Abstract
Coaxial laser material deposition is a manufacturing process for Additive Manufacturing (AM) based on wire and powder deposition materials. The materials to be processed are melted by the laser radiation and deposited accordingly, so that the generative manufacturing of structures, the coating of surfaces and the repair of components are possible. The process can be used to process many fusible materials in the material classes of metals, ceramics and polymers. In order to map the processes and adapt them to the different materials, appropriate system technology is required, which places special demands on the laser beam sources and guidance used as well as the handling of the deposition materials.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Kaierle, S., Barroi, A., Noelke, C., Hermsdorf, J., Overmeyer, L., Haferkamp, H.: Review on laser deposition welding: From micro to macro. Physics Procedia 39(2012), 336–345 (Lane 2012, Elsevier B.V, 2012).
Rafiee, M., Farahani, R. D., Therriault, D.: Multi-material 3D and 4D printing: A survey. Adv. Sci. 7, 1902307 (WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim, 2020)
Schneberger, J.-H., Häfele, T., Kaspar, J., Vielhaber, M.: Hybrid Additive manufacturing—requirements engineering framework for process chain considerations. In: Proceedings of the 22nd International Conference on Engineering Design (ICED19), Delft, The Netherlands, 5–8 August 2019 (2019). https://doi.org/10.1017/dsi.2019.372
Aversa, A., Fino, P.: Special issue on materials development by additive manufacturing techniques. Appl. Sci. 2020, 10, 5119 (MDPI, Basel, Switzerland, 2020). https://doi.org/10.3390/app10155119
Frigger, M., Müller-Czygan, G.: Was ist Systemtechnik? Einer zukunftsweisenden Methodik auf der Spur. Whitepaper der HST Systemtechnik GmbH & Co. KG, Meschede (2019)
VDI 2206: VDI-Richtlinie: Entwicklungsmethodik für mechatronische Systeme (2004)
Gräßler, I., Hentze, J., Bruckmann, T.: V-models for interdisciplinary systems engineering. In: Marjanovic, D. (Hrsg.), Storga, M. (Hrsg.), Pavkovic, N. (Hrsg.), Bojcetic, N. (Hrsg.), Skec, S. (Hrsg.) Proceedings of the DESIGN 2018 15th International Design Conference, S. 747–756 (2018). https://doi.org/10.21278/idc.2018.0333
Knöchelmann, M., Ley, P.-P., Kloppenburg, G., Mozgova, I., Lachmayer, R.: Methodische Entwicklung eines opto-mechatronischen Systems am Beispiel eines hochadaptiven Fahrzeugscheinwerfers. In: Tagungsband der VDI Fachtagung Mechatronik 2019. Universität Padeborn, Paderborn (2019)
Ley, P.-P. et al.: Development methodology for optomechatronic systems using the example of a high-resolution projection module. In Proceedings of the 22nd International Conference on Engineering Design (ICED19), Delft, The Netherlands, 5–8 August 2019 (2019). https://doi.org/10.1017/dsi.2019.261
Ley, P., August, J., Lachmayer, R.: Design tool to develop highly efficient optomechatronic systems. Proc. Des. Soc. Des. Conf. 1, 305–314 (2020). https://doi.org/10.1017/dsd.2020.270
VDI 2221: VDI-Richtlinie: Design of technical products and systems—Model of product design (2019)
VDI 2225 Blatt 3, VDI-Richtlinie: Design Engineering Methodics—Engineering Design at Optimum Cost—Valuation of Costs (1998)
REFA: Industrial Engineering—Standardmethoden zur Produktivitätssteigerung und Prozessoptimierung, Carl Hanser (2011). ISBN-10 3-46-43062-8
Xu, X.F., Bates, P.J., Zak, G.: Effect of glass fiber and crystallinity on light transmission during laser transmission welding of thermoplastics. Optics Laser Technol. 69(June 2015), 133–139 (2014). https://doi.org/10.1016/j.optlastec.2014.12.025
