form of single-sided tapes with high values of self-adhesive properties were obtained. These materials were obtained by modification of silicone resin with addition of sepiolite. Both pure and hydrochloric acid sepiolite modified was used in this work and characterized by FTIR (Fourier transform infrared), XRD (X-ray diffraction), BET (Brunauer–Emmett–Teller) spectroscopy, among others. The modified adhesive compositions obtained in this way were used to produce silicone adhesive tapes with improved thermal resistance. The adhesive materials obtained with these additives show better cohesion, shrinkage and thermal resistance compared to the composition without modification.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Markets and Marets Raport: Adhesive Tapes Market by Resin Type (Acrylic, Rubber, Silicone), Backing Material (PP, Paper, PVC), Technology (Solvent, Hot-Melt, Water Based), End-Use Industry (Packaging, Healthcare, E&E, Automotive) and Region—Global Forecast to 2025
Ebnesajjad, S.: Handbook of Adhesives and Surface Preparation Technology, Applications and Manufacturing 3–13. Elsevier, Oxford (2011)
Ciannamea, E.M., Ruseckaite, R.A.: Pressure sensitive adhesives based on epoxidized soybean oil: correlation between curing conditions and rheological properties. J. Am. Oil Chem. Soc. 95, 525–532 (2018)
Czech, Z., Kabatc, J., Bartkowiak, M., Licbarski, A., Mozelewska, K., Kwiatkowska, D.: Novel photoreactive pressure-sensitive adhesives (PSA) based on acrylics containing additionable photoinitiators. Materials 13, 5151 (2020)
Czech, Z., Butwin, A.: New developments in the area of solvent-borne acrylic pressure-sensitive adhesives. J. Adhe. Sci. Tech. 23, 1689–1707 (2009)
Moon, H., Jeong, K., Kwak, M.J., Choi, S.Q., Im, S.G.: Solvent-free deposition of ultrathin copolymer films with tunable viscoelasticity for application to pressure-sensitive adhesives. ACS App. Mater. Inter. 10, 32668–32677 (2018)
Al-Moghazy, M., Mahmoud, M., Nada, A.A.: Fabrication of cellulose-based adhesive composite as an active packaging material to extend the shelf life of cheese. Inter. J. Biol. Macromol. 160, 264–275 (2020)
Athavale, S.P.: Hand Book of Pressure Sensitive Adhesives and Coatings: Pressure Sensitive Adhesives Technology. Notion Press (2018)
Benedek, I.: Pressure-Sensitive Adhesives. In Handbook of Adhesive Technology, pp. 471–508. CRC Press (2017)
Meng, W., Gao, W., Zhu, L., Liu, M., Qu, X.: Preparation of polyacrylic latex with external crosslinking and its effect on the pressure-sensitive properties. Soft Mater. 18, 432–442 (2020)
Kowalczyk, A., Kowalczyk, K., Weisbrodt, M.: Int. J. Adhes. Adhes. 85, 286–292 (2018)
Antosik, A.K, Ragańska, P, Czech, Z.: Termiczne sieciowanie samoprzylepnych klejów silikonowych nadtelenkami organicznymi. Polimery (2014). https://doi.org/10.14314/polimery.2014.792
Antosik, A.K., Bednarczyk, P., Czech, Z.: Jednostronnie klejące taśmy na bazie samoprzylepnych klejów silikonowych—dobór najlepszej kompozycji. Chemik 69, 95–97 (2015)
Antosik, A.K., Bednarczyk, P., Czech, Z.: Aging of silicone pressure-sensitive adhesives. Polym. Bull. (2017). https://doi.org/10.1007/s00289-017-2083-2
Han, J., Zhou, Y., Bai, G., Wei, W., Liu, X., Li, X.: Preparation of photo-crosslinkable acrylic copolymer and its debonding property on silicon wafer. J. Adhe. Scie. Tech. 1–13 (2021)
Lin, S.B., Durfee, L.D., Ekeland, R.A., McVie, J., Schalau, G.K.: Recent advances in silicone pressure-sensitive adhesives. J. Adhe. Scie. Tech. 21(7), 605–623 (2007)
Lee, K., Tiu, B.D.B., Martchenko, V., Mai, K., Lee, G., Gerst, M., Messersmith, P.B.: A modular strategy for functional pressure sensitive adhesives. ACS App. Mater. Inter. 13, 3161–3165 (2021)
Tong, Y., Yuan, Q., Huang, F.: Preparation and characterization of silicon-containing polyarylacetylene/montmorilloite nanocomposites. J. Macromole. Scie. Part B 58, 469–488 (2019)
