Abstract
This chapter provides an overview of typical factory acceptance test processes for power transformers and reactors, with a special emphasis on ensuring that user or purchaser expectations and requirements are met. This chapter provides guidance on each test, including the methodology used; the applicability of the test to different transformers and reactors; acceptance criteria; and possible problems arising during the test.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
CIGRE Brochure 655: Technology and utilisation of oil-immersed shunt reactors, final report of CIGRE working group A2.48 (May 2016)
GOST Standard R 52719: Power transformers – general specifications (2007)
IEC Standard 60060-2: High voltage test techniques – measuring systems, 3rd edn (November 2010)
IEC Standard 60076-1: Power transformers – general, 3rd edn (April 2011)
IEC Standard 60076-10: Power transformers – determination of sound levels, 2nd edn (March 2016)
IEC Standard 60076-10-1: Power transformers – determination of sound levels – application guide, 2nd edn, 1st amendment (November 2011)
IEC Standard 60076-18: Power transformers – measurement of frequency response, 1st edn (July 2012)
IEC Standard 60076-3: Power transformers – insulation levels, dielectric tests, and external clearances in air, 3rd edn (July 2013)
IEC Standard 60076-5: Power transformers – ability to withstand short-circuit, 3rd edn (February 2006)
IEC Standard 60076-6: Power transformers – reactors, 1st edn (December 2007)
IEC Standard 60076-8: Power transformers – application guide, 1st edn (October 1997)
IEC Standard 60137: Insulated bushings for alternating voltages above 1000V, 7th edn (June 2017)
IEC Standard 60475: Method of sampling insulating liquids, 2nd edn (October 2011)
IEC Standard 61869-1: Instrument transformers – general requirements, 1st edn (October 2007)
IEC Standard 61869-2: Instrument transformers – additional requirements for current transformers, 1st edn (September 2012)
IEC Technical Specification 60076-19: Power transformers – rules for the determination of uncertainties in the measurement of the losses on power transformers and reactors, 2nd edn (March 2013)
IEC/IEEE Standard 60076-16: Power transformers – transformers for wind turbine applications, 2nd edn (September 2018)
IEEE Standard C57.12.00: IEEE standard for general requirements for liquid-immersed distribution, power, and regulating transformers (2015)
IEEE Standard C57.12.90: IEEE standard test code for liquid-immersed distribution, power, and regulating transformers (2015)
Acknowledgments
The authors gratefully acknowledge the contributions of the Prof Antonio Bossi, Stefan Dragostinov, Prof Paul Jarman, Christoph Ploetner, and Simon Ryder.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2022 Springer Nature Switzerland AG
About this entry
Cite this entry
Breckenridge, T., Montenegro, S. (2022). Transformer and Reactor Testing – Introduction and Performance Tests. In: Bastos, G.M., Breckenridge, T., Lamb, M., MacArthur, TL., Ryder, S. (eds) Transformer and Reactor Procurement. CIGRE Green Books. Springer, Cham. https://doi.org/10.1007/978-3-030-80469-5_12
Download citation
DOI: https://doi.org/10.1007/978-3-030-80469-5_12
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-80468-8
Online ISBN: 978-3-030-80469-5
eBook Packages: Earth and Environmental ScienceReference Module Physical and Materials ScienceReference Module Earth and Environmental Sciences