Abstract
Robotics, also known as automation, have contributed to improving the construction process in all aspects. Over the years, the construction industry has been with an image of hard work of long hours in a hazardous working environment. However, the introduction of automation and robotics technology has brought about a solution to this problem. Robotics and automation often go hand-in-hand.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Ahsan, A., Li, B., & Chen, I. (2018). Pictobot: A cooperative painting robot for interior finishing of Industrial Developments. Journal of IEEE, Robotic and Automation, 25, 82–94.
Akshatha, D., Vimala, M., Sahana, S., & Manjula, M. (2017). Robotics in construction technology. International Journal of Advance Research in Science and Engineering, 6(10), 547–553.
Anudari N. (2019). Robotics in construction of concrete and masonry structures. A thesis submitted in partial fulfilment for the degree of Bachelor in Civil Engineering branch of Building Structures 2019 Czech Technical University in Prague Faculty of Civil Engineering.
Asadi, E., Li, B., & Chen, I. M. (2018). Pictobot: A cooperative painting robot for interior finishing of industrial developments with high walls, Article in IEEE Robotics & Automation Magazine.
Bademosi, F. M., Tayeh, R., & Issa, R. R. (2019). Skills assessment for robotics in construction education. In CEUR Workshop Proceedings, 1–10. Retrieved from http://ceur-ws.org/Vol-2394/paper37.pdf.
Bock, T., Linner, T., & Ikeda, W. (2012). Exoskeleton and humanoid robotic technology in construction and built environment, The Future of Humanoid Robots. Research and Applications, InTech.
Bolivar, N. (2019). Construction robotics. Arcler Press.
Cieslaki, M., Dzialak, P., & Odyjas, P. (2015). Innovative methodology of testing of electrical remotely controlled demolition machines, Book Chapter.
Dakhi, Z., & Lafhaj, Z. (2017). Robotic mechanical design for brick-laying automation. Cogent Engineering, 4, 1–22. https://doi.org/10.1080/23311916.2017.1361600
Delgado, M. D., Oyedele, L., Ajayi, A., Akanbi, L., Akinade, O., Bilal, M., & Owolabi, H. (2019). Robotics and automated system in construction: Understanding industry-specific challenges for adoption. Journal of Building Engineering, 26. https://doi.org/10.1016/j.jobe.2019.100868.
Guglielmo, C., Alfredo, A., Alessandro, B., Marta, N., & Matteo, R. (2018). Robotics in the construction industry: state of the art and future opportunities. In 35th International Symposium on Automation and Robotics in Construction.
Heikkilä, R., & Jaakkola, M. (2002). The efficiency of a 3-D blade control system in the construction of structure layers by road grader-automated design-build of road construction in Finland. In Proceedings of the 19th ISARC 2002, 23–23 Sept. 2002.
Jayaraj, A., & Divakar, H. (2018). Robotics in construction industry. In IOP Conference. Series: Materials Science and Engineering. IOP Publishing. https://doi.org/10.1088/1757-899X/376/1/012114.
Keerthanaa, P., Jeevitha, K., Navina, V., Indira, G., Jayamani, S. (2013). Automatic wall painting robot. International Journal of Innovative Research in Science, Engineering and Technology, 2(7).
Krom (1997). Industrialization and robotics in construction. Journal of Construction Engineering and Management, ASCE, 111(3), 260–280.
Li, R., & Ng, P. (2017). Wearable robotics and construction workers’ safety and health. In 8th International Conference on Applied Human Factors and Ergonomics.
Li, R. Y. (2018). Robots for the construction industry. Research Gate. https://doi.org/10.1007/978-981-10-5771-7_2
Madsen A. J. (2019). The SAM100: Analyzing labour productivity. California Polytechnic State University-San Luis, Obispo https://digitalcommons.calpoly.edu/cgi/viewcontent.cgi?article=1275&context=cmsp.
Mahbub, R. (2012). Readiness of a developing nation in implementing automation and robotics technologies in construction: A case study of Malaysia. Civil Engineering and Architecture, 6(7).
Malakhov, S., Bezyazeekov, P., Fedorov, Y., Kazarina, Y., Kostunin, D., & Lenok, V. (2020). Background identification algorithm for future self-triggered air-shower radio arrays. Journal of Instrumentation, 14,(09). https://doi.org/10.1088/1748-0221/15/09/c09026.
Oesterreich, T. D., & Teuteberg, F. (2016). Understanding the implications of digitisation and automation in the context of Industry 4.0: A triangulation approach and elements of a research agenda for the construction industry. Computers in Industry, 83, 121–139.
Priyadarshini, I. (2017). Cyber security risks in robotics. In Detecting and mitigating robotic cyber security risks (pp. 333–348).
Ruggiero, A., Salvo, S., & Laurent, C. (2016). Robotics in construction. Unpublished thesis, Worcester Polytechnic Institute.
Semra, A. S., Hafize, B. (2017). Robotics in architecture. In Digital Proceeding of ICOCEE –CAPPADOCIA 2017 New Construction Methods and Hybrid Tectonics, May 8–10, 2017.
Son, H., Kim, C., Kim, H., Han, S. H., & Kim, M. K. (2009). Trend analyses of research and development on automation and robotics technology in the construction industry. KSCE Journal of Civil Engineering, 14(2), 131–139.
Stein, J. J., Gotts, V., & Lahidji, B. (2002). Construction robotics. Retrieved from http://www.ent.ohiou.edu/~tscott/EECFG/ROBOTS.PDF.
Stock, M., Georg, P., Mayer, R., Bohlen, T., & Vatnitsky, S. (2015). Development of clinical programs for carbon ion beam therapy at MedAustron. International Journal of Particle Therapy, 2, 474–477.
Struková, Z., & LÃÅ¡ka, M. (2012). Application of automation and robotics in construction work execution. Journal of Interdisciplinary Research, 2(2), 121–125.
Yahya, M. Y., Yin, L. H., Md. Yassin, A. B., Omar, R., Robin, R. O., Kasim, N. (2019). The challenges of the implementation of construction robotics technologies in the construction. In MATEC Web of Conferences, 266, 05012. https://doi.org/10.1051/matecconf/201926605012.
Author information
Authors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this chapter
Cite this chapter
Adepoju, O. (2022). Robotic Construction Technology. In: Re-skilling Human Resources for Construction 4.0. Springer Tracts in Civil Engineering . Springer, Cham. https://doi.org/10.1007/978-3-030-85973-2_7
Download citation
DOI: https://doi.org/10.1007/978-3-030-85973-2_7
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-85972-5
Online ISBN: 978-3-030-85973-2
eBook Packages: EngineeringEngineering (R0)