Gaom, G., Zhangm, S., Wangm, L., Linm, J., Qim, H., Zhum, J., Chum, M.: Developing highly tough, heat-resistant blend thermosets based on silicon-containing arylacetylene: a material genome approach. ACS App. Mater. Inter. 12(24), 27587–27597 (2020)
Cai, M., Yuan, Q., Huang, F.: Catalytic effect of poly (silicon-containing arylacetylene) with terminal acetylene on the curing reaction and properties of a bisphenol A type cyanate ester. Polym. Int. 67, 1563–1571 (2018)
Demir, I., Savaş, M., Yaprak, H., Doğan, O., Ӧzel, G.: Investigation of effect of sepiolite on the properties of autoclaved aerated concrete, CWB-6 359–365 (2015)
Shang, Q., Feng, H., Feng, Z., Chen, N., Tan, L., Qiu, J., Wu, H.: Facile fabrication of sepiolite functionalized composites with tunable dielectric properties and their superior microwave absorption performance. J. Colloid Inter. Sci. 576, 444–456 (2020)
Mortazavi, S., Aghaei, H.: Make proper surfaces for immobilization of enzymes: Immobilization of lipase and α-amylase on modified Na-sepiolite. Int. J Biol. Macromol. 164, 1–12 (2020)
Henriques, R.R., Soares, B.G.: Sepiolite modified with phosphonium ionic liquids as anticorrosive pigment for epoxy coatings. Appl. Clay Sci. 200, 105890 (2021)
Wu, J., Wang, Y., Wu, Z., Gao, Y., Li, X.: Adsorption properties and mechanism of sepiolite modified by anionic and cationic surfactants on oxytetracycline from aqueous solutions. Sci. Total Environ. 708, 134409 (2020)
Duncan, B., Abbott, S., Roberts, R.: Measurement good practice guide no. 26: adhesive tack. National Phys. Lab. (1999)
Wilpiszewska, K., Czech, Z.: Citric acid modified potato starch films containing microcrystalline cellulose reinforcement—properties and application. Starch (2014). https://doi.org/10.1002/star.201300093
Chruściel, J., Graczyk, T.: Otrzymywanie i właściwości elastomerowych silikonowych warstw antyadhezyjnych na papierze i pergaminie. Polimery 51, 3 (2006)
Stempień, Z., Tokarska, M., Gniotek, K.: UV radiation measurement system for the UV curing of fluids disposed on textiles. Fib. Text. East. Euro. 78, 59–62 (2010)
Tomblin, J., Harter, P., Seneviratne, W., Yang, C.: Characterization of bondline thickness effects in adhesive joints. J. Com. Tech. Res. 24/2, 332–344 (2002). https://doi.org/10.1520/CTR10562J
Yeh, H.-Y., Tandjung, D.: Mixed mode fracture analysis of the lap shear specimen test per ASTM D1002. J. Rein. Plast. Com. (2005). https://doi.org/10.1177/0731684405047771
Tang, Q., Wang, F., Liang, M.T.J., Ren, C.: Study on pore distribution and formation rule of sepiolite mineral nanomaterials. J. Nanomaterials, ID 382603 (2012). https://doi.org/10.1155/2012/382603
Sing, K.S.W., Everett, D.H., Haul, R.A.W., Moscou, L., Pietrotti, R.A., Rouquėrol, J., Siemieniewska, T.: Reporting physisorption data for gas/solid systems with special reference to the determination of surface area and porosity. Pure. Appl. Chem. 57(4), 603–619 (1985). https://doi.org/10.1351/pac198557040603
Yao, Q.-Z., Yu, S.-H., Zhao, T.-L., Qian, F.-J., Li, H., Zhou, G.-T., Fu, S.-Q.: Enhanced potential toxic metal removal using a novel hierarchical SiO2-Mg(OH)2 nanocomposite derived from sepiolite. Minerals 9, 298 (2019). https://doi.org/10.3390/min9050298
Funding
This research was funded by the National Center for Research and Development (NCBiR) as part of the LIDER initiative. Project number LIDER/9/0028/L-11/19/NCBR/2020.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Antosik, A.K., Gziut, K., Musik, M., Miądlicki, P., Weisbrodt, M. (2023). Development and Characterization of Silicone Pressure-Sensitive Adhesives Modified Sepiolite for Self-Adhesive Tape Applications. In: da Silva, L.F.M., Adams, R.D., Dilger, K. (eds) 2nd International Conference on Industrial Applications of Adhesives 2022 . Proceedings in Engineering Mechanics. Springer, Cham. https://doi.org/10.1007/978-3-031-11150-1_2
Download citation
DOI: https://doi.org/10.1007/978-3-031-11150-1_2
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-11149-5
Online ISBN: 978-3-031-11150-1
eBook Packages: EngineeringEngineering (R0)