Abstract
Modern and daily applications such as air conditioners and humidifiers and moisture/humidity sensors are extensively used in several industrial process control, medical sciences, food manufacture, farming, home ventilation, meteorological weather forecasting, medical incubation, manufacturing of important electrical equipment’s, fabrication of semiconducting devices, organic LEDs, preservation of foods and food products, etc. This chapter describes the fabrication of two important capacitive humidity sensors such as interdigitated and parallel plate types. Range of humidity measurement is extremely wide. It extends from traces (low level) of humidity to percentage relative humidity. Parallel plate capacitor is for low-level humidity detection, and the interdigitated capacitor is for measuring relative humidity level. Both types of sensors have been fabricated by using nanostructure porous aluminum oxide (Al2O3) thin film (prepared by sol-gel method). Porous Al2O3 is one of the most suitable metal oxide sensing materials that have potential to measure humidity over wide range. Its small pore radius makes it very sensitive and attractive to low humidity. Details of fabrication of the sensors using sol-gel dip-coating method have been discussed. Also, the preparation of boehmite Al2O3 sol solution for the metal oxide film (by adopting the Yoldas method) has been explained in details.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Brinker CJ, Scherer GW (2013) Sol-gel science: the physics and chemistry of sol-gel processing. Academic. https://doi.org/10.1002/adma.19910031025
Brinker C, Bunker B, Tallant D, Ward K, Kirkpatrick R (1988) Structure of sol—gel-derived inorganic polymers: silicates and borates. ACS Publications. https://doi.org/10.1021/bk-1988-0360.ch026
Brinker CJ, Ashley CS, Cairncross RA, Chen KS, Hurd AJ, Reed ST, Samuel J, Schunk PR, Schwartz RW, Scotto CS (1996) Sol—gel derived ceramic films—fundamentals and applications. In: Metallurgical and ceramic protective coatings. Springer, pp 112–151. https://doi.org/10.1007/978-94-009-1501-5_6
Bunshah RF (1994) Handbook of deposition technologies for films and coatings: science, technology, and applications. William Andrew, Norwich. https://doi.org/10.1002/adma.19950070128
Castellanos-Ramos J, Navas-González R, Macicior H, Sikora T, Ochoteco E, Vidal-Verdú F (2010) Tactile sensors based on conductive polymers. Microsyst Technol 16(5):765–776. https://doi.org/10.1007/s00542-009-0958-3
Coleman M, Gurnett G (1977) Gold thick film conductors. Gold Bull 10(3):74–75. https://doi.org/10.1007/BF03215436
Corti C, Holliday R (2009) Gold: science and applications. CRC Press, Boca Raton. https://doi.org/10.1201/9781420065268
Fenner R, Zdankiewicz E (2001) Micromachined water vapor sensors: a review of sensing technologies. IEEE Sensors J 1(4):309–317. https://doi.org/10.1109/7361.983470
Finch R (1972) Gold in thick film hybrid microelectronics. Gold Bull 5(2):26–30. https://doi.org/10.1007/BF03215155
Hanaor D, Triani G, Sorrell CC (2011) Morphology and photocatalytic activity of highly oriented mixed phase titanium dioxide thin films. Surf Coat Technol 205(12):3658–3664. https://doi.org/10.1016/j.surfcoat.2011.01.007
Hoffman LC, McMunn CW, Mones AH, Short OA (1976) Gold conductor compositions. Google Patents
Huang J, Wu Y, Gu C, Zhai M, Yu K, Yang M, Liu J (2010) Large-scale synthesis of flowerlike ZnO nanostructure by a simple chemical solution route and its gas-sensing property. Sensors Actuators B Chem 146(1):206–212. https://doi.org/10.1016/j.snb.2010.02.052
