Abstract
The actual problem of creating rational methods for processing industrial waste includes the problem of mixing granular raw materials and can be successfully solved within the framework of a cyber-physical system. In this work, an analysis of the efficiency of the rotary method of obtaining a mixture from the indicated components is carried out using two rows of elastic rectangular blades fixed in one direction tangentially to the outer cylindrical surface of the mixing drum. The assessment of this efficiency was carried out taking into account the degree of overlapping of the intervals of variation of the peak values for the characteristic geometric parameters of the mixing process of the tested working materials. The data obtained using the energy method on the laws of particle distribution in the flows formed to connect the sets of input and output parameters of the technological process at the stage of preparing the cyber-physical platform.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Yan, J., Bäverman, C., Moreno, L., Neretnieks, I.: The long-term acid neutralizing capacity of steel slag. Stud. Environ. Sci. 71, 631–640 (1997). https://doi.org/10.1016/S0166-1116(97)80246-4
Kapranova, A.B., Bakin, M.N., Verloka, I.I.: Simulation of the quality criterion of a mixture in a drum-belt apparatus. Chem. Pet. Eng. 54(5), 287–297 (2018). https://doi.org/10.1007/s10556-018-0477-0
Kapranova, A.B., Verloka, I.I., Yakovlev, P.A., Bahaeva, D.D.: Investigation of the quality of the mixture at the first stage of operation of a gravitational apparatus. Russ. J. Gen. Chem. 90(6), 1178–1179 (2020). https://doi.org/10.1134/S1070363220060341
Kapranova, A.B., Verloka, I.I., Bahaeva, D.D.: About preparation of the analytical platform for creation of a cyber-physical system of industrial mixture of loose components. In: Cyber-Physical Systems: Advances in Design & Modelling. Studies in Systems, Decision, and Control, vol. 259, pp. 81–91 (2020). https://doi.org/10.1007/978-3-030-32579-4_7
Zhang, H. (ed.): Building Materials in Civil Engineering, Series: Woodhead Publishing Series in Civil and Structural Engineering Published, 1st ed., p. 440. Elsevier (9th May 2011)
Shaul, S., Rabinovich, E., Kalman, H.: Generalized flow regime diagram of fluidized beds based on the height to bed diameter ratio. Powder Technol. 228, 264–271 (2012). https://doi.org/10.1016/j.powtec.2012.05.029
Bauman, I., Curic, D., Boban, M.: Mixing of solids in different mixing devices. Sadhana 33(6), 721–731 (2008). https://doi.org/10.1007/s12046-008-0030-5(Springer)
Makarov, Y.I.: Devices for Mixing Bulk Materials. 216 p. Mechanical Engineering, Moscow (1973)
Kapranova, A.B., Verloka, I.I., Bahaeva, D.D., Tarshis, M.Yu., Cherpitsky, S.N.: To the calculation of the average value of the volume fraction of the key bulk component at the intermediate stage of mixing with an inclined bump. Front. Energy Res. Process Energy Syst. 8, 1–11 (07 August 2020). Article 135. https://doi.org/10.3389/fenrg.2020.00135
Zaselskiy, V., Shved, S., Shepelenk,o M., Suslo, N.: Modeling the horizontal movement of bulk material in the system “conveyor–rotary mixer”. In: E3S Web Conference, vol. 166, p. 06008 (2020). https://doi.org/10.1051/e3sconf/202016606008
Zeren, Z., Neau, H., Fede, P., Simonin, O., Bernard, D., Williams, S.: Numerical study of solid particle axial mixing in a fixed cylindrical drum with rotating paddles: modeling and simulation of reacting multiphase flows at industrial scales. In: 2012 AIChE Annual Meeting, (28 October 2012–02 November 2012) (Pittsburgh, United States). https://www.researchgate.net/publication/282212762_Numerical_study_of_solid_particle_axial_mixing_in_a_fixed_cylindrical_drum_with_rotating_paddles
Kapranova, A., Bahaeva, D., Stenko, D., Vatagin, A., Lebedev, A., Lichak, D.: Distribution of the components of the building mixture in the presence of secondary raw materials during rotary mixing. In: E3s Web of Conference, vol. 220, p. 01060 (16 December 2020). https://doi.org/10.1051/e3sconf/202022001060
