Abstract
The article describes research aimed at the determination of parameters of an optical inspection station on the Smart Factory automatic production line. This work proposes a fully automated approach for vision-based quality control. The starting point for achieving the set objective was to perform a concise analysis of literature on quality control and to become familiar with the functioning of software provided by the hardware producer. The optical inspection software was developed for a product consisting of blocks. The developed software consists of two modules used for two cameras. As part of the design work, an optical inspection algorithm for a specific finished product was developed, parameters were determined, and the place for the introduction of an optical assessment station in the existing production line was indicated. The article describes an algorithm that enables the introduction of an optical inspection station in the production line. The developed algorithm was evaluated under real (in a laboratory) inspection conditions.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Kujawińska, A., Vogt, K.: Analysis of the impact of selected work factors on the efficiency of visual inspection. Mach. Eng. 18(1), 40–51 (2013). [in Polish]
Hamrol, A., Kujawińska, A., Bożek, M.: Quality inspection planning within a multistage manufacturing process based on the added value criterion. Int. J. Adv. Manuf. Technol. 108, 1–14 (2020)
Goliński, M., Spychała, M., Szafranski, M., Graczyk-Kucharska, M.: Competency management as the direction of the development of enterprises-based on research. In: 3rd International Conference on Social Science, Shanghai, China, pp. 391–399. Published by DEStech Publications, Inc. (2016)
Baygini, M., Aygin, M.: Deep learning based approaches for machine vision inspection applications. In: International Conference on Advanced Technologies, ICAT 2018, p. 63 (2018)
Materials from the company OMRON
Garbacz, P., Giesko, T.: Multi-camera vision system for the inspection of metal shafts. In: Szewczyk, R., Zieliński, C., Kaliczyńska, M. (eds.) Challenges in Automation, Robotics and Measurement Techniques, ICA 2016. Advances in Intelligent Systems and Computing, vol. 440. Springer, Cham (2016)
Wojciechowski, J., Suszynski, M.: Optical scanner assisted robotic assembly. Assem. Autom. 37, 4 (2017)
Klos, S., Patalas-Maliszewska, J.: Using a simulation method for intelligent maintenance management. In: Burduk, A., Mazurkiewicz, D. (eds.) Advances in Intelligent Systems and Computing, vol. 637, pp. 85–95. Springer International Publishing (2018)
Vieira, G.G., Varela, M.L.R., Putnik, G.D., Machado, J.M., Trojanowska, J.: Integrated platform for real-time control and production and productivity monitoring and analysis. Rom. Rev. Precis. Mech. Opt. Mechatron. 50, 119–127 (2016)
Hawary, A.F., Hoe, Y.H., Bakar, E.A., Othman, W.A.F.W.: A study of gauge repeatability and reproducibility of the back-end semiconductor lead inspection system. Robotika 1(2), 1–6 (2019)
Varela, M.L.R., Putnik, G.D., Manupati, V.K., Rajyalakshmi, G., Trojanowska, J., Machado: Collaborative manufacturing based on cloud, and on other I4.0 oriented principles and technologies: a systematic literature review and reflections. Manag. Prod. Eng. Rev. 9(3), 90–99 (2018)
Krenczyk, D., Skolud, B., Olender, M.: Semi-automatic simulation model generation of virtual dynamic networks for production flow planning. IOP Conf. Ser.: Mater. Sci. Eng. 145, 042021 (2016)
Pavlenko, I., Trojanowska, J., Gusak, O., Ivanov, V., Pitel, J., Pavlenko, V.: Estimation of the Reliability of Automatic Axial-balancing Devices for Multistage Centrifugal Pumps. Periodica Polytechnica Mechanical Engineering 63(1), 52–56 (2019)
Batchelor, B.G.: Machine Vision for Industrial Applications. Springer (2012)
Malamas, E.N., et al.: A survey on industrial vision systems, applications and tools. Image Vis. Comput. 21(2), 171–188 (2003)
Acknowledgments
The paper is prepared and financed by scientific statutory research conducted by the Division of Production Engineering, Faculty of Mechanical Engineering, Poznan University of Technology, Poznan, Poland, supported by the Polish Ministry of Science and Higher Education from the financial means in 2019–2020 (0613/SBAD/8727).
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this paper
Cite this paper
Diering, M., Kacprzak, J. (2021). Optical Inspection Software for a Selected Product on the Smart Factory Production Line. In: Tonkonogyi, V., et al. Advanced Manufacturing Processes II . InterPartner 2020. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-68014-5_76
Download citation
DOI: https://doi.org/10.1007/978-3-030-68014-5_76
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-68013-8
Online ISBN: 978-3-030-68014-5
eBook Packages: EngineeringEngineering (R0)