Abstract
The method of designing reinforced wooden beams of variable stiffness with group reinforcement is described. The dependence of the breakage of reinforcement in the span on the reinforcement coefficient is given and the influence of changes in the stiffness of structures on the deformability is determined. Theoretical stress diagrams are analyzed, indicating the possibility of hazardous stress concentrations in reinforced beams of variable stiffness. Diagrams M and Q, as well as schemes of theoretical breakage of reinforcement in beams were constructed. The results of determining the influence of the reinforcement coefficient on the place of breakage of reinforcement in the span of beams are displayed graphically. The dependences of the anchorage length on the diameter and reinforcement coefficient, the relative length of the anchorage of the rods on the span of the reinforced beams have been constructed. Defined deflection of reinforced wooden beams of variable stiffness. A further direction of research is indicated, which consists in determining local stresses in zones of change in the stiffness of beams.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Turkovskij SB, Pogorel’tsev AA (2001) Wooden structures with rigid joints in structures with corrosive medium. Promyshlennoe i Grazhdanskoe Stroit 10–13
Buka-Vaivade K, Serdjuks D, Goremikins V, Pakrastins L, Vatin NI (2018) Suspension structure with cross-laminated timber deck panels. Mag Civ Eng. https://doi.org/10.18720/MCE.83.12
Lukin M, Prusov E, Roshchina S, Karelina M, Vatin N (2021) Multi-span composite timber beams with rational steel reinforcements. Buildings. https://doi.org/10.3390/buildings11020046
Göldi M, Sell J, Strässler H (1979) The shearing strength of glue-joints of preimpregnated wood—contribution to the development of weatherproof gluelams | Scherfestigkeit der Klebverbindung von vorimprägniertem Holz—Beitrag zur Entwicklung wetterbeständigen Brettschichtholzes. https://doi.org/10.1007/BF02607422
Roshchina S, Lukin M, Lisyatnikov M (2020) Compressed-bent reinforced wooden elements with long-term load. In: Lecture notes in civil engineering. https://doi.org/10.1007/978-3-030-42351-3_7
Gravit MV, Serdjuks D, Bardin AV, Prusakov V, Buka-Vaivade K (2019) Fire design methods for structures with timber framework. Mag Civil Eng. https://doi.org/10.18720/MCE.85.8
Aleksiievets VI, Aleksiievets II, Ivaniuk AM, Roshchina SI (2020) Load-carrying capacity of bolted joints of timber structures under static loading. In: IOP conference series: materials and science engineering. https://doi.org/10.1088/1757-899X/896/1/012043
Gorpinchenko VM, Pogorel’tsev AA, Ecknadosyan IL (2005) Large-scale tests provided for a block, consisting of two wooden lens-type roof trusses of the sports complex “Strogino.” Promyshlennoe i Grazhdanskoe Stroit 38
Koshcheev AA, Roshchina SI, Naichuk AY, Vatin NI (2020) The effect of eccentricity on the strength characteristics of glued rods made of steel cable reinforcement in solid wood. In: IOP conference series: materials and science engineering. https://doi.org/10.1088/1757-899X/896/1/012059
Haghani R, Al-Emrani M (2012) A new design model for adhesive joints used to bond FRP laminates to steel beams—part a: background and theory. Constr Build Mater. https://doi.org/10.1016/j.conbuildmat.2012.02.051
Lukin MV, Roshchina SI, Smirnov EA, Shunqi M (2020) Strengthening of the operated wooden floor beams with external rigid reinforcement. In: IOP conference series: materials and science engineering. https://doi.org/10.1088/1757-899X/896/1/012065
Ando D, Umemura K (2021) Bond structures between wood components and citric acid in wood-based molding. Polymers (Basel) 13:1–9. https://doi.org/10.3390/polym13010058
Parida G, Johnsson H, Fragiacomo M (2013) Provisions for ductile behavior of timber-to-steel connections with multiple glued-in rods. J Struct Eng (United States) 139:1468–1477. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000735
Roschina SI, Lisyatnikov MS, Koshcheev AA (2019) Technical- and- economic efficiency of reinforced wooden structures. In: IOP conference series: materials and science engineering. https://doi.org/10.1088/1757-899X/698/2/022005
Turkovskij SB, Pogorel’tsev AA, Eknados’yan IL (2003) Selection of design scheme of lens-shaped trusses from adhesive wood. Stroit Mater 18–20
Roschina S, Gribanov A, Lukin M, Lisyatnikov M, Strekalkin A (2018) Calculation of wooden beams reinforced with polymeric composites with modification of the wood compression area. In: MATEC web of conferences. https://doi.org/10.1051/matecconf/201825104029
De Luca V, Marano C (2012) Prestressed glulam timbers reinforced with steel bars. Constr Build Mater 30:206–217. https://doi.org/10.1016/j.conbuildmat.2011.11.016
Koshcheev AA, Roshchina SI, Lukin MV, Lisyatnikov MS (2018) Wooden beams with reinforcement along a curvilinear trajectory. Mag Civil Eng. https://doi.org/10.18720/MCE.81.19
Babiak M, Gaff M, Sikora A, Hysek Š (2018) Modulus of elasticity in three- and four-point bending of wood. https://doi.org/10.1016/j.compstruct.2018.07.113
Lisyatnikov MS, Glebova TO, Ageev SP, Ivaniuk AM (2020) Strength of wood reinforced with a polymer composite for crumpling across the fibers. In: IOP conference series: materials and science engineering. https://doi.org/10.1088/1757-899X/896/1/012062
Steiger R, Gehri E, Widmann R (2007) Pull-out strength of axially loaded steel rods bonded in glulam parallel to the grain. Mater Struct Constr 40:69–78. https://doi.org/10.1617/s11527-006-9111-2
Riberholt H (1986) Glued bolts in Glulam
Lukin MV, Roshchina SI, Gribanov AS, Naychuk AY (2020) Stress-strain state of wooden beams with external reinforcement. In: IOP conference series: materials and science engineering. https://doi.org/10.1088/1757-899X/896/1/012066
Preobrazhenskaya IP, Pogorel’tsev AA, Turkovskij SB (2003) Development of design and construction of potassium chloride storehouse with framework from prefabricated wood frames with size of 63 m. Stroit Mater 14–16
Ling Z, Liu W, Yang H, Chen X (2018) Modelling of glued laminated timber joints with glued-in rod considering bond-slip location function. Eng Struct. https://doi.org/10.1016/j.engstruct.2018.08.098
Tlustochowicz G, Serrano E, Steiger R (2011) State-of-the-art review on timber connections with glued-in steel rods. Mater Struct Constr 44:997–1020. https://doi.org/10.1617/s11527-010-9682-9
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Lisyatnikov, M., Glebova, T., Rusak, K., Ivaniuk, A. (2022). Strength and Deformability of Reinforced Wooden Beams of Variable Stiffness. In: Vatin, N., Roshchina, S., Serdjuks, D. (eds) Proceedings of MPCPE 2021. Lecture Notes in Civil Engineering, vol 182. Springer, Cham. https://doi.org/10.1007/978-3-030-85236-8_48
Download citation
DOI: https://doi.org/10.1007/978-3-030-85236-8_48
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-85235-1
Online ISBN: 978-3-030-85236-8
eBook Packages: EngineeringEngineering (R0)