Abstract
Concrete slabs are subjected to compressive forces due to prestressing or restraint conditions. Using prestressed concrete slabs for long spans is a top choice in many applications, particularly lightweight ones. However, the number of studies tackling the punching shear design of lightweight concrete slabs subjected to compressive forces is minimal. The purpose of this investigation is to assess the punching shear design of lightweight and normal-weight concrete slabs. The available punching shear testing for lightweight and normal-weight concrete slabs is compiled. The punching shear strength is calculated using selected design codes compared with the experimentally measured strength. Concluded remarks were outlined and discussed.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
EC2: EN 1992-1-1:2004: Eurocode 2: Design of concrete structures - Part 1–1: General rules and rules for buildings. Incl. Corrigendum 1: EN 1992-1-1:2004/AC:2008, incl. Corrigendum 2: EN 1992-1-1:2004/AC:2010, incl. Amendment 1: EN 1992-1- 1:2004/A1:2014 (2004)
ACI: Committee 318. Building Code Requirements for Structural Concrete (ACI 318–19) and Commentary on Building Code Requirements. Farmington Hills (MI): American Concrete Institute; 2019 (2019)
ECOP: Egyptian Code for Design and Construction of Concrete Structures, Ministry of housing and infrastructures, National research center for housing and building, pp. 203–300 (2018)
MC: Fib model code for concrete structures 2010. Ernst & Sohn (2013)
Deifalla, A.: Design of lightweight concrete slabs under two-way shear without shear reinforcements: a comparative study and a new model. Eng. Struct. 222(2020), 111076 (2020). https://doi.org/10.1016/j.engstruct.2020.111076
Deifalla, A.: A strength and deformation model for prestressed lightweight concrete slabs under two-way shear. Adv. Struct. Eng. 1–12 (2021). https://doi.org/10.1177/13694332211020408
Deifalla, A.: A mechanical model for concrete slabs subjected to combined punching shear and in-plane tensile forces. Eng. Struct. 231(2021), 111787 (2021)
Deifalla, A.: Strength and ductility of lightweight reinforced concrete slabs under punching shear. Structures 27, 2329–2345 (2020). https://doi.org/10.1016/j.istruc.2020.08.002
Deifalla, A.: Torsion design of lightweight concrete beams without or with fibers: a comparative study and a refined cracking torque formula. Structures 28, 786–802 (2020). https://doi.org/10.1016/j.istruc.2020.09.004
Deifalla, A., Awad, A., AbdElrahman, A.A., Seleem, H.: Investigating the behavior of lightweight foamed concrete t-beams under torsion, shear, and flexure. Eng. Struct. 219, 110741 (2020). https://doi.org/10.1016/j.engstruct.2020.110741
Deifalla, A., Awad, A., Seleem, H., AbdElrahman, A.: Experimental and numerical investigation of the behavior of LWFC L-girders under combined torsion. Structures 26, 362–77 (2020). https://doi.org/10.1016/j.istruc.2020.03.070
Deifalla, A.: Torsional behavior of rectangular and flanged concrete beams with F.R.P. J. Struct. Eng. ASCE. In press since March 2015, STENG-3340R5 (2015). https://doi.org/10.1061/(ASCE)ST.1943-541X.0001322
Saleh, A., Fathy, A., Deifalla, A., Nasser, M.: Performance of steel fiber reinforced concrete corbels. Int. Res. J. Innovations Eng. Technol. (IRJIET) 3(2), 22–27 (2019)
Deifalla, A.: Refining the torsion design of fibered concrete beams reinforced with F.R.P. using multi-variable non-linear regression analysis for experimental results. Eng. Struct. 226 (2020). https://doi.org/10.1016/j.engstruct.2020.111394
Deifalla, A., Ghobarah, A.: behavior and analysis of inverted T-shaped RC beams under shear and torsion. Eng. Struct. 62, 776–786 (2014)
Deifalla, A., Awad, A., El-Garhy, M.: Effectiveness of externally bonded CFRP strips for strengthening flanged beams under torsion: an experimental study. Eng. Struct. 56, 2065–2075 (2013)
Deifalla, A., Ghobarah, A.: Full torsional behavior of RC beams wrapped with F.R.P.: analytical model. ACSE, Compos. Constr. 14(3), 289–300 (2010)
Deifalla, A., Ghobarah, A.: Strengthening RC t-beams subjected to combined torsion and shear using F.R.P. fabrics - experimental study. ASCE, Compos. Constr. 14(3), 301–311 (2010)
Deifalla, A., Hamed, M., Saleh, A., Ali, T.: Exploring GFRP bars as reinforcement for rectangular and L-shaped beams subjected to significant torsion: an experimental study. Eng. Struct. 59, 776–786 (2014)
Deifalla, A., Khali M.S., Abdelrahman, A.: Simplified model for the torsional strength of concrete beams with GFRP stirrups. Compos. Constr. ASCE, 19(1), 04014032 (2015). http://dx.doi.org/10.1061/(ASCE)CC.1943-5614.0000498
ElMeligy, O., El-Nemr, A.M., Deifalla, A.: Re-evaluating the modified shear provision of CAN/CSA S806–12 for concrete beams reinforced with F.R.P. stirrups. A.E.I. (2017). https://doi.org/10.1061/9780784480502.027
Hassan, M.M., Deifalla, A.: Evaluating the new CAN/CSA-S806-12 torsion provisions for concrete beams with F.R.P. reinforcements. Mater. Struct. https://doi.org/10.1617/s11527-015-0680-9. Accessed 18 July 2015
Chakraborty, D., Elhegazy, H., Elzarka, H., Gutierrez, L.: A novel construction cost prediction model using hybrid natural and light gradient boosting. Adv. Eng. Inf., 46 (2020). https://doi.org/10.1016/j.aei.2020.101201
Elhegazy, H.: State-of-the-art review on benefits of applying value engineering for multi-story buildings. Intell. Build. Int. (2021). https://doi.org/10.1080/17508975.2020.1806019
Elhegazy, H., Badra, N., Aboul Haggag, S., Abdel Rashid, I.: Implementation of the neural networks for improving the project’s performance of steel structures projects. J. Ind. Integr. Manage. (2022). https://doi.org/10.1142/S2424862221500251
Zhong, S., Elhegazy, H., Elzarka, H.: Key factors affecting the decision-making process for buildings projects in Egypt. Ain Shams Eng. J. (2021). https://doi.org/10.1016/j.asej.2021.09.024
Acknowledgments
The author wishes to extend gratitude to the Future University In Egypt for their continuous support and encouragement.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Deifalla, A. (2022). Evaluation for the Punching Shear Design of Concrete Slabs Subjected to Compressive Forces. In: Saidi, R., El Bhiri, B., Maleh, Y., Mosallam, A., Essaaidi, M. (eds) Advanced Technologies for Humanity. ICATH 2021. Lecture Notes on Data Engineering and Communications Technologies, vol 110. Springer, Cham. https://doi.org/10.1007/978-3-030-94188-8_42
Download citation
DOI: https://doi.org/10.1007/978-3-030-94188-8_42
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-94187-1
Online ISBN: 978-3-030-94188-8
eBook Packages: EngineeringEngineering (R0)