Abstract
The separation of granular materials into specific fractions by size on sieve classifiers is a large and complex system both in terms of the separation process and hardware design. The separation process depends on many design and operating parameters, the shape and size of the sieve cells, the number of sieves, as well as the fractional composition, shape and particle size of the material to be separated, i.e. is a cyber-physical system (CPS). The key to CPS is the mathematical model of the separation process, which is used in the control system. A mathematical model of the process of separation of granular materials on sieve classifiers based on the theory of random processes is developed. As a random process, the linear particle density of the considered fractions on the sieve surface is considered and a system of stochastic differential equations is constructed for its determination. The obtained solutions allow us to determine the recovery coefficient and evaluate the separation efficiency. Based on the constructed mathematical model, the design and operational parameters of the classifier were optimized. The performance criteria and separation efficiency are considered as optimization criteria. All this allows us to control the process of separation of granular materials by determining the optimal values of the operating parameters of the classifier depending on the fractional composition, shape and size of the particles of the original material to be separated and its other characteristics.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Vaysberg, L.A., Ivanov, K.S., Mel’nikov, A.E.: Improving the approaches to mathematical modeling of vibration screening processes. Obogashcheniye rud 2, 21–24 (2013)
Akhmadiev, G.F., Gizzyatov, R.F., Nazipov, I.T.: Hydrogasdynamics and kinetics of separation of disperse media on sieve classifiers. J. Eng. Phys. Thermophy. 90, 1077–1086 (2017). https://doi.org/10.1007/s10891-017-1659-x
Nepomnyashchiy, E.A.: Kinetics of some processes of processing dispersed materials. Theor. Found. Chem. Eng. 7(5), 75 (1973)
Gortinskiy, V.V., Demskiy, A.V., Boriskin, M.A.: Separation processes in grain processing enterprises. Kolos, Moskov (1973)
Akhmadiev, F.G., Gizzyatov, R.F.: Modeling of separation of granular materials on multiple-deck classifiers using the theory of stochastic processes. Theor. Found. Chem. Eng. 52, 360–370 (2018). https://doi.org/10.1134/S0040579518030028
Ogurtsov, V.A., Fedosov, S.V., Mizonov, V.E.: Modeling the kinetics of vibration screening based on the theory of Markov chains. Build. Mater. 5, 33–35 (2008)
Dolgunin, V.N., Ukolov, A.A., Ivanov, O.O.: Kinetic laws of segregation during the fast gravitational flow of granular materials. Theor. Found. Chem. Technol. 40(4), 423–435 (2006)
Kumar, D., Iveson, S.M., Galvin, K.P.: Novel jamming mechanism for dry separation of particles by density. Miner. Eng. 148, 106185 (2020). https://doi.org/10.1016/j.mineng.2020.106185
Beeckmans, J.M., Jutan, A.: Monte Carlo simulation of a probability screen. Can. J. Chem. Eng. 67(2), 329 (1989). https://doi.org/10.1002/cjce.5450670220
Pascoe, R.D., Fitzpatrick, R., Garratt, J.R.: Prediction of automated sorter performance utilizing a Monte Carlo simulation of feed characteristics. Miner. Eng. 72, 101 (2014). https://doi.org/10.1016/j.mineng.2014.12.026
Akhmadiev, F.G., Gizzyatov, R.F., Kiyamov, K.G.: Mathematical modeling of thin-layer separation of granular materials on sieve classifiers. Theor. Found. Chem. Eng. 47(3), 254–261 (2013). https://doi.org/10.1134/S0040579513030019
Generalov, M.B.: Mekhanika tverdykh dispersnykh sred v protsessakh khimicheskoi tekhnologii (Mechanics of Solid Disperse Media in Chemical Engineering Processes). Izd. Bochkarevoi, Kaluga (2002)
Akhmadiev, F.G., Nazipov, I.T.: Stochastic modeling of the kinetics of processing of heterogeneous systems. Theor. Found. Chem. Eng. 47(2), 136–143 (2013). https://doi.org/10.1134/S0040579513020012
Ryzhkov, A.F., Tolmachev, Y.M.: On the selection of the optimal height of the vibrated bed. Theor. Found. Chem. Eng. 17(2), 206 (1983)
Golovanevskiy, V., Arsentyev, V., Blekhman, I., Vasilkov, V., Azbel, Y., Yakimova, K.: Vibration-induced phenomena in bulk granular materials. Int. J. Miner. Process. 100(3), 79–85 (2011). https://doi.org/10.1016/j.minpro.2011.05.001
Nigmatulin, R.I.: Fundamentals of the mechanics of heterogeneous media, p. 336. Nauka, Moscow (1978)
Akhmadiev, F.G., Gizzyatov, R.F., Nazipov, I.T.: Mathematical modeling of processes of classification of granular materials on the sieve. J. Mod. High Technol. 12(1), 30–35 (2019). https://doi.org/10.17513/snt.37828
Barsky, M.D.: Optimization of separation processes of granular materials, p. 168. Nedra, Moscow (1978). https://doi.org/10.1016/B978-0-444-63919-6.00006-6
Akhmadiev, F.G.: Some problems of multicriteria process optimization. Theor. Found. Chem. Eng. 48(5), 574–582 (2014). https://doi.org/10.1134/S0040579514050145
Detyna, J., Bieniek, J.: Methods of statistical modelling in the process of sieve separation of heterogeneous particles. Appl. Math. Model. 32(6), 992–1002 (2008)
Kazakov, V.A.: Introduction to the Theory of Markov Processes and Some Radio Engineering Problems, p. 232. Sov. Radio, Moscow (1973)
Tikhonov, V.I., Mironov, M.A.: Markov Processes, p. 488. Sovetskoe Radio, Moscow (1977)
Feller, W.: An introduction to probability theory and its applications 2. Ann. Probab. 1(1), 193–196 (1973). https://doi.org/10.1214/aop/1176997039
Karpenko, A., Agasiev, T., Sakharov, M.: Intellectualization methods of population algorithms of global optimisation/cyber-physical systems: advances in design and modelling. Stud. Syst. Decis. Control 259, 137–151 (2020). https://doi.org/10.1007/978-3-030-32579-4_11
Akhmadiev F.G., Gizzyatov R.F., Nazipov, I.T.: Computer simulation and optimization of the kinetics of the processing of heterogeneous media. Certificate of the State Registration of a Computer Program no. 2016661926. (2016)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Author(s), under exclusive license to Springer Nature Switzerland AG
About this chapter
Cite this chapter
Akhmadiev, F., Gizzyatov, R., Nazipov, I. (2021). Modeling of Vibration Separation of Bulk Materials Based on the Theory of Random Processes. In: Kravets, A.G., Bolshakov, A.A., Shcherbakov, M. (eds) Cyber-Physical Systems: Modelling and Intelligent Control. Studies in Systems, Decision and Control, vol 338. Springer, Cham. https://doi.org/10.1007/978-3-030-66077-2_6
Download citation
DOI: https://doi.org/10.1007/978-3-030-66077-2_6
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-66076-5
Online ISBN: 978-3-030-66077-2
eBook Packages: EngineeringEngineering (R0)