Abstract
The chapter addresses issues of the interrelation of forest aspects and wood properties as a basis for industrial and engineering design with wood. Typical challenges of the utilization of wood as an engineering material are addressed such as the orthotropic structure and inhomogeneity of the raw material wood, based on the various growth patterns of timber. The latter as one of the most restricting features in wood utilization. Strategies for increasing homogeneity of wood-based materials are provided, as well as approaches for industrial and engineering design and the path from wood-based material properties to engineering design values. This is also the basis for wood material selection approaches.
Once the products come to their end of life, discharging, waste management, and recycling becomes important. A survey of recovery and recycling of wood is provided, and the importance of a proper design for recycling is emphasized.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Delmonte, J.: Origins of Materials and Processes. Technomic Publishing Company, Pennsylvania (1985)
Derry, T.K., Williams, T.I.: A Short History of Technology. Oxford University Press, Oxford (1960)
Ashby, M.F.: Materials and the Environment: Eco-Informed Material Choice. Butterworth Heinemann, Oxford (2009)
Gordon, J.E.: The New Science of Strong Materials. Penguin Books, London (1976)
Miodownik, M.: Stuff Matters: Exploring the Marvelous Materials that Shape Our Man-Made World. Houghten Mifflin Harcourt, Boston (2014)
Ashby, M.F.: Materials Selection in Mechanical Design. Butterworth Heinemann, Oxford (2003)
Ashby, M., Johnson, K.: Materials and Design. The Art an Science of Material Selection in Product Design. Elsevier Butterworth-Heinemann, Oxford (2002)
Perlin, J.A.: Forest Journey. The Role of Wood in the Development of Civilization. Harvard University Press, Cambridge (1889)
Youngquist, W.G., Fleischer, H.O.: Wood in American Life. 1776–2076. Forest Products Research Society, Madison, Wisconsin (1977)
Radkau, J.: Holz. Wie ein Naturstoff Geschichte schreibt. oekom verlag, München (2017)
Radkau, J.: Wood. A History. Polity Press, Cambridge (2012)
Grabner, M.: Werkholz. Eigenschaften und historische Nutzung 60 mitteleuropäischer Baum- und Straucharten. Verlag Dr. Kessel, Remangen-Oberwinter (2017)
Oates, P.B.: The Story of Western Furniture. New Amsterdam Books. c/o Ivan R. Dee, Publisher, Chicago (1998)
Ashby, M.F., Jones, D.R.H.: Engineering Materials 1. An Introduction to Properties, Applications and Design. Elsevier Butterworth-Heinemann, Oxford (2005)
Ashby, M.F., Gibson, L.J., Wegst, U., Olive, R.: Proc. R. Soc. Lond. A. 450, 123–140 (1995)
Schmidhüsen, F., Kaiser, B., Schmidhauser, A., Mellinghoff, S., Perchthaler, K., Kammerhofer, A.: Entrepreneurship and Management in Forestry and Wood Processing. Principles of Business, Economics and Management Processes. Routledge (2016)
Hansen, E., Panwar, R., Vlosky, R.: The Global Forest Sector. Changes, Practices, and Prospects. Taylor & Francis Group, LLC, Boca Raton (2014)
Ashby, M.F.: Materials and the Environment: Eco-Informed Material Choice, 2nd edn. Elsevier Butterworth-Heinemann, Oxford (2013)
Bhamra, T., Lofthouse, V.: Design for Sustainability; a Practical Approach. Routledge/Tayler & Francis Group, London (2016)
Ashby, M.F., Shercliff, H., Cebon, D.: Materials: Engineering, Science, Processing and Design, 4th edn. Butterworth-Heinemann, Amsterdam (2018)
Ashby, M.F.: Materials and Sustainable Development. Butterworth-Heinemann, Amsterdam (2016)
