Abstract
When an electronic or electrical device like cellular phones, computers, printers, washing machines, refrigerators, etc. reaches the end of its service life, its disposal results in the creation of electronic waste (e-waste). In 2019, about 53.6 Mt. of e-waste was generated worldwide, and it is estimated to reach 74.7 Mt. by 2030. The rapid up-gradation in science and technology, short product life cycles, and very few repair services contribute to the generation of the copious amount of e-waste. The disposal of this copious amount of e-waste is huge concerning matter regarding the environment. In addition, the presence of noxious substances such as lead, cadmium, beryllium, mercury, dioxins, etc. makes it challenging to dispose of them. The present research work presents a comprehensive review of the previous studies and examinations carried out to find an effective way to utilize e-waste in construction practices. The study finds that recycling e-waste in construction can be a suitable alternative to minimize e-waste while offering new sustainable waste management strategies.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Alagusankareswari K, Kumar SS, Vignesh KB, Niyas KAH (2016) An experimental study on e-waste concrete. Indian J Sci Tech 9(2). https://doi.org/10.17485/ijst/2016/v9i2/86345
Ali K, Qureshi MI, Saleem S, Khan SU (2021) Effect of waste electronic plastic and silica fume on mechanical properties and thermal performance of concrete. Const Build Mat 285:P122952. https://doi.org/10.1016/j.conbuildmat.2021.122952
Ban BC, Song JY, Lim JY, Wang SK, An KG, Kim DS (2005) Studies on the reuse of waste printed circuit board as an additive for cement mortar. J Environ Sci Health 40(3):645–656. https://doi.org/10.1081/ESE-200046618
Borthakur A, Singh P (2020) Mapping the emergence of research activities on E-waste: a scientometric analysis and an in-depth review. Handbook of Electronic Waste Management, p 191–206. https://doi.org/10.1016/B978-0-12-817030-4.00017-6
Caravanos J, Clark E, Fuller R, Lambertson C (2011) Assessing worker and environmental chemical exposure risks at an e-waste recycling and disposal site in Accra, Ghana. J Health Poll 1(1):16–25. https://doi.org/10.5696/jhp.v1i1.22
Cayumil R, Khanna R, Rajarao R, Ikram-ul-Haq M, Mukherjee PS, Sahajwalla V (2016) Environmental impact of processing electronic waste–key issues and challenges. E-waste in transition—from pollution to resource, InTech, p 9-35
Chunchu BRK, Putta J (2019) Effect of recycled plastic granules as a partial substitute for natural resource sand on the durability of SCC. Resou 8(3):133. https://doi.org/10.3390/resources8030133
Cruz-Sotelo SE, Ojeda-Benítez S, Jauregui Sesma J, Velázquez-Victorica KI, Santillán-Soto N, García-Cueto OR, Alcantara Concepcion V, Alcántara C (2017) E-waste supply chain in Mexico: Challenges and opportunities for sustainable management. Sust 9(4):503. https://doi.org/10.3390/su9040503
Evram A, Akçaoğlu T, Ramyar K, Çubukçuoğlu B (2020) Effects of waste electronic plastic and marble dust on hardened properties of high strength concrete. Const Build Mat 263:P120928. https://doi.org/10.1016/j.conbuildmat.2020.120928
Forti V, Balde CP, Kuehr R, Bel G (2020) The Global E-waste Monitor 2020: Quantities, flows and the circular economy potential
Gollakota AR, Gautam S, Shu CM (2020) Inconsistencies of e-waste management in developing nations–Facts and plausible solutions. J Environ Manag 261:P110234. https://doi.org/10.1016/j.jenvman.2020.110234
Hamsavathi K, Prakash KS, Kavimani V (2020) Green high strength concrete containing recycled Cathode Ray Tube Panel Plastics (E-waste) as coarse aggregate in concrete beams for structural applications. J Build Engg 30:P101192. https://doi.org/10.1016/j.jobe.2020.101192
Huang J, Nkrumah PN, Anim DO, Mensah E (2014) E-waste disposal effects on the aquatic environment: Accra, Ghana. Reviews of environmental contamination and toxicology, p 19-34. https://doi.org/10.1007/978-3-319-03777-6_2
