Abstract
This article introduces the design of a multi-head fully automatic plug-in machine control system design based on special-shaped components. The control system software is written in the LabVIEW environment, which can realize automatic feeding, automatic loading and unloading and transportation of PCB boards, plug-in detection, and bent pins. Functions to meet the needs of machine debugging and plug-in processing. The main content of the research is based on the LabVIEW 2018 environment development workbench's zero return, parking, and plug-in shift functions. The workbench movement is driven by a servo system, controlled by a motion control card, and coordinated with machine vision positioning technology to achieve fast and accurate plugin.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Zhang, T.: The Secondary Development of the Motion Control System of Four-DOF Series Robot. A Thesis Submitted for the Degree of Master. Henan Polytechnic University (2011)
Si, P.: The comprehensive comparison of performance of stepping motor and AC servo motor. Electronic Test (13), 85–86+47(2015)
Baoquan, K., Shukang, C.: AC Servo Motor and its Control Technology. Machinery Industry Press, Beijing (2017)
Yang, L.: Research on Machine Vision and its Servo Positioning System. A Thesis Submitted for the Degree of Master.Xidian University (2012)
Jeffrey, Y.: Beyon. LabVIEW Programming Data Acquisition and Analysis. Prentice-Hall International, London (2001)
[USA] Gary, W.: Johnson Richard Jennings. LabVIEW Graphic Programming. Peking University Press, Beijing (2002)
Wei, Y.: Analysis of Virtual Instruments and Virtual Experiments Based on LabVIEW. A Thesis Submitted for the Degree of Master Gansu University of Political Science and Law (2017)
Jiang, J., Liu, J.: LabVIEW Programming Tutorial. Electronic Industry Press, Beijing(2008)
Author information
Authors and Affiliations
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Mingyou, W., Changsen, S., Libin, Y., Weiming, L. (2021). Design and Analysis of Special-Shaped Automatic Plug-In Machine Control System. In: Zhen, D., et al. Proceedings of IncoME-V & CEPE Net-2020. IncoME-V 2020. Mechanisms and Machine Science, vol 105. Springer, Cham. https://doi.org/10.1007/978-3-030-75793-9_42
Download citation
DOI: https://doi.org/10.1007/978-3-030-75793-9_42
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-75792-2
Online ISBN: 978-3-030-75793-9
eBook Packages: EngineeringEngineering (R0)