Wegst, U.G.K., Ashby, M.F.: Philos. Mag. 84(21), 2167–2186 (2004)
Fratzl, P.: J.R. Soc. Inter. 4, 637–642 (2007)
Paulitsch, M. Springer-Verlag, Berlin (1989)
EU: Bioeconomy: The European way to use our natural resources. Action plan 2018. European commission. Directorate-General for Research and Innovation, Brussels (2018)
Carus, M., Raschka, A.: Renewable carbon is key to a sustainable and future-oriented chemical industry. Nova paper‚ Paper No. 10 on bio- and CO2-based economy, nova-Institut GmbH, Hirt, Germany, (2018)
Wolfslehner, B., Linser, S., Pülzl, H., Bastrup-Birk, A., Camia, A., Marchetti, M.: Forest Bioeconomy – A New Scope for Sustainability Indicators. From Science to Policy 4. European Forest Institute (2016)
EN 16575, Bio-based products – Vocabulary, (CEN: Brussels, 2014)
Wegst, U.G.K., Ashby, M.F.: The development and use of a methodology for the environmentally-conscious selection of materials. Proceedings. The Third World conference on Integrated Design and Process Technology (IDPT), vol. 5, pp. 88–93. Berlin (1998)
Ashby, M.F.: Materials and the Environment. Eco-Informed Material Choice. Butterworth-Heinemann, Elsevier, Burlington (2009)
Dinwoodie, J.M.: Wood. Nature’s Cellular, Polymeric Fibre-Composite. The Institute of Metals, London (1989)
Harrington, J.J. (2002) Hierarchical modelling of softwood hygro-elastic properties. PhD Thesis, University of Canterbury, NZ
Gibson, L.J.: J. R. Soc. Interface. 9(76), 2749–2766 (2012)
Plomion, C., Leprovost, G., Stokes, A.: Plant Physiol. 127, 1513–1523 (2001)
Barnett, J.R., Jeronimidis, G.: Wood Quality and Its Biological Basis. Blackwell Publishing Ltd., Oxford (2003)
Baas, P., Beeckman, H., Cufar, K., Micco De, V.: IAWA J. 37(2), 121–368 (2016)
Fratzl, P., Weinkamer, R.: Prog. Mater. Sci. 52, 1263–1334 (2007)
Beech, E., Rivers, M., Oldfield, S., Smith, P.P.: J. Sustain. For. 36(5), 454–489 (2017)
Borgström, E. (ed.): Design of Timber Structures. Structural Aspects of Timber Construction, Vols. 1–3. Swedish Forest Industries Federation, Swedish Wood, Stockholm (2016)
Berglund, L., Rowell, R.M.: Wood composites. In: Rowell, R.M., Caldeirea, F., Rowell, J.K. (eds.) Sustainable Development in the Forest Products Industry, pp. 114–126. Universidade Fernando Pessoa, Porto (2010)
Teischinger, A.: Wood Des. Focus. 26(4), 23–26 (2016) ISSN 1066-5757
Bliem, P., Frömel-Frybort, S., van Herwijnen, H.W.G., Pinkl, S., Krenke, T., Mauritz, R., Konnerth, J.: J. Adhes. 96(1–4), 144–164 (2019)
Li, Y., Fu, Q., Yang, X., Berglund, L.: Phil. Trans. R. Soc. A. 376, 20170182 (2018)
Kellomäki, S.: Novel Methods for Tailoring Wood Properties. Wood Wisdom Closing Seminar, Dipoli (2002)
EN 1927 ff, Qualitative classification of softwood round timber. CEN: Brussels, 2008
EN 1316 ff, Hardwood round timber – Qualitative classification. CEN: Brussels, 2013
EN 1315 ff, Dimensional classification of round timber. CEN: Brussels, 2010
Hecker, M., Ressmann, J., Becker, G., et al.: Holz Roh Werkst. 58(3), 168–176 (2000). https://doi.org/10.1007/s001070050408
Murphy, G., Cown, D.: Scand. J. For. Res. 30(8), 757–770 (2015). https://doi.org/10.1080/02827581.2015.1055791
Jones, D., Brischke, C. (eds.): Performance of Bio-Based Building Materials. Woodhead Publishing, Elsevier, Duxford (2017)
Kellomäki, S., Ikonen, V.-P., Peltola, H., Kolström, T.: Ecol. Model. 122(1999), 117–134 (1999)
Teischinger, A.: Starkholzprodukte und Marktchancen. In: Senitza, E. (ed.) Zur Starkholzfrage in Österreich, pp. 125–132. Österreichisches Holzforschungsinstitut (Holzforschung Austria), A-1030 Wien (1992)
