Abstract
The paper proposes an approach to creating an automation system for controlling and monitoring the climatic conditions of a production facility, which is characterized by the use of available microprocessors and mass-produced components. The developed system, including all its software and hardware components, should be flexible in terms of construction, use and readjustment, should be close to analogs existing on the market, such as climate control elements for building automation systems, but have greater functionality and lower cost. The development of such a solution will increase their availability and flexibility by expanding the technology stack applicable to solving such problems.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Martinov, G.M., Kozak, N.V., Nikishechkin, P.A.: Approach to solving the task of backup on machine tools with CNC. Russ. Eng. Res. 40, 1024–1029 (2020). https://doi.org/10.3103/S1068798X20120096
Kovalev, I., Kvashnin, D., Chervonnova, N., Nikich, A.: Application of agile methodology at industrial manufacturing as part of the Industry 4.0. In: ICMTMTE 2020. IOP Conference Series: Materials Science and Engineering, vol. 971, p. 052034 (2020). https://doi.org/10.1088/1757-899X/971/5/052034
Nezhmetdinov, R., Kovalev, I., Chervonnova, N., Nezhmetdinova, R., Khoury, A.A.l.: An approach to the development of logical control systems for technological equipment in the concept of Industry 4.0. In: ICMTMTE 2020, MATEC Web of Conference, vol. 329 p. 03044 (2020). https://doi.org/10.1051/matecconf/202032903044
Martinova, L.I., Kozak, N.V., Kovalev, I.A., Ljubimov, A.B.: Creation of CNC system’s components for monitoring machine tool health. Int. J. Adv. Manuf. Technol. 117(7–8), 2341–2348 (2021). https://doi.org/10.1007/s00170-021-07107-1
Kovalev, I., Issa, A., Nikishechkin, P., Chervonnova, N., Petrov, A.: Development of a data collection system for a CNC system using cloud FRED technology and OPC UA specification. In: ICMTMTE 2020, MATEC Web of Conference, vol. 329 p. 03043 (2020). https://doi.org/10.1051/matecconf/202032903043
Tikhonov, A.F., Demidov, S.L., Smelyakov, A.L.: Automation of engineering systems to ensure optimal parameters of the microclimate of a manufacturing enterprise. Mech. Constr. 12, 56–58 (2013)
Nikishechkin, P.A., Chervonnova, N.Yu., Nikich, A.N.: Approach to development of specialized terminals for equipment control on the basis of shared memory mechanism. In: Radionov, A.A., Karandaev, A.S. (eds.) RusAutoCon 2019. LNEE, vol. 641, pp. 181–188. Springer, Cham (2020). https://doi.org/10.1007/978-3-030-39225-3_20
Martinov, G.M., Kovalev, I.A., Chervonnova, N.Y.: Development of a platform for collecting information on the operation of technological equipment with the use of Industrial Internet of Things. In: IOP Conference Series: Materials Science and Engineering, vol. 709, no. 4 (2020). https://doi.org/10.1088/1757-899X/709/4/044063
Martinova, L.I., Pushkov, R.L., Fokin, N.N.: Development of standardized tools for shopfloor programming of turning and turn-milling machines. In: IOP Conference Series: Materials Science and Engineering, vol. 709, no. 4 (2020). https://doi.org/10.1088/1757-899X/709/4/044064
Nikishechkin, P.A., Chervonnova, N.Y., Nikich, A.N.: An approach of developing solution for monitoring the status and parameters of technological equipment for the implementation of Industry 4.0. In: IOP Conference Series: Materials Science and Engineering, vol. 709, no 4 (2020). https://doi.org/10.1088/1757-899X/709/4/044065
Martinov, G., Nikishechkin, P., Al Khoury, A., Issa, A.: Control and remote monitoring of the vertical machining center by using the OPC UA protocol. In: IOP Conference Series: Materials Science and Engineering, vol. 919, p. 032030, pp. 1–8 (2020). https://doi.org/10.1088/1757-899X/919/3/032030
Martinova, L., Obukhov, A., Sokolov, S.: Practical aspects of ensuring accuracy of machining on CNC machine tools within framework of “smart manufacturing”. In: 2020 International Russian Automation Conference, pp. 898–902 (2020). https://doi.org/10.1109/RusAutoCon49822.2020.9208079
Martinov, G., Pushkov, R., Martinova, L., Kozak, N., Evstafieva, S.: Approach to development of HMI screens for CNC with dynamic kinematics. In: ICMTMTE 2020, MATEC Web of Conference, vol. 329, p. 03026, pp. 1–6 (2020). https://doi.org/10.1051/matecconf/202032903026
Kovalev, I., Nezhmetdinov, R., Nikishechkin, P.: Approach to assessing the possibility of functioning of CNC and PAC systems on various software and hardware platforms. In: International Multi-Conference on Industrial Engineering and Modern Technologies, pp. 1–5 (2019). https://doi.org/10.1109/FarEastCon.2019.8933999
Kovalev, I.A., Babin, M., Nikishechkin, P.: Development of a method for the determination and registration of unauthorized data transmission channels at industrial manufactories. In: MATEC Web of Conference, vol. 298 (2019). https://doi.org/10.1051/matecconf/201929800110
Chekryzhov, V., Kovalev, I.A., Grigoriev, A.S.: An approach to technological equipment performance information visualization system construction using augmented reality technology. In: International Conference on Modern Trends in Manufacturing Technologies and Equipment, pp. 1–7 (2018). https://doi.org/10.1051/matecconf/201822402093
Grigoriev, S., Martinov, G.: An approach to creation of terminal clients in CNC system. In: 3rd Russian-Pacific Conference on Computer Technology and Applications, pp. 1–4 (2018). https://doi.org/10.1109/RPC.2018.8482153
Martinova, L.I., Fokin, N.N.: An approach to creation of a unified system of programming CNC machines in the dialog mode. In: International Conference on Modern Trends in Manufacturing Technologies and Equipment, vol. 224, pp. 1–5 (2018). https://doi.org/10.1051/matecconf/201822401101
Kovalev, I., Nezhmetdinov, R., Kvashnin, D.: Big data analytics of the technological equipment based on Data Lake architecture. In: MATEC Web of Conference, vol. 298 (2019). https://doi.org/10.1051/matecconf/201929800079
Martinov, G.M., Nikishechkin, P.A., Grigoriev, A.S., Chervonnova, N.: Organizing interaction of basic components in the CNC system AxiOMA control for integrating new technologies and solutions. Autom. Remote Control 80(3), 584–591 (2019). https://doi.org/10.1134/S0005117919030159
Martinov, G.M., Al Khoury, A., Issa, A.: An approach of developing low cost ARM based CNC systems by controlling CAN drives. In: International Conference on Modern Trends in Manufacturing Technologies and Equipment, vol. 224, pp. 1–6 (2018). https://doi.org/10.1051/matecconf/201822401020
Acknowledgments
This research was supported by Fund for Assistance to Small Innovative Enterprises in Science and Technology (agreement 16266ГУ/2021 from 18 May 2021).
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Nezmetdinov, R., Melikov, P., Utarbaev, R. (2022). Development of the Industrial Room Automation System on the Basis of a Single Computer. In: Radionov, A.A., Gasiyarov, V.R. (eds) Advances in Automation III. RusAutoCon 2021. Lecture Notes in Electrical Engineering, vol 857. Springer, Cham. https://doi.org/10.1007/978-3-030-94202-1_9
Download citation
DOI: https://doi.org/10.1007/978-3-030-94202-1_9
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-94201-4
Online ISBN: 978-3-030-94202-1
eBook Packages: EngineeringEngineering (R0)