Abstract
Deficient workstation designs are an important risk factor of suffering musculoskeletal disorders (MSDs) among operators in manufacturing companies. Postural and fatigue analyses can provide valuable information for the ergonomic design of workstations, as well as increasing the sustainability of manufacturing companies. The objective of this research is to propose a novel integrated approach by using postural and fatigue analyses for the ergonomic design and improvement of workstations as a strategy to increase sustainability of manufacturing companies. The proposed methodology comprises three stages: (1) workstations prioritization, (2) postural assessment and fatigue analyses using Rapid Upper Limb Assessment (RULA) and Muscle Fatigue Analysis (MFA), as well as (3) intervention and control stage. To validate this integrated approach, a case study was conducted analyzing the manual tasks from a group of employees in two production lines in a manufacturing company. As main results, 16 workstations were analyzed using the proposed methodology. In three of them the risk level for MSDs was found as moderate and reduced after ergonomic interventions. Absenteeism decreased by 88% and the production rate was increased in 31.35% after four weeks of the ergonomic design implementation. As a result, the integration of postural and fatigue analyses may lead to the ergonomic design for workstations and their improvement. Consequently, this approach can facilitate the increase of sustainability in manufacturing companies and employees’ well-being by making a better use of the human resources, reducing absenteeism, and increasing production rates and performance.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Amazon HP 15.6-inch Notebook PC [In Spanish]. https://www.amazon.com/-/es/portátil-HP-Dual-Core-Bluetooth-altavoces/dp/B077HZQKJQ/ref=sr_1_7?qid=1574825789&refinements=p_89%3AHP&s=pc&sr=1-7. Accessed 26 Nov 2019
Bergsten EL, Mathiassen SE, Larsson J, Kwak L (2018) Implementation of an ergonomics intervention in a Swedish flight baggage handling company—a process evaluation. PLoS ONE 13:1–17. https://doi.org/10.1371/journal.pone.0191760
Califano R, Naddeo A, Vink P (2017) The effect of human-mattress interface’s temperature on perceived thermal comfort. Appl Ergon 58:334–341. https://doi.org/10.1016/j.apergo.2016.07.012
Damayanti KA, Tesavrita C (2018) Fatigue measurement of elderly workers in small and medium enterprises. Rev Integr Bus Econ Res 7:144–151
de Freitas Penteado EV, de França MG, de Brito Ramalhoto AM, de Oliveira AM, Machado BR, Genipapeiro JA (2012) Implementation of ergonomics in a service unit: challenges and advances. Work 41:2633–2636. https://doi.org/10.3233/WOR-2012-0654-2633
Diario Oficial de la Federación (2018) Official Mexican Standard NOM-036-1-STPS-2018, Ergonomic risk factors at work-Identification, analysis, prevention and control. Part 1: Manual handling of loads [In Spanish]. https://diariooficial.gob.mx/nota_detalle.php?codigo=5544579&fecha=23/11/2018. Accessed 17 Dec 2019
Diego-Mas J (2015) Postural evaluation using the RULA method [In Spanish]. https://www.ergonautas.upv.es/metodos/rula/rula-ayuda.php. Accessed 11 Oct 2016
Dul J, Neumann W (2009) Ergonomics contributions to company strategies. Appl Ergon 40:745–752. https://doi.org/10.1016/j.apergo.2008.07.001
Easton G (2010) One case study is enough. Lancaster, The Department of Marketing
Easton G (2010) Critical realism in case study research. Ind Mark Manag 39:118–128. https://doi.org/10.1016/j.indmarman.2008.06.004
Escalante M (2009) Evaluación Ergonómica de Puestos de Trabajo. In: Seventh LACCEI Latin American and Caribbean Conference for Engineering and Technology. 7th Latin American and Caribbean Conference for Engineering and Technology. San Cristobal, pp 1–7
Hamja A, Maalouf M, Hasle P (2019) Assessing the effects of lean on occupational health and safety in the Ready-Made Garment industry. Work 64:385–395. https://doi.org/10.3233/WOR-192982
Hanafie A, Haslindah A, Saripuddin M, Yunus A (2018) Implementation of Ergonomics in the Management of Crop Yields Using Combine Harvesters. Int J Adv Sci Res Eng 4. https://doi.org/10.31695/IJASRE.2018.32786
Hernández-Arellano JL, Castillo J, Serratos-Perez N, García-Alcaraz JL (2015) Relationship between Workload and Fatigue among Mexican Assembly Operators. Int J Phys Med Rehabil 3. https://doi.org/10.4172/2329-9096.1000315
Hernández J, Brunette M, Ibarra G, García-Alcaraz J (2012) Fatigue factors in operators of semi-automated machinery in Mexico [In Spanish]. Ing Ind 30:11–28