Ek, A.R., S.R. Shifley and T.E. Burk (eds.) (1988) Forest growth modeling and prediction, USDA FOR. Serv. Gen. Tech. Rep. NC-120. 1149 p
Aaron, R.W., Hann, D.W., Kershaw, J.A., Vanclay, J.K.: Forest Growth and Yield Modeling. John Wiley & Sons, Ltd. Print ISBN:9780470665008 |Online ISBN:9781119998518. https://doi.org/10.1002/9781119998518
Dykstra, D.P., Monserud, R.A. (eds.): Forest growth and timber quality: Crown models and simulation methods for sustainable forest management. In: Proceedings of an International Conference, USDA, United States Department of Agriculture, Forest Service, (2009)
Ikonen, V.-P., Peltola, H., Wilhelmsson, L., Kilpeläinen, A., Väisänen, H., Nuutinen, T., Kellomäki, S.: For. Ecol. Manag. 256(6), 1356–1371 (2008)
Mäkelä, A., Grace, J.C., Deckmyn, G., Kantola, A., Campioli, M.: For. Sys. 19(SI), 48–68 (2010)
Charpentier, P., Chubinsky, A., Bombardier, V., Longuetaud, F., Mothe, F., et al.: (Actes Forêts de l’Académie technique Saint-Pétersbourg). 202, 158–167 (2013)
Pinto, I., Pereira, H., Usenius, A: Analysis of log shape and internal knots in twenty Maritime pine ( Pinus pinaster Ait.) stems based on visual scanning and computer aided reconstruction. Annals of Forest Science – ANN FOR SCI. 60 (2003)
Seifert, T.: Integration of wood quality, grading and bucking in forest growth models sensitive to silvicultural treatment. Dissertation (in German), Technische Universität München, (2003)
Pretzsch, H., Rais, A.: Wood Sci. Technol. 50, 845–880 (2016). https://doi.org/10.1007/s00226-016-0827-z
FAO 2017: Forest products statistics. Forest products classification and definitions – New proposal. Working Paper No. 14. FAO, Global Strategy, Rome
FAO: Global Forest Products, Facts and Figures 2016. FAO, Food and Agricultural Organization of the United Nations, Geneva (2018)
Nyrud, A.Q., Bringslimark, T.: Wood Fiber Sci. 42, 202–218 (2010)
Teischinger, A. (ed.): Interaktion Mensch Und Holz (Interaction Human and Wood) LIGNOVISIONEN Band 27. University of Natural Resources and Life Sciences (BOKU), Vienna (2013)
Burnard, M.D., Kutnar, A.: Eur. J. Wood Wood Prod. 76, 1093–1100 (2015)
Augustin, S., Fell, D.: Wood as a Restorative Material in Healthcare Environments. FP Innovations, Pointe-Claire (2015)
Ikei, H., Song, C., Miyazaki, Y.: J. Wood Sci. 63, 1–23 (2017)
Burnard, M.D., Kutnar, A.: Human stress responses in office-like environments with wood furniture. Build. Res. Inf. (2019). https://doi.org/10.1080/09613218.2019.1660609
Luisa Demattè, M., Zucco, G.M., Roncato, S., Gatto, P., Paulon, E., Cavalli, R., Zanet, M.: Eur. J. Wood Wood Prod. 76, 1093–1100 (2018)
Berger, G., Katz, H., Petutschnigg, A.J.: For. Prod. J. 56, 42–47 (2006)
Kotradyova, V., Teischinger, A.: Tactile interaction and contact comfort of wood and wood materials. In: 57th International Convention of the Society of Wood Science and Technology (SWST), Zvolen, 23–27 June, 2014. Society of Wood Science and Tec (2014)
Jahan, A., Ismail, M.Y., Sapuan, S.M., Mustapha, F.: Mater. Des. 31, 696–705 (2010)
Eichhorn, S., Eckardt, R., Müller, C.: Einblick in die Geschichte der Holzwerkstoffe im Maschinen- und Anlagenbau und aktuelle Möglichkeiten der angemessenen technischen Nutzung. 8tes Symposium ‚Werkstoffe aus nachwachsenden Rohstoffen‘ – Narotech Erfurt, (2010)
Ljungberg, L.: Mater. Des. 28, 466–479 (2007)
Bovea, M.D., Vidal, R.: Mater. Des. 25, 111–116 (2004)
Gonzalez-Garcia, S., Lozano, R.G., Buyo, P., Pascual, R.C., Gabarrel, X., Pons, J.R., Moreira, M.T., Feijoo, G.: J. Clean. Prod. 27, 21–23 (2012)