Hutagalung SD, Choon LS (2009) Optical properties of ZnSe Nanodots embedded in SiO2 thin films. Afr Phys Rev 2(3):159–160
Islam T, Kumar L, Khan SA (2012) A novel sol–gel thin film porous alumina based capacitive sensor for measuring trace moisture in the range of 2.5–25 ppm. Sensors Actuators B Chem 173:377–384. https://doi.org/10.1016/j.snb.2012.07.014
Islam T, Khan AU, Akhtar J, Rahman MZU (2014) A digital hygrometer for trace moisture measurement. IEEE Trans Ind Electron 61(10):5599–5605. https://doi.org/10.1109/TIE.2013.2297295
Jones RW (1990) Fundamental principles of sol-gel technology. Institute of Metals, London, p 128
Khan S, Lorenzelli L, Dahiya RS (2014) Technologies for printing sensors and electronics over large flexible substrates: a review. IEEE Sensors J 15(6):3164–3185. https://doi.org/10.1109/JSEN.2014.2375203
Korvink J, Chandran L, Boltshauser T, Baltes H (1993) Accurate 3D capacitance evaluation in integrated capacitive humidity sensors. Sen Mater 4:323–323
Kumar L, Saha D, Khan SA, Sengupta K, Islam T (2012) A medium-range hygrometer using nano-porous thin film of gamma-Al2O3 with electronics phase detection. IEEE Sensors J 12(5):1625–1632. https://doi.org/10.1016/j.snb.2007.06.024
Landau L, Levich B (1988) Dragging of a liquid by a moving plate. In: Dynamics of curved fronts. Elsevier, pp 141–153. https://doi.org/10.1016/b978-0-08-092523-3.50016-2
Landgraf G (1999) Gold in decoration of glass and ceramics. In: Gold: progress in chemistry, biochemistry and technology, pp 143–171. https://doi.org/10.1021/ja995770t
Lee J-W, Won C-W, Chun B-S, Sohn HY (1993) Dip coating of alumina films by the sol-gel method. J Mater Res 8(12):3151–3157. https://doi.org/10.1557/JMR.1993.3151
Li J, Liu Y, Tang M, Li J, Lin X (2012a) Capacitive humidity sensor with a coplanar electrode structure based on anodised porous alumina film. Micro Nano Lett 7(11):1097–1100. https://doi.org/10.1049/mnl.2012.0666
Li M, Li Y-T, Li D-W, Y-T L (2012b) Recent developments and applications of screen-printed electrodes in environmental assays—a review. Anal Chim Acta 734:31–44. https://doi.org/10.1016/j.aca.2012.05.018
Lu Y, Meyyappan M, Li J (2010) A carbon-nanotube-based sensor array for formaldehyde detection. Nanotechnology 22(5):055502. https://doi.org/10.1088/0957-4484/22/5/055502
Lv P, Tang ZA, Yu J, Zhang FT, Wei GF, Huang ZX, Hu Y (2008) Study on a micro-gas sensor with SnO2–NiO sensitive film for indoor formaldehyde detection. Sensors Actuators B Chem 132(1):74–80. https://doi.org/10.1016/j.snb.2008.01.018
Mohammad A, Karim MR, Khan ME, Khan MM, Cho MH (2019a) Biofilm-assisted fabrication of Ag@ SnO2-g-C3N4 nanostructures for visible light-induced Photocatalysis and photoelectrochemical performance. J Phys Chem C 123(34):20936–20948. https://doi.org/10.1021/acs.jpcc.9b05105
Mohammad A, Khan ME, Karim MR, Cho MH (2019b) Synergistically effective and highly visible light responsive SnO2-g-C3N4 nanostructures for improved photocatalytic and photoelectrochemical performance. Appl Surf Sci 495:143432. https://doi.org/10.1016/j.apsusc.2019.07.174
Nahar RK (2000) Study of the performance degradation of thin film aluminum oxide sensor at high humidity. Sensors Actuators B 63(1–2):49–54. https://doi.org/10.1016/S0925-4005(99)00511-0
Olding T, Sayer M, Barrow D (2001) Ceramic sol–gel composite coatings for electrical insulation. Thin Solid Films 398:581–586. https://doi.org/10.1016/S0040-6090(01)01322-0
Rittersma ZM (2002) Recent achievements in miniaturised humidity sensors—a review of transduction techniques. Sensors Actuators A Phys 96(2–3):196–210. https://doi.org/10.1016/S0924-4247(01)00788-9