Reza, F., Katayoun, K.A.M., Farzaneh, A., Nikoo, T.: Laser in orthodontics. In: Principles in Contemporary Orthodontics (InTech, 2011). https://doi.org/10.5772/20204
Patschger, A.: Grundlegende Untersuchungen zum Prozessverständnis des Laserstrahl-Mikroschweißens von metallischen Folien. In: Bergmann, J.P.: Fertigungstechnik – aus den Grundlagen für die Anwendung, Schriften aus der Ilmenauer Fertigungstechnik Band 3, Universitätsverlag Ilmenau (2016)
Hipp, D.: Einkopplung von Laserstrahlung unter Prozessbedingungen der Materialbearbeitung - Entwicklung einer Bestimmungsmethodik und Ergebnisse, Technische Universität Dresden (201). https://nbn-resolving.org/urn:nbn:de:bsz:14-qucosa2-724992
Prasad, H.S.: Phenomena in material addition to laser generated melt pools. Luleå University of Technology, Luleå, Sweden (2019)
Murr, L. E., Johnson, W. L.: 3D metal droplet printing development and advanced materials additive manufacturing. Brazilian Metallurgical, Materials and Mining Association. Published by Elsevier Editora Ltd. (2016). https://doi.org/10.1016/j.jmrt.2016.11.002
Da Silva, A., Frostevarg, J., Volpp, J., Kaplan, A.F.H.: Additive Manufacturing by laser-assisted drop deposition from a metal wire. Mater. Des. 209(2021), 109987 (2021). https://doi.org/10.1016/j.matdes.2021.109987
Halisch, C., Radel, T., Tyralla, D., Seefeld, T.: Measuring the melt pool size in a wire arc additive manufacturing process using a high dynamic range two-colored pyrometric camera. Welding World (2020). https://doi.org/10.1007/s40194-020-00892-5
Eimer, E., Suder, W., Williams, S., Ding, J.: Wire laser arc additive manufacture of aluminium zinc alloys. Welding World (2020). https://doi.org/10.1007/s40194-020-00872-9
Kotz, F., Helmer, D., Rapp, B.E.: 3D printing of transparent glasses. In: Heinrich, A. (ed.) 3D printing of optical components. Springer series in optical sciences, vol. 233 (Springer Nature, Switzerland AG, 2021). https://doi.org/10.1007/978-3-030-58960-8
Rettschlag, K., Kranert, F., Hohnholz, A., Wienke, A., Suttmann, O., Neumann, J., Kracht, D., Lachmayer, R.: Laser deposition of fused silica coreless fibers to generate functional waveguides. In: Lasers in Manufacturing Conference 2019 (2019)
Grabe, T., Rettschlag, K., Wang, S., Lachmayer, R. (eds.): Modellierung und Evaluation thermischer Effekte für die laserbasierte Additive Fertigung von funktionalen Glaswellenleitern, Konstruktion für die Additive Fertigung 2020 (Springer Vieweg, Berlin, Heidelberg, 2020)
Pohl, L., von Witzendorf, P., Chatzizyrli, E., Suttmann, O., Overmeyer, L.: CO2 laser welding of glass: Numerical simulation and experimental study. Int. J. Adv. Manuf. Technol. 90(1–4), 397–403 (2017)
von Witzendorf, P., Pohl, L., Suttmann, O., Heinrich, P., Heinrich, A., Zander, J., Bragard, H., Kaierle, S.: Additive manufacturing of glass: CO2-Laser glass deposition printing in [Procedia CIRP 74], 74, 272–275 (2018)
Lammers, M., Hermsdorf, J., Kaierle, S., Ahlers, H.: Entwicklung von Laser-Systemkomponenten für das koaxiale Laser-Draht-Auftragschweißen von Metall- und Glaswerkstoffen, in Konstruktion für die Additive Fertigung 2019, 245–260. Springer, Berlin Heidelberg (2020)
Luo, J., Gilbert, L.J., Bristow, D.A., Landers, R.G., Goldstein, J.T., Urbas, A.M., Kinzel, E.C.: Additive manufacturing of glass for optical applications. In: Gu, B., Helvajian, H., Piqué, A. (eds.) Laser 3D Manufacturing III, SPIE Proceedings, 97380Y, SPIE (2016)
Kelbassa, J., Gasser, A., Pirch, N.: Wire vs. Powder in LMD, Presentation at LAM 2018, 29 March 2018 (Fraunhofer ILT, Schaumburg, 2018)
