Abstract
This research proposes to design a Goland wing structure using a two-step approach that concerns the last step uncertainty. The first step starts with performing the design optimization for multi-purposes followed by the design of wing mass, stress, and buckling factor and the reliability test of all solution set. Due to the aircraft wing being subjected to aerodynamics loads, both the structure failure and the material can deviate from the optimum result. A vortex lattice method is used for aerodynamics analysis, the finite element method is analyzed by the structural failure. These techniques are expected to reduce the complexity of Reliability-Based Design Optimization (RBDO). The Latin hypercube sampling method is used to quantify uncertainties of the aircraft wing structural design so that the experimental results including the solution sets are more acceptable and reliable which the proposed approach can be an alternative way for the RBDO technique.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
López, C., Baldomir, A., Hernández, S.: The relevance of reliability-based topology optimization in early deign stages of aircraft structures. Struct. Multidisc. Optim. 55(3), 1121–1141 (2017)
D’Ippolito, R., Donders, S., Hack, M., Van Der Linden, G., Vandepitte, D.: Reliability-based design optimization of composite and steel aerospace structures. In: Proceeding of 47th AIAA/ASME/ASCE/AHS/ASC Structures, Structural Dynamics and Materials Conference, pp. 6621–6633. Newport, RI, USA (2006)
Elishakoff, I., Colombi, P.: Combination of probabilistic and convex models of uncertainty when scarce knowledge is present on acoustic excitation parameters. Comput. Methods Appl. Mech. Eng. 104, 187–209 (1993)
Manan, A., Cooper, J.: Design of composite wings including uncertainties: a probabilistic approach. JA Aircr. 46(2), 601–607 (2009)
Scarth, C., Cooper, J.E., Weaver, P.M., Silva, G.H.C.: Uncertainty quantification of aeroelastic stability of composite plate wings using lamination parameters. Compos. Struct. 116(1), 84–93 (2014)
Scarth, C., Cooper, J.E.: Reliability-based aeroelastic design of composite plate wings using a stability margin. Struct. Multidiscip. Optim. 57(4), 1695–1709 (2017). https://doi.org/10.1007/s00158-017-1838-6
Papageorgiou, A., Tarkian, M., Amadori, K., Ölvander, J.: Multidisciplinary design optimization of aerial vehicles: a review of recent advancements. Int. J. Aerosp. Eng. 2018, 1–21 (2018)
Helton, J.C., Davis, F.J.: Latin hypercube sampling and the propagation of uncertainty in analyses of complex systems. Reliab. Eng. Syst. Saf. 81(1), 23–69 (2003)
Pholdee, N., Bureerat, S.: An efficient optimum latin hypercube sampling technique based on sequencing optimisation using simulated annealing. Int. J. Syst. Sci. 46(10), 1780–1789 (2015)
Wansaseub, K., Sleesongsom, S., Panagant, N., Pholdee, N., Bureerat, S.: Surrogate-assisted reliability optimisation of an aircraft wing with static and dynamic aeroelastic constraints. Int. J. Aeronaut. Space Sci. 21(3), 723–732 (2020). https://doi.org/10.1007/s42405-019-00246-6
Fang, J., Smith, S.M., Elishakoff, I.: Combination of anti-optimization and fuzzy-set-based analyses for structural optimization under uncertainty. Math. Probl. Eng. 4, 187–200 (1998)
Moller, B., Graf, W., Beer, M.: Fuzzy structural analysis using α-level optimization. Comput. Mech. 26, 547–565 (2000)
Tang, Z.C., Lu, Z.Z., Hu, J.X.: An efficient approach for design optimization of structures involving fuzzy variables. Fuzzy Sets Syst. 255, 52–73 (2014)
Yin, H., Yu, D., Xia, R.: Reliability-based topology optimization for structures using fuzzy set model. Comput. Methods Appl. Mech. Eng. 333, 197–217 (2018)
Sleesongsom, S., Yooyen, S., Prapamonthon, P., Bureerat, S.: Reliability-based design optimization of classical wing aeroelasticity. In: IOP Conference Series: Materials Science and Engineering, vol. 886, no. 1 (2020)
Sleesongsom, S., Bureerat, S.: Multi-objective reliability-based topology optimization of structures using a fuzzy set model. J. Mech. Sci. Technol. 34(10), 3973–3980 (2020)
Sleesongsom, S., Bureerat, S.: Multi-objective and reliability-based design optimization of a steering linkage. Appl. Sci. 10(17), 5748 (2020)
Wang, L., Lui, G., Qiu, Z.: Review: recent developments in the uncertainty-based aero-structural design optimization for aerospace vehicles. J. Harbin Inst. Technol. 25(3), 1–15 (2018)
Winyangkul, S., Sleesongsom, S., Bureerat, S.: Reliability-based design of an aircraft wing using a fuzzy-based metaheuristic. Appl. Sci. 11(14), 6463 (2021)
Sleesongsom, S., Winyangkul, S., Bureerat, S.: Reliability-based design of an aircraft wing using a fuzzy-based metaheuristic. In: Proceedings of the ASME 2021 International Mechanical Engineering Congress and Expositionvol. 13: Safety Engineering, Risk, and Reliability Analysis; Research Posters. Virtual, V013T14A016, pp. 1–5. ASME, November 2021
Ho-Huu, V., Duong-Gia, D., Vo-Duy, T., Le-Duc, T., Nguyen-Thoi, T.: An efficient combination of multi-objective evolutionary optimization and reliability analysis for reliability-based design optimization of truss structures. Expert Syst. Appl. 102, 262–272 (2018)
Sleesongsom, S., Bureerat, S.: New conceptual design of aeroelastic wing structures by multi objective optimization. Eng. Optim. 45(1), 107–122 (2013)
Sleesongsom, S., Bureerat, S., Tai, K.: Aircraft morphing wing design by using partial topology optimization. Struct. Multidiscip. Optim. 48(6), 1109–1128 (2013). https://doi.org/10.1007/s00158-013-0944-3
Sleesongsom, S., Bureerat, S.: Morphing wing structural optimization using opposite-based population-based incremental learning and multigrid ground elements. Math. Probl. Eng. 2015, 730626 (2015)
Acknowledgements
The authors are grateful for the program and the financial support provided by King Mongkut’s Institute of Technology Ladkrabang and the National Research Council Thailand (N42A650549)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 Springer Nature Switzerland AG
About this paper
Cite this paper
Chanu, S., Wattanathorn, A., Senpong, M., Sleesongsom, S. (2022). Reliability-Based Design Optimization of a Goland Wing with a Two-Step Approach. In: Tan, Y., Shi, Y., Niu, B. (eds) Advances in Swarm Intelligence. ICSI 2022. Lecture Notes in Computer Science, vol 13345. Springer, Cham. https://doi.org/10.1007/978-3-031-09726-3_36
Download citation
DOI: https://doi.org/10.1007/978-3-031-09726-3_36
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-09725-6
Online ISBN: 978-3-031-09726-3
eBook Packages: Computer ScienceComputer Science (R0)