Higgins NA, Talone AB, Fraulini NW, Smither JA (2017) Human factors and ergonomics assessment of food pantry work: a case study. Work 56:455–462. https://doi.org/10.3233/WOR-172511
Hitka M, Kucharčíková A, Štarchoň P et al (2019) Knowledge and human capital as sustainable competitive advantage in human resource management. Sustainability 11:4985–5003. https://doi.org/10.3390/su11184985
Instituto Nacional de Estadística Geografía e Informática (INEGI) (2020a) National Statistical Directory of Economic Units [in Spanish]. https://www3.inegi.org.mx/sistemas/mapa/denue/. Accessed 5 July 2020
Instituto Nacional de Estadística Geografía e Informática (INEGI) (2020b) Manufacturing Statistics and Export Maquiladora [in Spanish]. In: Manuf. Stat. Export Maquiladora [in Spanish]. https://www.inegi.org.mx/temas/manufacturasexp/
International Ergonomics Association (IEA) (2018) Definition and Domains of Ergonomics. https://iea.cc/what-is-ergonomics/. Accessed 2 Nov 2018
Kathiravan S, Gunarani GI (2018) Ergonomic Performance Assessment (EPA) Using RULA and REBA for Residential Construction in Tamil Nadu. Int J Civ Eng Technol 9:836–843
Lee PJ, Lee BK, Jeon JY et al (2016) Impact of noise on self-rated job satisfaction and health in open-plan offices: a structural equation modelling approach. Ergonomics 59:222–234. https://doi.org/10.1080/00140139.2015.1066877
Lew AA, Ng PT, Ni C (Nickel), Wu T (Emily) (2016) Community sustainability and resilience: similarities, differences and indicators. Tour Geogr 18:18–27. https://doi.org/10.1080/14616688.2015.1122664
López-Cañero J (2016) Assembly of air conditioning equipment [in Spanish], 1st edn. Paraninfo, Madrid
Ma L, Chablat D, Bennis F, Zhang W (2009) A new simple dynamic muscle fatigue model and its validation. Int J Ind Ergon 39:211–220. https://doi.org/10.1016/J.ERGON.2008.04.004
Madadizadeh F, Vali L, Rafiei S, Akbarnejad Z (2017) Risk factors associated with musculoskeletal disorders of the neck and shoulder in the personnel of Kerman University of Medical Sciences. Electron Physician 9:4341–4348. https://doi.org/10.19082/4341
Maldonado-Macías A, Alvarado A, García JL, Balderrama C (2013) Intuitionistic fuzzy TOPSIS for ergonomic compatibility evaluation of advanced manufacturing technology. Int J Adv Manuf Technol 70:2283–2292. https://doi.org/10.1007/s00170-013-5444-5
Maldonado-Macías A, Realyvásquez A, Hernández J, García-Alcaraz JL (2015) Ergonomic assessment for the task of repairing computers in a manufacturing company: a case study. Work 52:393–405. https://doi.org/10.3233/WOR-152118
Maldonado-Macías AA, Alferez-Padron CR, García-Alcaraz JL, Avelar-Sosa L (2018) Knowledge Management and Ergonomics Implementation in Manufacturing Systems: Development and Validation of a Questionnaire for Critical Success Factors. In: Baporikar N (ed) Knowledge Integration Strategies for Entrepreneurship and Sustainability, 1st edn. IGI-Global, Hershey, Pensilvania, pp 188–213
Marchese D, Reynolds E, Bates ME, Morgan H, Clark SS, Linkov I ( 2018) Resilience and sustainability: similarities and differences in environmental management applications. Sci Total Environ 613–614:1275–1283. https://doi.org/10.1016/j.scitotenv.2017.09.086
McAtamney L, Nigel Corlett E (1993) RULA: a survey method for the investigation of work-related upper limb disorders. Appl Ergon 24:91–99. https://doi.org/10.1016/0003-6870(93)90080-S
MEDIAactive (2010a) Learn Excel 2010 with 100 practical exercises [in Spanish], 1st edn. Marcombo, Barcelona
MEDIAactive (2010b) Excel 2010 Manual [in Spanish], 1st edn. Marcombo, Barcelona
Meyer F, Eweje G, Tappin D (2017) Ergonomics as a tool to improve the sustainability of the workforce. Work 57:339–350. https://doi.org/10.3233/WOR-172563
Munguía-Vega NE, Flores-Barboa VS, Zepeda-Quintana DS, Velazquez-Contraras LE (2019) Assessing the effectiveness of integrating ergonomics and sustainability: a case study of a Mexican maquiladora. Int J Occup Saf Ergon 25:587–596. https://doi.org/10.1080/10803548.2017.1419589
Nava R, Castro J, Rojas L, Gómez M (2015) Evaluación ergonómica de los Puestos de Trabajo del Área Administrativa. REDIELUZ 3:27–35
Ng A, Hayes MJ, Polster A (2016) Musculoskeletal disorders and working posture among dental and oral health students. Healtcare 4:13–27. https://doi.org/10.3390/healthcare4010013
Nikon Nikon D500| DSLR de lentes intercambiables de Nikon. In: Especificaciones. https://www.nikon.com.mx/nikon-products/product/dslr-cameras/d500.html#tab-ProductDetail-ProductTabs-TechSpecs. Accessed 26 Nov 2019