Brocke, N.: 3D-Generieren mit ProFocus Direktdioden- Laser für Pulver und Draht, https://oscar-plt.de/wp-content/uploads/2020/07/Flyer_ProFocus.pdf (OSCAR PLT GmbH). Date of last access 20 Sept 2021
Hummel, M., Schöler, C., Häusler, A., Gillner, A., Poprawe, R.: New approaches on laser micro welding of copper by using a laser beam source with a wavelength of 450 nm. J. Adv. Joining Process. 1 (2020). https://doi.org/10.1016/j.jajp.2020.100012
Serafini, V., Riva, M., Pippione, G., Mirigaldi, A., Coriasso, C., Codato, S., Gotta, P., Maina, A., Paoletti, R., Perrone, G.: Compact high-brightness and highly manufacturable blue laser modules. In: Proceeding of SPIE 11668, High-Power Diode Laser Technology XIX, 116680J (10 Mar 2021) (2021). https://doi.org/10.1117/12.2583229
Lee, H., Lim, C.H.J., Low, M.J., Tham, N., Murukeshan, V.M., Kim, Y.J.: Lasers in additive manufacturing: A review. Int. J. Precision Eng. Manuf. Green Technol. 4(3), 307–322 (2017). https://doi.org/10.1007/s40684-017-0037-7
Fraunhofer IWS COAXwire. https://www.iws.fraunhofer.de/de/technologiefelder/thermische_oberflaechentechnik/auftragschweissen/systemtechnik/COAXwire.html. Date of last access 20 Sept 2021
Fraunhofer IWS COAXwire mini. https://www.iws.fraunhofer.de/de/technologiefelder/thermische_oberflaechentechnik/auftragschweissen/systemtechnik/COAXwire_mini.html, Date of last access 20 Sept 2021
Walters, C., Hay, J., Ream, S.: Fully reflective, coaxial laser wire additive manufacturing, A focusing optic in development enables very high laser power capability in wire additive manufacturing. https://www.iws.fraunhofer.de/de/technologiefelder/thermische_oberflaechentechnik/auftragschweissen/systemtechnik/COAXwire_mini.html, Date of last access 20 Sept 2021
Fraunhofer ILT. https://www.ilt.fraunhofer.de/content/dam/ilt/en/documents/annual_reports/AR16/TF2/AR16_P64_coaxial-wire-feed-laser-metal-deposition.pdf, Date of last access 20 Sept 2021
Precitec coax printer. https://www.precitec.com/de/laserschweissen/produkte/bearbeitungskoepfe/coax-printer/, Date of last access 20 Sept 2021
Lammers, M., Biester, K., Hermsdorf, J., Kaierle, S., Ahlers, H.: Förderung von stabförmigen Schweißzusatzstoffen für das koaxiale Laserauftragschweißen von Glas- und Metallwerkstoffen, in: Tagungsband 4. Symposium Materialtechnik, 25. Bis 26. Februar 2021, Band 10, Clausthaler Zentrum für Materialtechnik, TU Clausthal (2021).
Meltio M450. https://meltio3d.com/technology/, Date of last access 20 Sept 2021
Eppich, B.: Laser beam characterization, Präsentation LA3NET—Workshop Aachen 2013, Leibniz Ferdinant-Braun-Institut (2013)
Rung, S., Barth, J., Hellmann, R.: Characterization of laser beam shaping optics based on their ablation geometry of thin films. Micromachines 2014(5), 943–953 (2013). https://doi.org/10.3390/mi5040943
Eichler, J., Dünkel, L., Eppich, B.: Die Strahlqualität von Lasern, Wie bestimmt man Beugungsmaßzahl und Strahldurchmesser in der Praxis? www.laser-journal.de (LTJ, 2004)
Kroyan, A., Lalovic, I., Farrar, N.: Effects of 95% integral vs. FWHM bandwidth specifications on lithographic. In: Imaging, September 2001 Proceedings of SPIE—the international society for optical engineering (2001). https://doi.org/10.1117/12.435661
ISO 11146: Lasers and Laser-Related Equipment—Test Methods for Laser Beam Parameters—Beam Widths, Divergence Angle and Beam Propagation Factor (International Standard, 1998)
Liu, S., Zhang, Y., Kovacevic, R.: Numerical simulation and experimental study of powder flow distribution in high power direct diode laser cladding process. Springer, New York (2015)
