Abstract
Musculoskeletal models are limited in their clinical application by the complexity of their personalization. In this work we present a novel and general approach for the reconstruction of the individual joint kinematics that may provide a reference for the personalization of more complex models. The approach relies on the principle of virtual work and obtains the joint motion by imposing reciprocity between instantaneous helical axis and joint constraints. As a case of study, we investigate a cadaveric knee, whose motion was experimentally measured for validation. Comparison between computed and experimental motion resulted in maximum mean rotational and translational errors of 2.6 ± 0.9° and 1.2 ± 0.7 mm, respectively, supporting the efficacy of the presented approach.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Smith, S.H., Coppack, R.J., van den Bogert, A.J., Bennett, A.N., Bull, A.M.: Review of musculoskeletal modelling in a clinical setting: current use in rehabilitation design, surgical decision making and healthcare interventions. Clin. Biomech. 83, 105292 (2021)
Beillas, P., Papaioannou, G., Tashman, S., Yang, K.H.: A new method to investigate in vivo knee behavior using a finite element model of the lower limb. J. Biomech. 37(7), 1019–1030 (2004)
Harris, M.D., et al.: A combined experimental and computational approach to subject-specific analysis of knee joint laxity. J. Biomech. Eng. 138(8), 081004 (2016)
Jung, Y., Phan, C.B., Koo, S.: Intra-articular knee contact force estimation during walking using force-reaction elements and subject-specific joint model. J. Biomech. Eng. 138(2), 021016 (2016)
Sancisi, N., Parenti-Castelli, V.: A sequentially-defined stiffness model of the knee. Mech. Mach. Theory 46(12), 1920–1928 (2011)
Sancisi, N., Parenti-Castelli, V.: A 1-dof parallel spherical wrist for the modelling of the knee passive motion. Mech. Mach. Theory 45(4), 658–665 (2010)
Blankevoort, L., Huiskes, R.: Validation of a three-dimensionalmodel of the knee. J. Biomech. 29(7), 955–961 (1996)
Guess, T.M., Thiagarajan, G., Kia, M., Mishra, M.: A subject specific multibody model of the knee with menisci. Med. Eng. Phys. 32(5), 505–515 (2010)
Mootanah, R., et al.: Development and validation of a computational model of the knee joint for the evaluation of surgical treatments for osteoarthritis. Comput. Methods Biomech. Biomed. Eng. 17(13), 1502–1517 (2014)
Conconi, M., Leardini, A., Parenti-Castelli, V.: Joint kinematics from functional adaptation: a validation on the tibio-talar articulation. J. Biomech. 48(12), 2960–2967 (2015)
Conconi, M., Sancisi, N., Parenti-Castelli, V.: Prediction of individual knee kinematics from an MRI representation of the articular surfaces. IEEE Trans. Biomed. Eng. 68(3), 1084–1092 (2020)
Smale, K.B., et al.: Effect of implementing magnetic resonance imaging for patient-specific OpenSim models on lower-body kinematics and knee ligament lengths. J. Biomech. 83, 9–15 (2019)
Martelli, S., et al.: The relationship between tibiofemoral geometry and musculoskeletal function during normal activity. Gait Posture 80, 374–382 (2020)
Conconi, M., Montefiori, E., Sancisi, N., Mazzà, C.: Modeling musculoskeletal dynamics during gait: evaluating the best personalization strategy through model anatomical consistency. Appl. Sci. 11(18), 8348 (2021)
Conconi, M., Sancisi, N., Parenti-Castelli, V.: The geometrical arrangement of knee constraints that makes natural motion possible: theoretical and experimental analysis. J. Biomech. Eng. 141(5), 051001 (2019)
Conconi, M., Sancisi, N., Parenti-Castelli, V.: The geometrical arrangement of joint constraints that makes natural motion possible: experimental verification on the ankle. In: Lenarčič, J., Siciliano, B. (eds.) ARK 2020. SPAR, vol. 15, pp. 109–116. Springer, Cham (2021). https://doi.org/10.1007/978-3-030-50975-0_14
Forlani, M., Sancisi, N., Conconi, M., Parenti-Castelli, V.: A new test rig for static and dynamic evaluation of knee motion based on a cable-driven parallel manipulator loading system. Meccanica 51(7), 1571–1581 (2015). https://doi.org/10.1007/s11012-015-0124-1
Tashman, S., Anderst, W.: In-vivo measurement of dynamic joint motion using high speed biplane radiography and CT: application to canine ACL deficiency. J. Biomech. Eng. 125(2), 238–245 (2003)
Grood, E.S., Suntay, W.J.: A joint coordinate system for the clinical description of three-dimensional motions: application to the knee. J. Biomech. Eng. 105(2), 136–144 (1983)
Braz, P., Silva, W.: Meniscus morphometric study in humans. J. Morphol. Sci. 27(2), 62–66 (2010)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Conconi, M., Sancisi, N., Parenti-Castelli, V. (2022). Exploiting Reciprocity Between Constraints and Instantaneous Motion to Reconstruct Individual Knee Kinematics. In: Altuzarra, O., Kecskeméthy, A. (eds) Advances in Robot Kinematics 2022. ARK 2022. Springer Proceedings in Advanced Robotics, vol 24. Springer, Cham. https://doi.org/10.1007/978-3-031-08140-8_40
Download citation
DOI: https://doi.org/10.1007/978-3-031-08140-8_40
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-08139-2
Online ISBN: 978-3-031-08140-8
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)