Abstract
Concrete and reinforced concrete are currently used for the construction of buildings and structures. At negative temperatures, the hydration of the binder slows down and the solidification of mortars proceeds quite slowly, and the strength set of mortars and concrete mixtures stops. As a result, to ensure a set of strength in winter conditions, it is necessary to introduce antifreezing chemical additives into the mortars, which contribute to the normal flow of cement hydration processes. In this regard, the urgent task is the correct and rational choice of raw materials, which directly affect the durability and reliability of concrete and reinforced concrete products and structures. Therefore, in the course of research, most of the time is devoted directly to the study and selection of raw materials for the preparation of concretes and mortars. It is impossible to achieve the necessary durability of concrete without introducing chemical additives into its composition. The paper presents a study of antifreezing additives that positively affect the properties and durability of concrete and mortars and work effectively in conditions of negative temperatures. Optimal dosages of the studied additives were determined and the influence of new types of additives on the strength characteristics of concrete and mortars was studied.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Denisova, Y.V., Kosuhin, M.M., Popova, A.V., Shapovalov, N.A., Leshhev, S.I., Kamorova, N.D.: Vibrocompressed concrete with superplasticizer based on resorcinol-formaldehyde oligomers. Build. Mater. 10, 32–33 (2016)
Poluektova, V.A., Shapovalov, N.A.: Fundamental patterns of influence of the structure and composition of the oxyphenol oligomers on the plastification of cement mixtures. Int. J. Pharm. Technol. 8(4), 22716–22725 (2016)
Babkov, V.V., Sahibgareev, R.R., Kolesnik, G.S.: Rational scope of modified concrete in modern construction. Const. Mater. 10, 20–22 (2006)
Bazhenov, Y.M.: Concrete Technology. ACV, Moscow (2003)
Gridchin, A.M., Kosuhin, M.M., Lesovik R.V.: Construction materials. Betonovedenie: laboratory practicum. 2-nd ed., revised. and extras. BSTU named after V.G. Shukhov, Belgorod (2005)
Alfimova, N.I., Kalatozi, V.V., Karatsupa, S.V., Vishnevskaya, Y., Sheychenko, M.S.: Mechanoactivation as a way to increase the efficiency of using raw materials of different genesis in construction materials. Bulletin of BSTU named after V.G. Shukhov 6, 85–89 (2016)
Shapovalov, N.A., Denisova, J.V., Poluektova, V.A.: Biocidal research of oxyphenolic modifiers for fungicidal properties. Int. J. Pharm. Technol. 8(4), 24976–24986 (2016)
Shapovalov, I.V., Ogrel, L.S., Kosuhin, M.M., Pavlenko, V.I., Popova, Y.V., Shapovalov, N.A., Slyusar, A.A.: Mineral building modifier Fungicidal compositions. RF Patent 2,235,695 (2006)
Shapovalov, I.V., Ogrel, L.S., Kosuhin, M.M., Pavlenko, V.I., Popova, Y.V., Shapovalov, N.A., Slyusar, A.A.: Modifier compositions. Envir Syst. Dev. 4, 50–51 (2006)
Narayanan, N., Ramamurthy, K.: Structure and properties of aerated concrete: a review. Cement Concr. Comp. 22(5), 321–329 (2000)
Wan-liang, Z., Jing-hua, L., Bing-gen, Z.: Further study on property of fly ashfluorogypsum-cement composite binder. J. Build. Mater. 2, 13–18 (2008)
Shahova, L.D., Chernositova, E.S., Denisova, J.V.: Flowability and durability of cement containing technological additives during grinding process. AER-Adv. Eng. Res. 133, 162–167 (2017)
Denisova, J.V.: Additive technology in construction. Const. Mater. Prod. 1(3), 43–50 (2018)
Alfimova, N.I., Shadskiy, E.E., Lesovik, R.V., Ageeva, M.S.: Organic-mineral modifier on the basis of volcanogenic-sedimentary rocks. Int. J. Appl. Eng. Res. 10(24), 45131–45136 (2015)
Klyuev, S.V., Khezhev, T.A., Pukharenko, Y.V., Klyuev, A.V.: Experimental study of fiber-reinforced concrete structures. Mater. Sci. Forum 945, 115–119 (2018)
Klyuev, S.V., Khezhev, T.A., Pukharenko, Y.V., Klyuev, A.V.: To the question of fiber reinforcement of concrete. Mater. Sci. Forum 945, 25–29 (2018)
Kamalova, Z.A.: Superplastifikatory in manufacturing technology of composite concrete. Herald Kazan Univ. 16(8), 148–152 (2013)
Acknowledgements
The work is realized in the framework of the Program of flagship university development on the base of the Belgorod State Technological University named after V.G. Shukhov, using equipment of High Technology Center at BSTU named after V.G. Shukhov.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Denisova, J.V. (2021). Application of Antifreezing Additives in Mortars. In: Klyuev, S.V., Klyuev, A.V. (eds) Proceedings of the International Conference Industrial and Civil Construction 2021. ICICC 2021. Lecture Notes in Civil Engineering, vol 147. Springer, Cham. https://doi.org/10.1007/978-3-030-68984-1_15
Download citation
DOI: https://doi.org/10.1007/978-3-030-68984-1_15
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-68983-4
Online ISBN: 978-3-030-68984-1
eBook Packages: EngineeringEngineering (R0)