Abstract
Printed Circuit Boards (PCBs) are components with increasing use for many applications. The industrial production of these components led to a situation of necessary efficient automation performance, for their production, and, mainly, of test systems for their quality control during the production process. Quality control of PCBs is a very complex task and the development of automatic testing machines is an asset for this purpose. This work is focused on the development of a vision system to be used in an automatic machine for testing PCBs in a systematic and automated procedure. The test procedure developed for PCBs is based on the development of a tool composed of needles that, when coming into contact with PCBs at predetermined contact points, allow the measurement of different predefined parameters and conclusion on their quality. The task of checking and controlling the quality of these needles, in the developed tool, is also automated, requiring a vision system to ensure that these needles meet the requirements for their assembly. This vision system is capable of detecting problems in the needle beds, and it is important to assess whether they will be able to be embedded in the PCBs, taking this process into account.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Freitas, L., et al.: Conceptual design of a positioning system for systematic production of needle beds. In: Machado, J., Soares, F., Trojanowska, J., Yildirim, S. (eds.) icieng 2021. LNME, pp. 221–235. Springer, Cham (2022). https://doi.org/10.1007/978-3-030-79168-1_21
Balter, M., Chen, A., Maguire, T., Yarmush, M.: Adaptive kinematic control of a robotic venipuncture device based on stereo vision, ultrasound, and force guidance. IEEE Trans. Industr. Electron. 64, 1626–1635 (2017). https://doi.org/10.1109/TIE.2016.2557306
Zhang, L., Li, C., Fan, Y., Zhang, X., Zhao, J.: Physician-friendly tool center point calibration method for robot-assisted puncture surgery. Sensors 21(2), 366 (2021). https://doi.org/10.3390/s21020366
Zhang, Z., et al.: Research on the knitting needle detection system of a hosiery machine based on machine vision. Text. Res. J. 90, 004051751989917 (2020). https://doi.org/10.1177/0040517519899173
Pereira, F., Carvalho, V., Vasconcelos, R., Soares, F.: A review in the use of artificial intelligence in textile industry. In: Machado, J., Soares, F., Trojanowska, J., Yildirim, S. (eds.) icieng 2021. LNME, pp. 377–392. Springer, Cham (2022). https://doi.org/10.1007/978-3-030-79168-1_34
Yang, J., Li, S., Wang, Z., Yang, G.: Real-time tiny part defect detection system in manufacturing using deep learning. IEEE Access 7, 89278–89291 (2019). https://doi.org/10.1109/ACCESS.2019.2925561
Li, B.: Research on geometric dimension measurement system of shaft parts based on machine vision. EURASIP J. Image Video Process. 2018(1), 1–9 (2018). https://doi.org/10.1186/s13640-018-0339-x
Golnabi, H., Asadpour, A.: Design and application of industrial machine vision systems. Robot. Comput.-Integr. Manuf. 23(6), 630–637 (2007). ISSN 0736-5845. https://doi.org/10.1016/j.rcim.2007.02.005
Rusenov, B., et al.: Machine vision systems for intelligent quality control of manufacturing processes. In: TECHSYS 2017 (2017)
Bhowmik, D., Appiah, K.: Embedded vision systems: a review of the literature. In: Voros, N., Huebner, M., Keramidas, G., Goehringer, D., Antonopoulos, C., Diniz, P.C. (eds.) ARC 2018. LNCS, vol. 10824, pp. 204–216. Springer, Cham (2018). https://doi.org/10.1007/978-3-319-78890-6_17
Silva, M., Pereira, F., Soares, F., Leão, C.P., Machado, J., Carvalho, V.: An overview of industrial communication networks. In: Flores, P., Viadero, F. (eds.) New Trends in Mechanism and Machine Science. MMS, vol. 24, pp. 933–940. Springer, Cham (2015). https://doi.org/10.1007/978-3-319-09411-3_97
Leão, C.P., Soares, F.O., Machado, J.M., Seabra, E., Rodrigues, H.: Design and development of an industrial network laboratory. Int. J. Emerg. Technol. Learn. 6(Special Issue 2), 21–26 (2011) https://doi.org/10.3991/ijet.v6iS1.1615
OMRON homepage. https://industrial.omron.pt/pt/products/fq2. Accessed 02 Dec 2021
I.-T. Solutions. http://www.insidelimits.pt/. Accessed 02 Dec 2021
Acknowledgments
This work is co-funded by the European Regional Development Fund (ERDF) through the North Regional Operational Program (NORTE 2020) of the Portugal 2020 Program [Project No. 43922, with acronym “iFixturing”; Funding Reference NORTE-01-0247-FEDER-043922].
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Pereira, F. et al. (2022). Design of a Vision System for Needles’ Beds Positioning Inspection: An Industrial Application. In: Hamrol, A., Grabowska, M., Maletič, D. (eds) Advances in Manufacturing III. MANUFACTURING 2022. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-031-00218-2_12
Download citation
DOI: https://doi.org/10.1007/978-3-031-00218-2_12
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-031-00166-6
Online ISBN: 978-3-031-00218-2
eBook Packages: EngineeringEngineering (R0)