Lammers, M., Bernhard, R., Neef, P., Wiche, H., Hoff, C., Hermsdorf, J., Kaierle, S., Ahlers, H., Wesling, V.: Koaxiales Laser-Pulver-Auftragschweißen mit zentraler Schweißgutzufuhr über ein Kapillarröhrchen zur Steigerung der Pulverausnutzung, erschienen. In: Konstruktion für die Additive Fertigung 2020 (Springer, 2020)
Arrizubieta, J.I., Ruiz, J.E., Martinez, S., Ukar, E., Lamikiz, A.: Intelligent nozzle design for the laser deposition process in the industry 4.0. In: Manufacturing Engineering Society International Conference 2017, MESIC 2017, 28–30 June 2017, Vigo (Pontevedra) Spain (2017)
Grabe, T., Lammers, M., Wang, S., Wang, X., Rettschlag, K., Sleiman, K., Barroi, A., Biermann, T., Ziebehl, A., Röttger, J., Ley, P.-P., Wolf, A., Jaeschke, P., Hermsdorf, J., Kaierle, S., Ahlers, H., Lachmayer, R.: Additive anufacturing of fused silica using coaxial laser glass deposition: experiment, simulation and discussion. In: Proceeding of SPIE 11677, Laser 3D Manufacturing VIII, 116770Z (8 Mar 2021) (2021). https://doi.org/10.1117/12.2577205
Luo, J.: Additive manufacturing of glass using a filament fed process. Dissertation, Missouri, USA (2017)
Schuler, V., Twrdek, J.: Praxiswissen Schweißtechnik. Werkstoffe, Prozesse, Fertigung. 6. Aufl. Springer Vieweg Verlag. Wiesbaden 2019, S. 56 (2019)
Matthes, K.-J., Schneider, W. (Hrsg.): Schweißtechnik. Schweißen von metallischen Konstruktionswerkstoffen. 6. Aufl. Carl Hanser Verlag. München 2016, S. 87ff. (2016)
Jeffus, L.: Welding. Principles and Applications. 9. Aufl. Cengage Learning 2020, S. 297 (2020)
Dilthey, U.: Schweißtechnische Fertigungsverfahren 1. Schweiß- und Schneidtechnologien. 3. Aufl. Springer Verlag Berlin Heidelberg, S. 83 (2006)
Von Witzendorff, P., Pohl, L., Suttmann, O., Heinrich, P., Heinrich, A., Zander, J., Bragard, H., Kaierle, S.: Additive manufacturing of glass: CO2-Laser glass deposition printing. In: Procedia CIRP 74, S. 272–275 (2018)
Rettschlag, K., Kranert, F., Hohnholz, A., Wienke, A., Suttmann, O., Neumann, J., Kracht, D., Lachmayer, R.: Laser deposition of fused silica coreless fibers to generate functional waveguides. Lasers Manuf. 2019 (LiM 2019) (2019)
Dzelnitzki, D.: Schweißen von Leichtmetallen verlangt modifizierte Prozesse. Was ein Drahtvorschub-System zum Laserschweißen leisten muss. Laser Technik J 5(5), S. 36–39 (2008)
Klingbeil, N.: Untersuchung des Drahtsystems zur Prozessstabilisierung für das drahtbasierte Laserauftragschweißen in der additiven Fertigung, Dissertation, Aachen (2019)
DVS Media GmbH (Hrsg.): Drahtförderschlauch Rolliner mindert Reibung und Verschleiß. In: SCHWEISSEN UND SCHNEIDEN, S. 656–657 (2007)
EUTECT GmbH: Sensitive Wire Feeder (SWF), https://eutect.de/modulare-loetautomation/verbindungstechnik/drahtvorschuebe/swf/. Date of last access 21Sept 2021
Pamin, S., Grafe, M., Lammers, M., Hermsdorf, J., Kaierle, S., Overmeyer, L.: Rotary straightening of fine wire for LMD-W applications. In: Lasers Manufacturing Conference 2021 (2021)
GTV Verschleißschutz GmbH: Pulverförderer Serie Pf, Für jede Anwendung die passende Lösung, https://www.gtv-mbh.com/cms/upload/downloads/pulverfoerderer-de.pdf. Date of last access 27 Sept 2021
Schweitzer-Karababa, Iris: Explosionsschutz an Staubarbeitsplätzen, baua: Bundesanstalt für Arbeitsschutz und Arbeitsmedizin (Hrsg.), Aktuelles zum Gefahrstoffrecht—September 2015 (2015)
Jacob, H.-J.: Pulververarbeitung unter Staub- und Gas-Ex-Bedingungen. In: Technische Sicherheit Bd. 9 (2019) Nr. 07/08 - Juli/August. Special: Explosionsschutz, Ballrechten-Dottingen (2019)