Nourollahi M, Afshari D, Dianat I (2018) Awkward trunk postures and their relationship with low back pain in hospital nurses. Work 59:317–323. https://doi.org/10.3233/WOR-182683
Odebiyi DO, Akanle OT, Akinbo SR, Balogun SA (2016) Prevalence and Impact of Work-Related Musculoskeletal Disorders on Job Performance of Call Center Operators in Nigeria. Int J Occup Env Med 7:98–106. https://doi.org/10.15171/ijoem.2016.622
Omidiandost A, Sohrabi Y, Poursadeghiyan M, Yarmohammadi H, Mosavi A (2015) Evaluation of general and local lighting as an environmental ergonomics factor in different parts of a hospital in the city of Kermanshah in 2015. Tech J Eng Appl Sci 5:255–259
Pakhomova A, Salnikova Y, Namestnikova L, Marahovskaya I (2020) The use of ergonomic methods for ensuring the competitiveness of business structures. In: Kantola JI, Nazir S (eds) Advances in Human Factors, Business Management and Leadership. AHFE 2019. Advances in Intelligent Systems and Computing. Springer Verlag, Washington, DC, pp 361–367
Pereira F (2014) Mental workload, task demand and driving performance: what relation? Procedia—Soc Behav Sci 162:310–319. https://doi.org/10.1016/j.sbspro.2014.12.212
Plantard P, Shum HPH, Le Pierres AS, Multon F (2017) Validation of an ergonomic assessment method using Kinect data in real workplace conditions. Appl Ergon 65:562–569. https://doi.org/10.1016/j.apergo.2016.10.015
Realyvásquez A, García-Alcaraz JL, Blanco-Fernández J (2016) Development and validation of a macroergonomic compatibility questionnaire [in Spanish]. Contaduría Y Adm 61:478–498. https://doi.org/10.1016/j.cya.2016.04.002
Rodríguez-Ruíz Y, Guevara-Velasco C (2011) Assessment of Workstations Using ERIN and RULA Ergonomic Tools [in Spanish]. Ing Ind 32:19–27
Roostaie S, Nawari N, Kibert CJ (2019) Sustainability and resilience: a review of definitions, relationships, and their integration into a combined building assessment framework. Build Environ 154:132–144. https://doi.org/10.1016/j.buildenv.2019.02.042
Sarkar K, Dev S, Das T et al (2015) Examination of postures and frequency of musculoskeletal disorders among manual workers in Calcutta, India. Int J Occup Environ Health 22:151–158. https://doi.org/10.1080/10773525.2016.1189682
Sharan D, Jose JA, Rajkumar JS (2019) How to perform an ergonomic workplace analysis? In: Bagnara S, Tartaglia R, Albolino S, et al. (eds) Proceedings of the 20th Congress of the International Ergonomics Association (IEA 2018). IEA 2018. Advances in Intelligent Systems and Computing. Springer Verlag, pp 7–11
Shirzaei M, Mirzaei R, Khaje-Alizade A, Mohammadi M (2015) Evaluation of ergonomic factors and postures that cause muscle pains in dentistry students’ bodies. J Clin Exp Dent 7:e414–e418. https://doi.org/10.4317/jced.51909
Singh H, Singh LP (2019) Musculoskeletal disorders among insurance office employees: a case study. Work 64:153–160. https://doi.org/10.3233/WOR-192978
Singh J, Lal H, Kocher G (2012) Musculoskeletal Disorder Risk Assessment in Small Scale forging Industry by using RULA Method. Int J Eng Adv Technol 1:513–518
Stanton NA, Hedge A, Brookhuis K et al (2005) Handbook of Human Factors and Ergonomics Methods. CRC Press, Boca Raton, FL
Tsang EWK (2014) Case studies and generalization in information systems research: a critical realist perspective. J Strateg Inf Syst 23:174–186. https://doi.org/10.1016/j.jsis.2013.09.002
Vieira L, Balbinotti G, Varasquin A, Gontijo L (2012) Ergonomics and Kaizen as strategies for competitiveness: a theoretical and practical in an automotive industry. Work 41:1756–1762. https://doi.org/10.3233/WOR-2012-0381-1756
Acknowledgements
Authors want to thank the manufacturing company for allowing to conduct this research in its facilities among its employees. Also, thanks to the Technological Instituto of Tijuana for providing the equipment, materials, and facilities that were necessary to conduct this project. Finally, authors want to thank SEMAC for providing training and software to develop the present research project.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Realyvásquez Vargas, A., Maldonado-Macías, A.A., García-Alcaraz, J.L. (2021). Postural and Fatigue Analyses for Ergonomic Workstations Design as an Integrated Approach to Sustainable Workplaces. In: Realyvásquez Vargas, A., García-Alcaraz, J.L., Z-Flores, E. (eds) New Perspectives on Applied Industrial Ergonomics. Springer, Cham. https://doi.org/10.1007/978-3-030-73468-8_13
Download citation
DOI: https://doi.org/10.1007/978-3-030-73468-8_13
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-73467-1
Online ISBN: 978-3-030-73468-8
eBook Packages: EngineeringEngineering (R0)