Abstract
Pyrometallurgical route is the most effective way to extract copper from Cu–Fe–S ores. In the smelting process, the concentrate is partially oxidized to Cu-rich matte and most of the impurities are reported to the slag. Copper content in the slag represents the direct recovery of copper in the smelting process. High-temperature experiments have been carried out to investigate the effects of slag composition, matte grade, and temperature on copper content in the smelting slag. Industrial and synthetic slag samples were equilibrated with matte at different temperatures in argon gas flow. The quenched samples were analysed by electron probe X-ray microanalysis to obtain the microstructure and phase compositions at high temperatures. Optimised parameters including slag composition, matte grade, and temperature have been proposed for the flash smelting furnace operations to minimize the copper content in the slag. The experimental results are also compared with the FactSage calculations.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Schlesinger ME, King MJ, Sole KC, Davenport WG (2011) Extractive metallurgy of copper, 5th edn. Elsevier, Oxford
Bellemans I, De Wilde E, Moelans N, Verbeken K (2018) Metal losses in pyrometallurgical operations—a review. Adv Colloid Interface Sci 255:47–63
Chen M, Contreras L, Zhao B (2016) Comparison of slag chemistry between teniente converter and flash smelting furnace. In: Proceedings of 9th international copper conference, Kobe, Japan, November 13–16, 2016, pp 967–975, The Mining and Materials Processing Institute of Japan (MMIJ) and Japan Mining Industry Association (JMIA)
Mackey PJ (1982) The physical chemistry of copper smelting slags—a review. Can Metall Q 21:221–260
Nagamori M (1974) Metal loss to slag: part II. Oxidic dissolution of nickel in fayalite slag and thermodynamics of continuous converting of nickel-copper matte. Metall Trans 5:539–548
Bale CW, Bélisle E, Chartrand P, Decterov SA, Eriksson G, Gheribi AE, Hack K, Jung IH, Kang YB, Melançon J, Pelton AD (2016) FactSage thermochemical software and databases, 2010–2016. Calphad 55: 1–19
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Minerals, Metals & Materials Society
About this paper
Cite this paper
Cornejo, K., Chen, M., Zhao, B. (2021). Control of Copper Loss in Flash Smelting Slag. In: Li, B., et al. Materials Engineering—From Ideas to Practice: An EPD Symposium in Honor of Jiann-Yang Hwang. The Minerals, Metals & Materials Series. Springer, Cham. https://doi.org/10.1007/978-3-030-65241-8_7
Download citation
DOI: https://doi.org/10.1007/978-3-030-65241-8_7
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-65240-1
Online ISBN: 978-3-030-65241-8
eBook Packages: Chemistry and Materials ScienceChemistry and Material Science (R0)