Ashby: Materials Selection in Mechanical Design, 4th edn. Butterworth Heinemann Publications, Elsevier (2011). ISBN: 978-1-85617-663-7
Antunes, R.A., Oliveira, M.C.L.: Mater. Des. 63, 247–256 (2014)
Huda, Z., Edi, P.: Materials selection in design of structures and engines of supersonic aircrafts: a review. Mater. Des. 46, 552–560 (2013)
Nemat-Nasser, S., Sadeghi, H., Amirkhizi, A.V., Srivastava, A.: Mech. Res. Commun. 68, 65–69 (2015)
Boeing: Boeing 787 Dreamliner Completes First Flight. Boeing Press Release 15. Dec. 2009. Seattle (2009)
Hucko, M. (2013) Wendig, Fix und ein wenig filzig. Spiegel online. 16.11.2013
Sell, J.: Eigenschaften und Kenngrößen von Holzarten. Baufachverlag, Zürich (1987)
Niemz, P., Sonderegger, W.: Schweiz. Z. Forstwes. 154, 489–493 (2001)
Gibson, L.J., Ashby, M.F., Harley, B.A.: Cellular Materials in Nature and Medicine. Cambridge University Press, Cambridge (2010)
Young, T.M., Shaffer, L.B., Guess, F.M., Bensmail, H., Leon, R.V.: For. Prod. J. 58(4), 39–48 (2008)
Shah, D.U.: Mater. Des. 62, 21–31 (2014)
Pickering, K.L., Aruan Efendy, M.G., Le, T.M.: Compos. Part A. 83, 98–112 (2016)
Gibson, L.J., Ashby, M.F.: Cellular Solids Structure and Properties, 2nd edn. Cambridge University Press, Cambridge (1999)
Thakur, V.K., Thakur, M.K., Kessler, M.R.: Handbook of Composites from Renewable Materials. Scrivener Publishing – Wiley (2017)
Camu, C.T., Aicher, S.: A stochastic Finite Element Model for Glulam Beams of Hardwoods. WCTE 2018, World Conference on Timber Engineering, 20–23 August 2018, Seoul, (2018)
Roudsari, G.M., Mohanty, A.K., Misra, M.: J. Appl. Polym. Sci. (2017). https://doi.org/10.1002/APP.45307
Thömen, H., Haselein, C.R., Humphrey, P.E.: Holz Roh Werkst. 64, 125–133 (2006)
Kain, G., Lienbacher, B., Barbu, M.C., Plank, B., Richter, K., Petutschnigg, A.: Case Studies in Nondestructive Testing and Evaluation. 6, Part B, 21–29 (2016)
Mattheck, C., Bethge, K.: Naturwissenschaften. 85, 1–10 (1998)
Müller, U., Gindl, W., Jeronimidis, G.: Trees. 20, 643–648 (2006)
Müller, U., Gindl-Altmutter, W., Keckes, J.: Trees. 32(4), 1113–1121 (2018)
Eschenauer, H.A., Olhoff, N.: Appl. Mech. Rev. 54, 331–390 (2001)
EN 1995-1-1, Eurocode 5: Design of timber structures – Part 1–1: General – Common rule and rules for buildings (consolidated version), (CEN: Brussels, 2019)
EN 1990, Eurocode – Basis of structural design (consolidated version), CEN -European Committee for Standardization, Brussels, Belgium (2013)
EN 1991-1-1, Eurocode 1: Actions on structures – Past 1–1: General Actions- Densities, self-weight, imposed loads for buildings (consolidated version), CEN -European Committee for Standardization, Brussels, Belgium (2011)
Klieger, R.: Introduction to design and design process. In: Borgström, E. (ed.) Design of Timber Structures. Structural Aspects of Timber Construction, Vol. 1, pp. 8–25. Swedish Forest Industries Federation, Swedish Wood, Stockholm (2016)
Foschi, R.O., Folz, B.R., Yao, F.Z.: Reliability-Based Design of Wood Structures. Department of Civil Engineering University, Vancouver (1989)
Schuëller, G.I.: Ermittlung von Teilsicherheitsbeiwerten der Beanspruchbarkeit im Rahmen des semi-probabilistischen Sicherheitskonzeptes – Erläuterungen zum Entwurf der ÖNORM B 4040
Freudenthal, A.M.: The safety of structures, 805–180, 1947
Mayer, M.: Die Sicherheit der Bauwerke und ihre Berechnung nach Grenzkräften anstatt nach zulässigen Spannungen. Springer, Berlin (1926)
Menezes, R.C.R., Schuëller, G.I.: Akademie Verlag. Band. 99, 173–186 (1997)