Hui Z, Poon CS, Ling TC (2013) Properties of mortar prepared with recycled cathode ray tube funnel glass sand at different mineral admixture. Const Build Mat 40:951-960. https://doi.org/10.1016/j.conbuildmat.2012.11.102
Islam MT, Huda N (2020) Reshaping WEEE management in Australia: An investigation on the untapped WEEE products. J Clean Prod 250:P119496. https://doi.org/10.1016/j.jclepro.2019.119496
Kakria K, Thirumalini S, Secco M, Priya TS (2020) A novel approach for the development of sustainable hybridized geopolymer mortar from waste printed circuit boards. Resou Conser Recy 163:P105066. https://doi.org/10.1016/j.resconrec.2020.105066
Kalpana M, Vijayan DS, Benin SR (2020) Performance study about ductility behaviour in electronic waste concrete. Materials Today: Proceedings 33:1015–1020. https://doi.org/10.1016/j.matpr.2020.07.049
Kang HY, Schoenung JM (2005) Electronic waste recycling: A review of US infrastructure and technology options. Resou Conser Recy 45(4):368–400. https://doi.org/10.1016/j.resconrec.2005.06.001
Kumar A, Holuszko M, Espinosa DCR (2017) E-waste: An overview on generation, collection, legislation and recycling practices. Resou Conser Recy 122:32–42. https://doi.org/10.1016/j.resconrec.2017.01.018
Kumar KS, Baskar K (2015) Recycling of E-plastic waste as a construction material in developing countries. J Mat Cycles Waste Manag 17(4):718-724. https://doi.org/10.1007/s10163-014-0303-5
Kurup AR, Kumar KS (2017) Novel fibrous concrete mixture made from recycled PVC fibers from electronic waste. J Haz Toxic Radio Waste 21(2):04016020. https://doi.org/10.1061/(asce)hz.2153-5515.0000338
Lakshmi R, Nagan S (2011) Investigations on durability characteristics of E-plastic waste incorporated concrete. Asian J Civil Engg (Build Hous) 12(6):773–787.
Ling TC, Poon CS (2011) Utilization of recycled glass derived from cathode ray tube glass as fine aggregate in cement mortar. J Haz Mat 192(2):451–456. https://doi.org/10.1016/j.jhazmat.2011.05.019
Ling TC, Poon CS, Lam WS, Chan TP, Fung KKL (2012) Utilization of recycled cathode ray tubes glass in cement mortar for X-ray radiation-shielding applications. J Haz Mat 199:321–327. https://doi.org/10.1016/j.jhazmat.2011.11.019
Luhar S, Luhar I (2019) Potential application of E-wastes in construction industry: A review. Const Build Mat 203:222–240. https://doi.org/10.1016/j.conbuildmat.2019.01.080
Luo C, Liu C, Wang Y, Liu X, Li F, Zhang G, Li X (2011) Heavy metal contamination in soils and vegetables near an e-waste processing site, south China. J Haz Mat 186(1):481–490. https://doi.org/10.1016/j.jhazmat.2010.11.024
Makri C, Hahladakis JN, Gidarakos E (2019) Use and assessment of “e-plastics” as recycled aggregates in cement mortar. J Haz Mat 379:P120776. https://doi.org/10.1016/j.jhazmat.2019.120776
Marinello S, Gamberini R (2021) Multi-Criteria Decision Making Approaches Applied to Waste Electrical and Electronic Equipment (WEEE): A Comprehensive Literature Review. Tox 9(1):13. https://doi.org/10.3390/toxics9010013
Merlo A, Lavagna L, Suarez-Riera D, Pavese M (2020) Mechanical properties of mortar containing waste plastic (PVC) as aggregate partial replacement. Case Stud Const Mat 13:Pe00467. https://doi.org/10.1016/j.cscm.2020.e00467
Mmereki D, Li B, Baldwin A, Hong L (2016) The generation, composition, collection, treatment and disposal system, and impact of E-waste. E-waste in Transition-from Pollution to Resource, p 65–93
Needhidasan S, Samuel M, Chidambaram R (2014) Electronic waste–an emerging threat to the environment of urban India. J Environ Health Sci Engg 12(1):1–9. https://doi.org/10.1186/2052-336X-12-36
Ouldkhaoua Y, Benabed B, Abousnina R, Kadri EH (2020) Experimental study on the reuse of cathode ray tubes funnel glass as fine aggregate for developing an ecological self-compacting mortar incorporating metakaolin. J Build Engg 27:P100951. https://doi.org/10.1016/j.jobe.2019.100951
Parajuly K, Kuehr R, Awasthi AK, Fitzpatrick C, Lepawsky J, Smith E, Widmer R, Zeng X (2019) Future e-waste scenarios. StEP (Bonn), UNU ViE-SCYCLE (Bonn) & UNEP IETC (Osaka).
