Skip to main content

The Main Parameters of the Physalis Convection Drying Process

  • Conference paper
  • First Online:
Advances in Design, Simulation and Manufacturing IV (DSMIE 2021)

Abstract

The experimental research results of the intensified convective process of drying of physalis at a constant temperature using the laboratory installation providing the set temperature modes of conducting the process in the set time interval on all working zones of drying had resulted. The process of convective drying was improved. The rehydration process’s rational parameters were substantiated for the use of dried products in the food industry to preserve vitamin composition and nutrients in the maximum amount. It was proved that the drying process’s temperature regimes significantly impact energy savings and the cost of the final product. It was established that the dried finished product (physalis) is better stored if drying is carried out at low temperatures. Rational parameters of the drying process of physalis fruits were experimentally established, at which the optimum regenerative capacity of drying temperature (for particles) is 90 °C, (for circles) is 70 °C. As a result of research, it was proved that with increasing temperature of drying physalis (circles), cells decrease in volume due to moisture release. The higher the temperature, the more steam is released, and the cells coagulate into a small ball. The corresponding regression equations approximate the experimental studies’ results. These equations allow setting the final product’s moisture content, which will depend on the temperature and duration of the process.

This is a preview of subscription content, log in via an institution to check access.

Access this chapter

Chapter
USD 29.95
Price excludes VAT (USA)
  • Available as PDF
  • Read on any device
  • Instant download
  • Own it forever
eBook
USD 129.00
Price excludes VAT (USA)
  • Available as EPUB and PDF
  • Read on any device
  • Instant download
  • Own it forever
Softcover Book
USD 169.99
Price excludes VAT (USA)
  • Compact, lightweight edition
  • Dispatched in 3 to 5 business days
  • Free shipping worldwide - see info

Tax calculation will be finalised at checkout

Purchases are for personal use only

Institutional subscriptions

Similar content being viewed by others

References

  1. Babych, M., Kovalenko, A.: Food security indicators in Ukraine: current state and trends of development. Baltic J. Econ. Stud. 4(1), 8–15 (2018)

    Article  Google Scholar 

  2. Li, F., Chen, G., Zhang, B., Fu, X.: Current applications and new opportunities for the thermal and non-thermal processing technologies to generate berry product or extracts with high nutraceutical contents. Food Res. Int. 100, 19–30 (2017)

    Google Scholar 

  3. Sukhenko, Y., Mushtruk, M., Vasyliv, V., Sukhenko, V., Dudchenko, V.: Production of pumpkin pectin paste. In Ivanov, V., et al. (eds.) Advances in Design, Simulation and Manufacturing II. DSMIE-2019. Lecture Notes in Mechanical Engineering, pp. 805–812. Springer, Switzerland (2019)

    Google Scholar 

  4. Cooperstone, J., Francis, D., Schwartz, S.: Thermal processing differentially affects lycopene and other carotenoids in cis-lycopene containing, tangerine tomatoes. Food Chem. 210, 466–472 (2016)

    Article  Google Scholar 

  5. Ali, A., Yeoh, W., Forney, C., Siddiqui, M.: Advances in postharvest technologies to extend the storage life of minimally processed fruits and vegetables. Critical Rev. Food Sci. Nutrition 58(15), 2632–2649 (2018)

    Article  Google Scholar 

  6. Castro-Ibáñez, I., Gil, M.I., Allende, A.: Ready-to-eat vegetables: current problems and potential solutions to reduce microbial risk in the production chain. LWT-food Sci. Technol. 85, 284–292 (2017)

    Google Scholar 

  7. Onwude, D., Hashim, N., Janius, R., Nawi, N., Abdan, K.: Modeling the thin-layer drying of fruits and vegetables. Comprehensive Rev. Food Sci. Food Safety 15(3), 599–618 (2016)

    Article  Google Scholar 

  8. Zheplinska, M., Mushtruk, M., Vasyliv, V., Deviatko, O.: Investigation of the process of production of crafted beer with spicy and aromatic raw materials. Potravinarstvo Slovak J. Food Sci. 13(1), 806–814 (2019)

    Article  Google Scholar 

  9. Mghazli, S., Ouhammou, M., Hidar, N., et al.: Drying characteristics and kinetics solar drying of Moroccan rosemary leaves. Renew. Energy 108, 303–310 (2017)

    Article  Google Scholar 

  10. Teschner, T., Bansemer, R., Weltmann, K.D., Gerling, T.: Investigation of power transmission of a helium plasma jet to different dielectric targets considering operating modes. Plasma 2(3), 348–359 (2019)

    Article  Google Scholar 

  11. Pásztory, Z., Horváth, T., Glass, S.V., Zelinka, S.: Experimental investigation of the influence of temperature on thermal conductivity of multilayer reflective thermal insulation. Energy Build. 174, 26–30 (2018)

    Article  Google Scholar 

  12. Bengtsson-Palme, J., Milakovic, M., Švecová, H., et al.: Industrial wastewater treatment plant enriches antibiotic resistance genes and alters the structure of microbial communities. Water Res. 162, 437–445 (2019)

    Article  Google Scholar 

  13. Odarchenko, D., Odarchenko, A., Lisnichenko, O., Spodar, K. Scientific substantiation of the methodology of preparation of quince japanese for analysis and investigation of consumer properties of the products of its recycling. EUREKA Life Sci. (3), 48–53 (2019)

    Google Scholar 

  14. Petrova, J., Snezhkin, Yu., Samoylenko, K.: Investigation of heat of evaporation of moisture from betanin-containing plant raw materials in the process of dehydration by the method of synchronous thermal analysis. Sci. Papers [Odesa Natl. Acad. Food Technol.] 47(2), 33–38 (2017)