Blaß, H.J., Sandhaas, C.: Ingenieurholzbau – Grundlagen der Bemessung. KIT Scientific Publishing (2016)
Harrington, J., Jacob, M., Short, C.: Handbook on Structural Timber Design to Eurocode 5 (IS EN 1995-1-1) Rules Including Strength Capacity Tables for Structural Elements. COFORD, Dublin (2006)
Marmier, J.-P.: Eurocode 5. Design of Timber Structures = Bemessung Und Konstruktion von Holzbauten. Verlags-AG der akademischen technischen Vereine (1993)
Harris, R.J.L.: Manual for the Design of Timber Building Structures to Eurocode 5. The Institution of Structural Engineers, London (2007)
Porteous, J., Kermani, A.: Structural Timber Design to Eurocode 5. Blackwell, Oxford (2007)
Blaß, H.J.: Basis of Design, Material Properties, Structural Components and Joints. Centrum Hout, Almere (1995)
Eric, B.: Design of Timber Structures. SE 102 04. ProService Kommunikation AB, Stockholm (2016)
Colling, F.: Holzbau. Grundlagen und Bemessung nach EC 5. Wiesbaden, Springer Vieweg (2016)
EN 384, Structural timber – Determination of characteristic values of mechanical properties and density. CEN -European Committee for Standardization, Brussels, Belgium (2016)
EN 408, Timber structures – Structural timber and glued laminated timber – Determination of some physical and mechanical properties. CEN -European Committee for Standardization, Brussels, Belgium (2012)
EN 14358, Timber Structures – Calculation and verifiaction of characteristic values. CEN -European Committee for Standardization, Brussels, Belgium (2016)
EN 14080, Timber structures – Glued laminated timber and glued solid timber. CEN -European Committee for Standardization, Brussels, Belgium (2013)
EN 338, Structural timber – strength classes. CEN -European Committee for Standardization, Brussels, Belgium (2016)
Harte, A., Jockwer, R., Stepinac, M., Descamps, T., Rajcic, V., Dietsch, P.: Reinforcement of timber structures – the route to standardisation. In: Jasienko, J., Nowak, T. (eds.) Structural Health Assessment of Timber Structures. DWE, Wroclaw (2015)
Regulation (EU) No 305/2011 of the European Parliament and of the Council of 9 March 2011 laying down harmonised conditions for the marketing of construction products and repealing Council Directive 89/106/EEC, Brussels (2011)
EU Waste Framework Directive 2008/98/EC, European Commission, Brussels (2008)
European Commission: Closing the Loop – An EU Action Plan for the Circular Economy, Brussels (2015)
Teischinger, A., Kalcher, J., Salzger, E., Praxmarer, G., Vanek, M.: General systematic for a design for recycling-guideline for wooden windows and wood aluminium windows. In: CD-ROM Proceedings of the World Conference on Timber Engineering (WCTE 2016), TU Vienna (2016)
Höglmeier, K., Weber-Blaschke, G., Richter, K.: Resour. Conserv. Recycl. 78, 81–91 (2013)
Richter, K., Weber-Blaschke, G., Höglmeier, K.: Projekt X 38. Entwicklung rohstoffgerechter Leitlinien für das Bauen mit Holz. Abschlussbericht (2015)
Pufky-Heinrich, D., Leschinsky, M., Unkelbach, G.: Holz als Rohstoff für die chemische Industrie. Chemie & More (2012)
Emblemsvåg, J., Bras, B.: Activity-Based Cost and Environmental Management: A Different Approach to ISO 14000 Compliance. Kluwer Academic Publishers, Boston (2001)
Teischinger, A.: Design for Recycling: Stoffliche Nutzung von Altholz. In: Achammer, C.M. (ed.) Refurbished Future, pp. 250–257. NWV Verlag, Wien (2011)
Garcia, C.A., Hora, G.: Waste Manag. 70, 189–197 (2017)
EEG: Federal Ministry for Economic Affairs and Energy 2016. Renewable Energy Act, Germany (2017)