Verloka, I., Kapranova, A., Tarshis, M., Cherpitsky, S.: Stochastic modeling of bulk components batch mixing process in gravity apparatus, Int. J. Mech. Eng. Technol. 9(2), 438–444 (2018). Article ID: IJMET_09_02_045. http://www.iaeme.com/IJMET/issues.asp?JType=IJMET&VType=9&IType=2
Zhang, L., Nie, G.Y.: ODS analysis on the rack of batching system mixer. Appl. Mech. Mater. 437, 257–260 (2013). 0.4028/www.scientific.net/AMM.437.257
Kafarov, V.V., Dorokhov, I.N., Arutyunov, S.Y.: System Analysis of Processes of Chemical Engineering, 440 p. Science, Moscow (1985)
Bogomolov, B., Boldyrev, V., Zubarev, A., Meshalkin, V., Men’shikov, V.: Intelligent logical information algorithm for choosing energy- and resource-efficient chemical technologies. Theor. Found. Chem. Eng. 53(5), 709–718 (2019). https://doi.org/10.1134/S0040579519050270
Klimontovich, Y.L.: Turbulent Motion and the Structure of Chaos: A New Approach to the Statistical Theory of Open Systems, 328 p. LENAND, Moscow (2014)
Klimontovich, Y.L.: Turbulent motion and the structure of chaos. Ser. Fund. Theor. Phys. 42, p. 401 (1991). https://doi.org/10.1007/978-94-011-3426-2
Lebedev, A.E., Vatagin, A.A., Borisovsky, M.E., Romanova, M.N., Badaeva, N.V., Sheronina, I.S.: Utility Model Patent: 2624698 Russian Federation, B01F3/18. Unit for mixing and compaction of bulk materials (2017)
Bharucha-Reid, A.T.: Elements of the Theory of Markov Processes and Their Applications. McGraw-Hill, New York (1960)
Röpke, G.: Statistical Mechanics for Non-Equilibrium. German Publishing House of Sciences, Berlin (1987)
Geng, T., Sau, L.L., Xiaochuan, Ya. Moo, S.H.: A dimensionless analysis of residence time distributions for continuous powder mixing. Powder Technol. 315, 332–338 (2017). https://doi.org/10.1016/j.powtec.2017.04.007
Johnson, N., Kendal, L.M., Stuar, T.A.: J. R. Stat. Soc. Ser. D (The Statistician) 12(2), 138 (1962)
Ghaderi, A.: Continuous mixing of particulate materials. In: Proceedings of the 4th International Conference for Conveying and Handling of particulate solids, At Budapest, Hungary, vol. 2 (January 2003). https://doi.org/10.13140/2.1.3487.6801
Leonchik, B.I., Mayakin, V.P.: Measurements in Dispersed Flows. Energy, Moscow, 248 p. (1985)
Dehling, H.G., Gottschalk, T., Hoffmann, A.C.: Stochastic Modeling in Process Technology, 279 p. Elsevier Science, London (2007)
Mizonov, V., Balagurov, I., Berthiaux, H., Gatumel, C.: Gatumel Markov chain model of mixing kinetics for a ternary mixture of dissimilar particulate solids. Particuology 31, 80–86 (2016). https://doi.org/10.1016/j.partic.2016.05.006
Akhmadiev, F.G., Gizzyatov, R.F.: Modeling of separation of granular materials on multiple-deck classifiers using the theory of stochastic processes. Theor. Found. Chem. Eng. 52(3), 360–370 (2018)
Zhuang, Y., Chen, X., Liu, D.: Stochastic bubble developing model combined with Markov process of particles for bubbling fluidized beds. Chem. Eng. J. 291, 206–214 (2016) https://doi.org/10.1016/j.cej.2016.01.095
Zhukov, V.P., Belyakov, A.N.: Simulation of combined heterogeneous processes based on discrete models of the Boltzmann equation. Theor. Found. Chem. Eng. 51(1), 88–93 (2017). https://doi.org/10.1134/S0040579517010158 (Springer)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this chapter
Cite this chapter
Kapranova, A.B., Stenko, D.V., Bahaeva, D.D., Vatagin, A.A., Lebedev, A.E. (2022). Analysis of the Efficiency of the Rotary Method for Producing a Mixture of Granular Raw Materials in the Preparation of a Cyber-Physical Platform. In: Kravets, A.G., Bolshakov, A.A., Shcherbakov, M. (eds) Cyber-Physical Systems: Modelling and Industrial Application. Studies in Systems, Decision and Control, vol 418. Springer, Cham. https://doi.org/10.1007/978-3-030-95120-7_25
Download citation
DOI: https://doi.org/10.1007/978-3-030-95120-7_25
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-95119-1
Online ISBN: 978-3-030-95120-7
eBook Packages: EngineeringEngineering (R0)