Abstract
Development of a wireless network control system (WNCS), applied to the speed control of a DC motor through a PID algorithm that is configured with the programming tool for IoT, such as NODE-RED which allows connecting various devices in a wireless network, the mechanism is implemented by an embedded card ESP8266 which is interconnected with electronic modules, such as sensors, actuators. The data of the speed of the mechanism can be observed in real time, for which augmented reality (AR) was used by identifying a previously established scene or pattern, digitally superimposes information on the image for this application can be viewed from a mobile device, For communication between devices The MQTT (Message Queing Telemetry Transport) protocol was used to the network broker, where through a dashboard the speed values can be confirmed. Virtual Reality (VR) was used for the creation of a graphic interface that allows a simulation of a 3D scene made with Matlab programming tools, allowing to develop the modeling of the system and thus observe the dynamic behavior of the system in an ideal way to compare it with the real world.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Syafiq, M., Mohd, A.: EasyChair Preprint Control System Development for Hybrid Generator Project Control System Development for Hybrid Generator Project (2019)
Pillajo, C., Hincapié, R.: Wireless Network Control Systems De la teoría a la práctica. Quito-Ecuador (2018)
Tabaa, M., Chouri, B., Saadaoui, S., Alami, K.: Industrial Communication based on Modbus and Node-RED. Procedia Comput. Sci. 130, 583–588 (2018). https://doi.org/10.1016/j.procs.2018.04.107
Rattanapoka, C., Chanthakit, S., Chimchai, A., Sookkeaw, A.: An MQTTbased IoT cloud platform with flow design by Node-RED. In: RI2C 2019 - 2019 Res. Invent. Innov. Congr. (2019). https://doi.org/10.1109/RI2C48728.2019.8999942
Chanthakit, S.: MQTT based air quality monitoring system using NodeMCU and Node-RED. pp. 3–7 (2018)
Martínez, J.: Desarrollo de un videojuego de realidad aumentada en unity. pp. 1–161 (2019)
Ritchie, P.: Practical Microsoft Visual Studio 2015. In: Pract. Microsoft Vis. Stud. 2015, pp. 1–25 (2016). https://doi.org/10.1007/978-1-4842-2313-0
MATLAB: versión 7.10.0 (R2018b). MathWorks Inc., Natick, Massachusetts (2018)
Paganelli, M., Sottovia, P., Guerra, F., Velegrakis, Y.: TuneR. In: 2018 Int. Conf. Power Energy, Environ. Intell. Control, pp. 2945–2948 (2019). https://doi.org/10.1145/3357384.3357854
Sandino, L.A., Bejar, M., Ollero, A.: Entorno avanzado de simulación y experimentación en tiempo real. In: Actas las XXXI Jornadas Automática no. June 2015, pp. 1–8 (2010). https://doi.org/10.13140/RG.2.1.3452.7204
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Pillajo, B., Bautista, R., Pillajo, C. (2022). Industrial Digitalization for Controlling a Dc Motor Through WNCS. In: Rocha, Á., Ferrás, C., Méndez Porras, A., Jimenez Delgado, E. (eds) Information Technology and Systems. ICITS 2022. Lecture Notes in Networks and Systems, vol 414. Springer, Cham. https://doi.org/10.1007/978-3-030-96293-7_7
Download citation
DOI: https://doi.org/10.1007/978-3-030-96293-7_7
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-96292-0
Online ISBN: 978-3-030-96293-7
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)