German Association of Waste Wood Recyclers (BAV): Waste Wood Recycling in Germany. Principles of Wood Waste Recycling and the Categorisation of Types of Waste Wood. BAV, Berlin (2015)
Knauf, M.: Holz-Zentralblatt. 143(32), 755–756 (2017)
Kovacic, I., Honic, M., Rechberger, H., Oberwinter, L., Lengauer, K., Hagenauer, A., Glöggler, J., Meier, K.: Ed: BMVIT, Schriftenreihe 8/2019. BMVIT, Vienna (2019)
Schneider, U., Böck, M., Mötzl, H., et al.: Recyclingfähig konstruieren: Subprojekt 3 zum Leitprojekt “gugler! build & print triple zero”, 21st edn. BMVIT, Wien (2011)
Hradil P. Barriers and Opportunities of Structural Elements Re-Use: Research Report, 2014
Verein Deutscher Ingenieure (VDI): VDI 2243. Recycling-Oriented Product Development. Verein Deutscher Ingenieure. Beuth, Berlin (2002)
NSD, National Design Specification (NSD) for Wood Construction, Edition 2018. American Wood Council, Leesburg, Virginia 2017
Bartl, A.: Waste Manag. Res. 32(9 Suppl), 3–18 (2014). https://doi.org/10.1177/0734242X14541986
Svilans, T., Tamke, M., Thomsen, M.R., Runberger, J., Strehlke, K., Antemann, M.: New workflows for digital timber. In: Bianconi, F., Filippucci, M. (eds.) Digital Wood Design Innovative Techniques of Representation in Architectural Design. Springer Nature Switzerland AG, Cham (2019)
Longo, B.L., Brüchert, F., Becker, G., Sauter, U.H.: Ann. For. Sci. 76 (2019)
Johansson, E., Johansson, D., Skog, J.: Comput. Electron. Agric. 96, 238–245 (2013)
Sauter, U.H., Laudon, N., Brüchert F.: Automated wood species identification by CT-technology. In: Proceedings IUFRO World Congress 2015. Salt Lake City. The International Forestry, (2014)
Breinig, L., Broman, O., Brüchert, F., Becker, G.: Wood Mater. Sci. Eng. 10(4), 319–334 (2015)
Sauter, U.H., Brüchert, F., Baumgartner, R., Laudon, N., Dold, E.G., Fink, F.: CT-Pro – Neue Produktionssysteme in der Holzindustrie auf der Basis von Hochgeschwindigkeits-CT-Scanning: Teilvorhaben 1: Entwicklung einer Produktionsstrategie zur Hochgeschwindigkeits-Computertomographie bei Holz. Schlussbericht Projekt FKZ FNR-22004410, 66 p (2014)
OECD: Global Material Resources Outlook to 2060: Economic Drivers and Environmental Consequences. OECD Publishing, Paris (2018). https://doi.org/10.1787/9789264307452-en
Lundqvist, S.-O., Gardiner, B.: Key products of the forest-based industries and their demands on wood raw material properties. (2011). https://doi.org/10.13140/RG.2.2.25908.86404
Fürhapper, C., Habla, E., Stratev, D., Weigl, M., Dobianer, K.: Front. Built Environ. 5, 151–158 (2020). https://doi.org/10.3389/fbuil.2019.00151
Teischinger, A.: Österreichische Ingenieur- und Architekten-Zeitschrift. 162(1–12), 75–80 (2017)
Belgacem, M.N., Pizzi, A.: Lignocellulosic Fibres and Wood Handbook. Scrivener Publishing/Wiley, Hoboken/Salem (2019)
Holik, H., Schabel, S.: Flotation. Chapter 5.10. In: Höke, U., Schabel, S. (eds.) Recycled Fibre and Deinking. Book 7 of the Series Papermaking Science and Technology, pp. 210–230, 2nd totally updated edition. Paperi ja Puu Oy, Helsinki (2009)
Naujock, H.-J.: Altpapieraufbereitung. Chapter 7. In: Blechschmidt, J. (ed.) Taschenbuch der Papiertechnik, pp. 159–188. Fachbuchverlag Leipzig in Carl Hanser Verlag, München (2009)
CEPI: Paper-Based Packaging and Recyclability Guidelines. Cepi (The Confederation of European Paper Industries) et al., Brussels (2019)
EPF: Annual Report 2016–2017. Tech. Rep. (EPF/European Panel Federation, Brussels, Belgium 2017)
Risse, M., Weber-Blaschke, G., Richter, K.: Sci. Total Environ. 661, 107–119 (2019)