Perkins DN, Drisse MNB, Nxele T, Sly PD (2014). E-waste: a global hazard. Annals Global Health 80(4):286–295. https://doi.org/10.1016/j.aogh.2014.10.001
Pradhan JK, Kumar S (2014) Informal e-waste recycling: environmental risk assessment of heavy metal contamination in Mandoli industrial area, Delhi, India. Environ Sci Poll Research 21(13):7913–7928. https://doi.org/10.1007/s11356-014-2713-2
Sabău M, Vargas JR (2018) Use of e-plastic waste in concrete as a partial replacement of coarse mineral aggregate. Compu Conc 21(4):377–384
Sinha-Khetriwal D, Kraeuchi P, Schwaninger M (2005) A comparison of electronic waste recycling in Switzerland and in India. Environ Impact Assess Review 25(5):492–504. https://doi.org/10.1016/j.eiar.2005.04.006
Someya M, Ohtake M, Kunisue T, Subramanian A, Takahashi S, Chakraborty P, Ramachandran R, Tanabe S (2010) Persistent organic pollutants in breast milk of mothers residing around an open dumping site in Kolkata, India: specific dioxin-like PCB levels and fish as a potential source. Environ Interna 36(1):27–35. https://doi.org/10.1016/j.envint.2009.09.003
Suchorab Z, Franus M, Barnat-Hunek D (2020) Properties of Fibrous Concrete Made with Plastic Optical Fibers from E-Waste. Mat 13(10):2414. https://doi.org/10.3390/ma13102414
Tan MJ, Owh C, Chee PL, Kyaw AKK, Kai D, Loh, XJ (2016) Biodegradable electronics: cornerstone for sustainable electronics and transient applications. J Mat Chem C 4(24):5531–5558. https://doi.org/10.1039/C6TC00678G
Tang X, Shen C, Shi D, Cheema SA, Khan MI, Zhang C, Chen Y (2010) Heavy metal and persistent organic compound contamination in soil from Wenling: an emerging e-waste recycling city in Taizhou area, China. J Haz Mat 173(1-3):653–660. https://doi.org/10.1016/j.jhazmat.2009.08.134
Ullah Z, Qureshi MI, Ahmad A, Khan SU, Javaid MF (2021) An experimental study on the mechanical and durability properties assessment of E-waste concrete. J Build Engg 38:P102177. https://doi.org/10.1016/j.jobe.2021.102177
Wang R, Meyer C (2012) Performance of cement mortar made with recycled high impact polystyrene. Cem Conc Compos 34(9):975–981. https://doi.org/10.1016/j.cemconcomp.2012.06.014
Wang R, Zhang T, Wang P (2012) Waste printed circuit boards nonmetallic powder as admixture in cement mortar. Mat Struc 45(10):1439–1445. https://doi.org/10.1617/s11527-012-9843-0
Widmer R, Oswald-Krapf H, Sinha-Khetriwal D, Schnellmann M, Böni H (2005) Global perspectives on e-waste. Environ Impact Assess Review 25(5):436–458. https://doi.org/10.1016/j.eiar.2005.04.001
Wu Q, Leung JY, Geng X, Chen S, Huang X, Li H, Huang Z, Zhu L, Chen J, Lu Y (2015) Heavy metal contamination of soil and water in the vicinity of an abandoned e-waste recycling site: implications for dissemination of heavy metals. Sci Total Environ 506:217–225. https://doi.org/10.1016/j.scitotenv.2014.10.121
Xiao X, Hu J, Chen P, Chen D, Huang W, Peng PA, Ren M (2014) Spatial and temporal variation, source profile, and formation mechanisms of PCDD/Fs in the atmosphere of an e-waste recycling area, South China. Environ Toxico Chem 33(3):500–507. https://doi.org/10.1002/etc.2460
Zheng J, Chen KH, Yan X, Chen SJ, Hu GC, Peng XW, Yuan JG, Mai BX, Yang ZY (2013) Heavy metals in food, house dust, and water from an e-waste recycling area in South China and the potential risk to human health. Ecotoxico Environ Safety 96:205–212. https://doi.org/10.1016/j.ecoenv.2013.06.017
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Kumar, N., Jaglan, A. (2022). A Review on Utilization of E-Waste in Construction. In: Kanwar, V.S., Sharma, S.K., Prakasam, C. (eds) Proceedings of International Conference on Innovative Technologies for Clean and Sustainable Development (ICITCSD – 2021). Springer, Cham. https://doi.org/10.1007/978-3-030-93936-6_4
Download citation
DOI: https://doi.org/10.1007/978-3-030-93936-6_4
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-93935-9
Online ISBN: 978-3-030-93936-6
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)