Abstract
Cyber-Physical Production Systems (CPPS) are receiving a lot of attention in the context of the fourth industrial revolution, especially in terms of complex architectures for data exchange among intelligent machines. However, the present elaboration is rather based on the question of what support such systems can provide for the exchange and appropriation of knowledge-intensive human practices in industrial surroundings. This paper presents the method and conceptual foundations of an Augmented Reality (AR) and sensor technology based CPPS for manual set-up processes on modern production machines. In the present context, both the recording of physical movements and the representation of local knowledge are potentially relevant. The basis is formed by design implications identified in the course of an extensive ethnographic study through the implementation of which a new methodological approach to the capture and transfer of (technical) knowledge embedded in embodied actions could be realized.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Ludwig, T., Kotthaus, C., Stein, M., Durt, H., Kurz, C., Wenz, J., Doublet, T., Becker, M., Pipek, V., Wulf, V.: Arbeiten im Mittelstand 4.0 – KMU im Spannungsfeld des digitalen Wandels. HMD Praxis Der Wirtschaftsinformatik, 53(1), 1–16 (2016)
Janssen, S.: Möller, K: Erfolgreiche Steuerung von Innovationsprozessen und -projekten – Ergebnisse einer empirischen Studie. Zeitschrift für Controll. Manag. 55(2), 97–104 (2011)
Bhattacharya, B., Winer, E.H.: Augmented reality via expert demonstration authoring (AREDA). Comput. Ind. 105, 61–79 (2019)
Voigt, K.-I.: Rüstprozesse. In: Winter, E. (eds.) Gabler Wirtschaftslexikon. Springer Gabler (2016)
Abele, N.D., Hoffmann, S., Kuhnhen, C., Ludwig, T., Schäfer, W., Schweitzer, M., Wulf, V.: Supporting the set-up processes by cyber elements based on the example of tube bending. In: Mayr, H.C., Pinzger, M. (eds.) Informatik 2016 – Informatik von Menschen für Menschen. GI-Edition-Lecture Notes in Informatics (LNI), Klagenfurt, pp. 1627–1637 (2016)
Watson, S., Hewett, K.: A multi-theoretical model of knowledge transfer in organizations: determinants of knowledge contribution and knowledge reuse. J. Manag. Stud. 43(2), 141–173 (2006)
Nonaka, I., Toyama, R., Konno, N.: SECI, Ba and leadership: a unified model of dynamic knowledge creation. Longe Range Plan. 33(1), 5–34 (2000)
Ackerman, M.S., Halverson, C.: Sharing expertise: the next step for knowledge management. In: Huysman, M., Wulf, V. (eds.) Social Capital and Information Technology, pp. 273–299. MIT Press, London (2004)
Schmidt, K.: The concept of ‘practice’: what’s the point? In: Rossitto, C., Ciolfi, L., Martin, D., Conein, B. (eds.) COOP 2014. Proceedings of the 11th International Conference on the Design of Cooperative Systems, pp. 427–444. Springer, Nice (2014)
Gallagher, S.: Merleau-Ponty’s phenomenology of perception. TOPOI 29(2), 183–185 (2010)
Klopfer, E., Perry, J., Squire, K., Jan, M.: Collaborative learning through augmented reality role playing. In: Proceedings of the 2005 Conference on Computer Support for Collaborative Learning: Learning 2005: the Next 10 years!. International Society of the Learning Sciences, pp. 311–315 (2005)
Ong, S.K., Yuan, M.L., Nee, A.Y.C.: Augmented reality applications in manufacturing: a survey. Int. J. Prod. Res. 46(10), 2707–2742 (2008)
Tang, A., Neustaedter, C., Greenberg, S.: Videoarms: embodiments for mixed presence groupware. In: Bryan-Kinns, N., Blanford, A., Curzon, P., Nigay, L. (eds.) People and Computers XX – Engage, pp. 85–102. Springer, London (2007)
Paelke, V., Röcker, C.: User Interfaces for Cyber-Physical System: Challenges and Possible Approaches. Springer, Cham (2015)
