Abstract
The article describes two goals of the project. The first is to create a functional simulation of a workplace with a robot, the second goal is to find a suitable smart application for virtual reality using the program RobotStudio.
A manipulation procedure was created for the given workplace layout and manipulated part and subsequently simulated in the RobotStudio program. Subsequently, an experiment with virtual reality is described. We were looking for suitable smart applications of virtual reality and RobotStudio.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Záhonová, V., Králik, M.: Aplikácia špeciálnych matematických metód pri riešení vybraných úloh strojárskeho charakteru. 1. vyd. Bratislava : FX s.r.o., 109 s (2008). ISBN 978-80-89313-38-9
Božek, P.: Špecializované robotické systémy, ÁMOS, Ostrava (2011). ISBN 978-80-904766-3-9
Murray, R.M., Li, Z., Shankar, S.S.: A Mathematical Introduction to Robotic Manipulation. CRC Press, Boca Raton (1994).ISBN 0-8493-7981-4
Angeles, J.: Fundamentals of Robotic Mechanical Systems: Theory, Methods, and Algorithms, 3rd edn. Springer, Montreal (2007).ISBN 0-387-29412-0
Kuna, Peter - Kozík, Tomáš - Kunová, Silvia. Virtuálna realita a vzdelávanie. [online], 2017, [cit: 19.3.2021]. Available: https://repozytorium.ur.edu.pl/bitstream/handle/item/2501/16%20kuna-virtu%c3%a1lna%20realita.pdf?sequence=1&isAllowed=y
Komák, M., Králik, M., Jerz, V.: The generation of robot effector trajectory avoiding obstacles. MM Sci. J. 2018, 2367–2372 (2018). ISSN 1803–1269(P). In database SCOPUS: 2-s2.0-850–48218759
Králik, M., Fiťka, I.: Základy obsluhy priemyselných robotov. 1. vyd. Bratislava Nezisková organizácia Centrum kontinuálneho vzdelávania, 124 s (2020). ISBN 978-80-973700-0-8
Drozd, R.: Project of a robotic workplace for selected applications. Final theses. Thesis supervisor: Assoc. Prof. Marian Králik, Slovak University of Technology in Bratislava, Faculty of Mechanical Engineering, p. 69 (2021)
Acknowledgment
This paper was created with support of the Cultural and Educational Grant Agency of the Ministry of Education, Youth and Sports of the Slovak Republic under the KEGA 027STU-4/2019 contract.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Králik, M., Jerz, V. (2022). Use of Virtual Reality in RobotStudio. In: Durakbasa, N.M., Gençyılmaz, M.G. (eds) Digitizing Production Systems. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-90421-0_22
Download citation
DOI: https://doi.org/10.1007/978-3-030-90421-0_22
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-90420-3
Online ISBN: 978-3-030-90421-0
eBook Packages: EngineeringEngineering (R0)