SuvaArbeitssicherhei (Hrsg.): Explosionsschutz – Grundsätze, Mindestvorschriften, Zonen, Bereich Chemie, 5., überarbeitete Auflage – Juli 2008 (2008)
Vetter, G.: Handbuch Dosieren. Vulkan-Verlag, Essen (1994)
Schopphoven, T.: Experimentelle und modelltheoretische Untersuchungen zum Extremen Hochgeschwindigkeits-Laserauftragschweißen, Dissertation, FRAUNHOFER VERLAG (2019)
Zeppelin Systems GmbH (Hrsg.): DER WEG IST UNSER ZIEL, Innovative Fördersysteme, Werbebroschüre. https://www.zeppelin.com/content/dam/zeppelin/anlagenbau/footer/downloads/04_prozessl%C3%B6sungen/Zeppelin-Systems-06-F%C3%B6rdertechnik.pdf, Date of last access 27 Sept 2021
Lammers, M., Biester, K., Schwarz, N., Hermsdorf, J., Kaierle, S., Ahlers, H.: Automatic changing of weld deposit for additive manufacturing of hybrid metal-glass components using direct laser deposition, Lasers in Manufacturing Conference 2011, München, Wissenschaftliche Gesellschaft Lasertechnik e. V. (2021)
Infineon Technologies AG (Hrsg.): Grundlagen der Robotik, Website: https://www.infineon.com/cms/de/discoveries/grundlagen-robotics/. Date of last access 27 Sept 2021
VDI 2860: Assembly and handling; handling functions, handling units; terminology, definitions and symbols, VDI-Gesellschaft Produktion und Logistik (1990)
Picum, M.T., GmbH (Hrsg.): Maschinensysteme für die mobile Präzisionsbearbeitung, Website: https://picum-mt.com/de/home-de/, Date of last access 27Sept 2021
Jung, S., Backes, G.: Koaxiale Pulverdüsen Präzise und effizient, Fraunhofer ILT (Hrsg.). https://www.ilt.fraunhofer.de/content/dam/ilt/de/documents/Leistungsangebote/lasermaterialbearbeitung/HZ_Koaxiale%20Pulverdu%CC%88sen_de.pdf. Date of last access 30 Sept 2021
Hillig, H.: Modulares Pulverdüsensystem COAXn, Fraunhofer IWS (Hrsg.). https://www.iws.fraunhofer.de/de/technologiefelder/thermische_oberflaechentechnik/auftragschweissen/systemtechnik/COAXn.html. Date of last access 30Sept 2021
Dickler, H.,Tharmakulasingam, S.: HIGHNO 4.0 – KOAXIALE PULVERZUFUHRDÜSE, HD Sonderoptiken für die Lasertechnik (Hrsg.). http://www.hd-sonderoptiken.de/de/documents/Produktblatt%20-%20HighNo%204.0.pdf. Date of last access 30 Sept 2021
Precitec GmbH & Co. KG (Hrsg.): Laserauftragschweißen mit Metallpulver – Fokussieroptiken YC30|YC52, https://www.precitec.com/de/laserschweissen/produkte/bearbeitungskoepfe/yc30/. Date of last access 30 Sept 2021
Lammers, M., Budde, L., Barroi, A., Hermsdorf, J., Kaierle, S.: Entwicklung von Laser-Systemkomponenten optimiert für die additive Fertigung mittels SLM. In: Konstruktion für die Additive Fertigung 2018, ISBN: 978-3-662-59057-7 (Springer Berlin Heidelberg, 2019)
Acknowledgements
This work was carried out within the framework of the EFRE—NBank funded project “GROTESK—Generative Manufacturing of Optical, Thermal and Structural Components” by the subproject mGROTESK (ZW6-85017913).
![figure a](http://media.springernature.com/lw685/springer-static/image/chp%3A10.1007%2F978-3-030-96501-3_6/MediaObjects/517577_1_En_6_Figa_HTML.png)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Lammers, M., Barroi, A., Hermsdorf, J., Kaierle, S., Ahlers, H. (2022). Development of System Technology for Coaxial Laser Material Deposition of Optical, Thermal and Structural Components. In: Lachmayer, R., Kracht, D., Wesling, V., Ahlers, H. (eds) Generative Manufacturing of Optical, Thermal and Structural Components (GROTESK). Springer, Cham. https://doi.org/10.1007/978-3-030-96501-3_6
Download citation
DOI: https://doi.org/10.1007/978-3-030-96501-3_6
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-96500-6
Online ISBN: 978-3-030-96501-3
eBook Packages: EngineeringEngineering (R0)