Lee, J., Bagheri, B., Kao, H.A.: A cyber-physical systems architecture for Industry 4.0-based manufacturing systems. Manuf. Lett. 3, 18–23 (2015)
Wulf, V., Rohde, M., Pipek, V., Stevens, G.: Engaging with practices: design case studies as a research framework in CSCW. In: Proceedings of CSCW 2011, pp. 505–512 (2011)
Goodwin, C.: Professional Vision. American Anthropologist (1994)
Heath, C., Luff, P.: Disembodied Conduct: communication through video in a multi-media office environment. In: CHI 1999 – Proceedings of the SIGCHI Conference on Human Factors in Computing Systems, pp. 99–103. ACM, New York (1991)
Knoblauch, H., Baer, A., Laurier, E., Petschke, S., Schnettler, B.: Visual analysis. New developments in the interpretative analysis of video and photography. In: Forum: Qualitative Social Research (2008)
Czarniawska, B.: Shadowing, and Other Techniques for Doing Fieldwork in Modern Societies. Copenhagen Business School Press, Herndon (2007)
Hermanowicz, J.C.: The great interview: 25 strategies for studying people in bed. Qual. Sociol. 25(4), 479–499 (2002)
Braun, V., Clarke, V.: Thematic analysis. In: Cooper, H., Camic, P.M., Long, D.L., Panter, A.T., Rindskopf, D., Sher, K.J. (eds.) APA Handbook of Research Methods in Psychology, vol. 2, pp. 57–71. American Psychological Association, Washington DC (2012)
Bryman, A.: Social Research Methods. Oxford University Press, New York (2008)
Abele, N.D.: Cyber-physische Rüstunterstützung – Ergonomische Untersuchung zur Evaluierung physischer und kognitiver Beanspruchung des Menschen bei der Nutzung eines Head-Mounted Display (HMD). In: Arbeit interdisziplinär analysieren – bewerten – gestalten, Proceedings des 65. Frühjahrskongresses der Gesellschaft für Arbeitswissenschaft. GfA-Press, Dortmund (2019)
Abele, N.D., Kluth, K.: Beanspruchungsbezogene Evaluierung AR-basierter versus papierunterstützter Rüstinstruktionen zur Einrichtung von Industriemaschinen. In: Digitale Arbeit, digitaler Wandel, digitaler Mensch? Proceedings des 66. Frühjahrskongresses der Gesellschaft für Arbeitswissenschaft. GfA-Press, Dortmund (2020)
Creswell, J.W., Clark, V.L.P., Gutmann, M., Hanson, W.E.: Advanced mixed methods research designs. In: Tashakkori, A., Teddlie, C. (eds.) Handbook of Mixed Methods in Social and Behavioral Research, pp. 209–240. Sage, Thousand Oaks (2003)
De Carvalho, A.F.P., Hoffmann, S., Abele, N.D., Schweitzer, M., Tolmie, P., Randall, D., Wulf, V.: Of embodied action and sensors. Knowledge and expertise sharing in industrial set-up. Comput. Supp. Coop. Work 27(3–6), 875–916 (2018)
Shingo, S.: A Revolution in Manufacturing: The SMED System. CRC Press, Boca Raton (1985)
Acknowledgements
The findings in this paper originate from the research project ‘Cyberrüsten 4.0: Cyber-physische Unterstützung des Menschen beim Rüstvorgang am Beispiel eines Biegeprozesses zur Kleinserienfertigung auf Basis eines Wissenstransferansatzes’, funded by a grant of the European Union and EFRE.NRW (No. EFRE-0800263).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Abele, N.D., Hoffmann, S., De Carvalho, A.F.P., Schweitzer, M., Wulf, V., Kluth, K. (2021). Knowledge and Expertise Sharing – Designing an AR-Mediated Cyber-Physical Production System for Industrial Set-Up Processes. In: Black, N.L., Neumann, W.P., Noy, I. (eds) Proceedings of the 21st Congress of the International Ergonomics Association (IEA 2021). IEA 2021. Lecture Notes in Networks and Systems, vol 221. Springer, Cham. https://doi.org/10.1007/978-3-030-74608-7_44
Download citation
DOI: https://doi.org/10.1007/978-3-030-74608-7_44
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-74607-0
Online ISBN: 978-3-030-74608-7
eBook Packages: EngineeringEngineering (R0)