Abstract
In this paper, both ends of the on-board weighing devices are not fixed simultaneously to prevent the force constraints from affecting the measurement accuracy of the sensor. According to the test results with analysis and the market feedback on small batch production and sales of prototype, a weighing method innovation and device development for on-board sensors of logistics vehicles are proposed The base end of the sensor is fixed with the axle, and the other end can work in two states with a safety device. The safety device can be lifted in the upper position to keep the sensors off the carriage without weighing for safe transportation. In the lower place, the carriage and the on-board sensors are in uniform contact to realize weighing without restriction. The influence of random interference factors is eliminated, and the bottleneck problem of on-board dynamic weighing technology is solved.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Xi, J.: Parking information interaction of global internet of things based on the timer and elastic pressure switch sensor combination. Appl. Mech. Mater. 614, 497–502 (2014)
Xi, J., Han, C.: Parking navigation system based on the double signal double display intersection vehicle terminal and automobile internal information. Appl. Mech. Mater. 803–808 (2014)
Xi, J.: Global internet of things garage system wite parking information release of timer control. Meas. Control Technol. 33(9), 128–130 (2014)
Xi, J.: Self-organizing IOV technology oriented vehicle driving and parking service using vehicle terminal. J. Comput. Sci. Technol. 41(11A), 466–467 (2014)
Xi, J.: Parking information release and booking park equipment for garage system on the Internet of things. J. Comput. Appl. 34(S1), 306–308 (2014)
Wang, L., Xi, J., Han, C., Qiao, S.: One dimensional angle linear weighing method for multi fulcrum weighing system. CN108489578A (2018)
Huang, W., et al.: Node localization method for wireless sensor networks in one dimensional linear region. CN104703277B (2018)
Han, C., Xi, J.: Vehicle terminal space labyrinth module. CN103522963B (2017)
Xi, J., Daihong, J., Han, C.: A crossover vehicle terminal with dual channel and double screen. CN103528594B (2017)
Liu, A., Xi, J.: Non contact detection system of mixture parameters based on vehicle terminal interaction. CN103674776B (2017)
Wang, S., et al.: A logistics dynamic weighing sorting integrated device. CN110252678A (2019)
Wang, L., et al.: A dynamic weighing equipment for logistics transportation. CN209727234U (2019)
Yu, J., et al.: An electronic driving scale with stable installation and anti-collision. CN110260960A (2020)
Fang, E., et al.: A dynamic weighing device. CN210375366U (2020)
Wang, L., et al: A kind of vehicle weighing equipment. CN212363390U (2021)
Xuzhou University of Technology: Weighing in motion self-calibration algorithm software. 2018SR670312 (2018)
Xuzhou University of Technology: Dynamic electronic weighing system software. 2018SR632550 (2018)
Xuzhou University of Technology: Intelligent weighing dynamic memory management system. 2019SR1078748 (2019)
Xuzhou University of Technology: Dynamic digital weighing automatic management system. 2019SR1078732 (2019)
Xuzhou University of Technology: Calibration and optimization software for vehicle weigh in motion. 2019SR1141072 (2019)
Xuzhou University of Technology: Key technology research and development of one dimensional linear dynamic weighing electronic device. Science and Technology Novelty Search Report 2017-036, Xuzhou science and Technology Information Institute of Jiangsu Province (2017)
Xuzhou University of Technology: Load cell test report. Beijing Institute of aerospace metrology and testing technology (authorized by the State Administration of science, technology and industry for national defense, Certificate No.: National Defense industry-JLJG-1-003), Certificate No.: TJ1c2019-04-07386, Calibration certificate of load cell FYXZ-07 (2019)
Acknowledgements
The authors acknowledge the Jiangsu University Natural Science Research Project (18KJB470024) and Provincial Construction System Science and Technology Project of Jiangsu Provincial Housing and Urban-Rural Construction Department (2018ZD088). This work is partly supported by the Natural Science Foundation of Jiangsu Province of China (No. BK20161165), the applied fundamental research Foundation of Xuzhou of China (No. KC17072). The authorized patents for invention are also the research and development of Jiangsu Province Industry-University-Research Cooperation Project (BY2019056).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 ICST Institute for Computer Sciences, Social Informatics and Telecommunications Engineering
About this paper
Cite this paper
Fang, E., Zhou, Y., Li, D. (2022). Research on Weighing Method Innovation and Device Development for On-Board Sensors of Logistics Vehicle. In: Jiang, D., Song, H. (eds) Simulation Tools and Techniques. SIMUtools 2021. Lecture Notes of the Institute for Computer Sciences, Social Informatics and Telecommunications Engineering, vol 424. Springer, Cham. https://doi.org/10.1007/978-3-030-97124-3_35
Download citation
DOI: https://doi.org/10.1007/978-3-030-97124-3_35
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-97123-6
Online ISBN: 978-3-030-97124-3
eBook Packages: Computer ScienceComputer Science (R0)