Irle, M., Privat, F., Couret, L., Belloncle, C., Déroubaix, G., Bonnin, E., Cathala, B.: Wood Mater. Sci. Eng. 14(1), 19–23 (2019). https://doi.org/10.1080/17480272.2018.1427144
Eisenlauer, M., Graf, H., Teipel, U.: Chemie Ingenieur Technik. 90, 521–532 (2018). https://doi.org/10.1002/cite.201700097
McGavin, et al.: Bioresources. 15(3), 4640–4645 (2020)
ISO 14044:2006 Environmental management – Life cycle assessment – Requirements and guidelines, ISO, Geneva 2006
Nyrud, A.Q., Bringslimark, T.: Wood Fiber Sci. 42(2), 202–218 (2010)
Jalilzadehazhari, E., Johansson, J.: Wood Mater. Sci. Eng. 14(4), 192–200 (2019). https://doi.org/10.1080/17480272.2019.1575901
Aries, M., Aarts, M., van Hoof, J.: Light. Res. Technol. 47(1), 6–27 (2015)
ISO/DIS 17300-1 (2019) Wood residue and post-consumer wood – Classification. Part 1: Vocabulary. ISO, Geneva
FAO (2018) Forest products annual market review 2017–2019. FAO, UNECE, United Nations Publications Sales No. E 18.II.E.27. United Nations Economic Commission for Europe, Geneva, Switzerland
Iha, N.K.: Green Design and Manufacturing for Sustainability. CRC Press/Taylor and Francis Group, Boca Raton (2016)
Grote, V., Frühwirth, M., Lackner, H.K., Goswami, N., Köstenberger, M., Likar, R., Moser, M.: Int. J. Environ. Res. Public Health. 18, 9749 (2021). https://doi.org/10.3390/ijerph18189
Müller, U., Teischinger, A.: Connections in wood and material efficiency: Wood formation follows mechanical load. In: Allner, L., Kaltenbrunner, C., Kröhnert, D., Reinsberg, P. (eds.) Institute of Architecture at the University of Applied Arts Vienna, and Institute of Art Sciences and Art Education at the University of Applied Arts Vienna. Conceptual Joining: Wood Structures from Detail to Utopia, pp. 30–37. Birkhäuser, Berlin/Boston (2021)
Cristescu, C., Honfi, D., Sandberg, K., Sandin, Y., Shotton, E., Walsh, S.J., Cramer, M., Ridley, D., Arana-fernández, M. De, Llana, D.F., Barbero, M.G., Nasiri, B., Krofl, Ž.: Design for deconstruction and reuse of timber structures – state of the art review Design for deconstruction and reuse of timber structures – state of the art review. (2020). https://doi.org/10.23699/bh1w-zn97. RISE report 2020:05, Stockholm, Sweden
Acknowledgments
The design and illustration of typical silhouettes of different tree species by Christian Huber/BOKU (University of Natural Resources and Life Science, Vienna) is gratefully acknowledged.
The editorial support from BOKU students Simon Winter and Luca Giordano Nüssel is gratefully acknowledged.
We are very grateful for discussing Sect. 34.5 with Assoc. Prof. Dr. Anton Kraler, University of Innsbruck, Timber Engineering Unit – Institute for Construction and Materials Science, and discussion with Prof. Dr. Peter Schwarzbauer, BOKU Vienna, various data on global wood and material demand in Sect. 34.1. Manfred Brandstätter and Silvia Polleres, Holzforschung Austria, for their support on standards issues in Sect. 34.5.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2023 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Teischinger, A., Maderebner, R., Petutschnigg, A. (2023). Aspects of Wood Utilization and Material Selection. In: Niemz, P., Teischinger, A., Sandberg, D. (eds) Springer Handbook of Wood Science and Technology. Springer Handbooks. Springer, Cham. https://doi.org/10.1007/978-3-030-81315-4_34
Download citation
DOI: https://doi.org/10.1007/978-3-030-81315-4_34
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-81314-7
Online ISBN: 978-3-030-81315-4
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)