Saha D, Mistry KK, Giri R, Guha A, Sensgupta K (2005) Dependence of moisture absorption property on sol–gel process of transparent nano-structured γ-Al2O3 ceramics. Sensors Actuators B Chem 109(2):363–366. https://doi.org/10.1016/j.snb.2005.01.002
Saha D, Das S, Sengupta K (2008) Development of commercial nanoporous trace moisture sensor following sol–gel thin film technique. Sensors Actuators B 128(2):383–387. https://doi.org/10.1016/j.snb.2007.06.024
Schmidt H, Mennig MJSc (2000). http://www.solgel.com/articles/nov00/mennig.htm. Wet coating technologies for glass
Schwartz RW, Schneller T, Waser R (2004) Chemical solution deposition of electronic oxide films. C R Chim 7(5):433–461. https://doi.org/10.1016/j.crci.2004.01.007
Seshan K, Schepis D (2018) Handbook of thin film deposition. William Andrew, Cambridge, MA. https://doi.org/10.1016/C2016-0-03243-6
Shamala K, Murthy L, Radhakrishna M, Rao KN (2007) Characterization of Al2O3 thin films prepared by spray pyrolysis method for humidity sensor. Sensors Actuators A Phys 135(2):552–557. https://doi.org/10.1016/j.sna.2006.10.004
Shugar GJ, Ballinger JT, Dawkins LM (1996) Chemical technicians’ ready reference handbook. McGraw-Hill, New York
Thornton JA, Greene J, Bunshah R (1994) Handbook of deposition technologies for films and coatings. Noyes, Park Ridge. https://doi.org/10.1016/B978-0-8155-2031-3.00001-6
Traversa E (1995) Ceramic sensors for humidity detection: the state-of-the-art and future developments. Sensors Actuators B Chem 23(2–3):135–156. https://doi.org/10.1016/0925-4005(94)01268-m
Wang J, Zou B, Ruan S, Zhao J, Wu F (2009) Synthesis, characterization, and gas-sensing property for HCHO of Ag-doped In2O3 nanocrystalline powders. Mater Chem Phys 117(2–3):489–493. https://doi.org/10.1016/j.matchemphys.2009.06.045
Weihs T, Je DG, Shah SI (1998) Handbook of thin film process technology. Institute of Physics, Bristol, p 7
Wen Z, Tian-mo L (2010) Hydrogen sensing characteristics and mechanism of nanosize TiO2 dope with metallic ions. Phys B Phys Condens Matter 405(2):564–568. https://doi.org/10.1016/j.physb.2009.09.066
Yoldas BE (1975a) A transparent porous alumina. Ceram Bull 54:289–290
Yoldas BE (1975b) Alumina gels that form porous transparent Al2O3. J Mater Sci 10(11):1856–1860. https://doi.org/10.1007/BF00754473
Acknowledgment
Anwar Ulla Khan and Mohammad Ehtisham Khan is indebted to the Deanship Research Program of Jazan University, Kingdom of Saudi Arabia, Lokesh Kumar is grateful to the department of Physics and Astrophysics, University of Delhi, North Campus, India, and Tarikul Islam is grateful to the department of Electrical Engineering, Jamia Millia Islamia, India.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 The Editor(s) (if applicable) and The Author(s), under exclusive license to Springer Nature Switzerland AG
About this chapter
Cite this chapter
Khan, A.U., Kumar, L., Islam, T., Khan, M.E. (2021). Fabrication of Nanostructured Metal Oxide Thin Film Capacitive Humidity Sensor. In: Rajendran, S., Qin, J., Gracia, F., Lichtfouse, E. (eds) Metal and Metal Oxides for Energy and Electronics. Environmental Chemistry for a Sustainable World, vol 55. Springer, Cham. https://doi.org/10.1007/978-3-030-53065-5_10
Download citation
DOI: https://doi.org/10.1007/978-3-030-53065-5_10
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-53064-8
Online ISBN: 978-3-030-53065-5
eBook Packages: Earth and Environmental ScienceEarth and Environmental Science (R0)