    Google Scholar 

  15. Kutsenko, S., Ruban, O., Kovalevskaya, I.: Justification of the optimal dry massing regime for encapsulation. Ukrainian Med. Almanach 17(1), 33–35 (2014)

    Google Scholar 

  16. Assegehegn, G., Brito-de la Fuente, E., Franco, J.M., Gallegos, C.: The importance of understanding the freezing step and its impact on freeze-drying process performance. J. Pharmaceutical Sci. 108(4), 1378–1395 (2019)

    Google Scholar 

  17. Chever, S., Mejean, S., Dolivet, A., et al.: Agglomeration during spray drying: physical and rehydration properties of whole milk/sugar mixture powders. LWT-Food Sci. Technol. 83, 33–41 (2017)

    Article  Google Scholar 

  18. Harnkarnsujarit, N., Kawai, K., Watanabe, M., Suzuki, T.: Effects of freezing on microstructure and rehydration properties of freeze-dried soybean curd. J. Food Eng. 184, 10–20 (2016)

    Google Scholar 

  19. Barone, G., O’Regan, J., O’Mahony, J.A.: Influence of composition and microstructure on bulk handling and rehydration properties of whey protein concentrate powder ingredients enriched in α-lactalbumin. J. Food Eng. 255, 41–49 (2019)

    Article  Google Scholar 

  20. Katsen-Globa, A., Puetz, N., Gepp, M., Neubauer, J., Zimmermann, H.: Study of SEM preparation artefacts with correlative microscopy: cell shrinkage of adherent cells by HMDS-drying. Scanning 38(6), 625–633 (2016)

    Article  Google Scholar 

  21. Zhang, N., Zhou, C., Xia, W., Nguyen, A.: Volatilization of mercury in coal during conventional and microwave drying and its potential guidance for environmental protection. J. Cleaner Prod. 176, 1–6 (2018)

    Article  Google Scholar 

  22. Luo, G., Song, C., Hongjie, P., et al.: Optimization of the microwave drying process for potato chips based on the measurement of dielectric properties. Drying Technol. 37(11), 1329–1339 (2019)

    Article  Google Scholar 

  23. Ullah, H., Shahab, A., Rashid, A.: Volatilization characteristics of selenium during conventional and microwave drying of coal slime: an emerging contaminant in mining industry. Environ. Sci. Pollution Res. 22, 1–10 (2020)

    Google Scholar 

  24. Parra, E., Uraoka, N., Jiang, M., et al.: Validation of multiplex immunofluorescence panels using multispectral microscopy for immune-profiling of formalin-fixed and paraffin-embedded human tumor tissues. Sci. Rep. 7(1), 1–11 (2017)

    Article  Google Scholar 

  25. Cropotova, J., Mozuraityte, R., Standal, I., Rustad, T.: Assessment of lipid oxidation in Atlantic mackerel (Scomber scombrus) subjected to different antioxidant and sous-vide cooking treatments by conventional and fluorescence microscopy methods. Food Control 104, 1–8 (2019)

    Article  Google Scholar 

  26. Palamarchuk, I., Mushtruk, M., Sukhenko, V., et al.: Modelling of the process of vybromechanical activation of plant raw material hydrolysis for pectin extraction. Potravinarstvo Slovak J. Food Sci. 14, 239–246 (2020)

    Article  Google Scholar 

  27. Areiza-Mazo, N., Robles, J., Zamudio-Rodriguez, J., et al.: Extracts of Physalis peruviana protect astrocytic cells under oxidative stress with rotenone. Front. Chem. 6, 276 (2018)

    Article  Google Scholar 

  28. Deng, L.Z., Mujumdar, A.S., Zhang, Q., et al.: Chemical and physical pretreatments of fruits and vegetables: effects on drying characteristics and quality attributes–a comprehensive review. Critical Rev. Food Sci. Nutrition 59(9), 1408–1432 (2019)

    Article  Google Scholar 

  29. Etzbach, L., Meinert, M., Faber, T., et al.: Effects of carrier agents on powder properties, stability of carotenoids, and encapsulation efficiency of goldenberry (Physalis peruviana L.) powder produced by co-current spray drying. Curr. Res. Food Sci. 3, 73–81 (2020)

    Google Scholar 

  30. Yang, Y., Ding, Z., Wang, Y., et al.: Systems pharmacology reveals the mechanism of activity of Physalis Alkekengi L. var. Franchetii against Lipopolysaccharide-induced acute lung injury. J. Cellular Molecular Med. 24(9), 5039–5056 (2020)

    Google Scholar 

Download references

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Mikhailo Mushtruk .

Editor information

Editors and Affiliations

Rights and permissions

Reprints and permissions

Copyright information

© 2021 The Author(s), under exclusive license to Springer Nature Switzerland AG

About this paper

Check for updates. Verify currency and authenticity via CrossMark

Cite this paper

Zheplinska, M., Mushtruk, M., Vasyliv, V., Slobodyanyuk, N., Boyko, Y. (2021). The Main Parameters of the Physalis Convection Drying Process. In: Ivanov, V., Pavlenko, I., Liaposhchenko, O., Machado, J., Edl, M. (eds) Advances in Design, Simulation and Manufacturing IV. DSMIE 2021. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-77823-1_31

Download citation

  • DOI: https://doi.org/10.1007/978-3-030-77823-1_31

  • Published:

  • Publisher Name: Springer, Cham

  • Print ISBN: 978-3-030-77822-4

  • Online ISBN: 978-3-030-77823-1

  • eBook Packages: EngineeringEngineering (R0)

Publish with us

Policies and ethics