Abstract
Automotive transmissions are fundamental components in modern vehicles. They are required to make the engine operating at the most efficient conditions for providing the necessary torque at the wheels and minimising the fuel consumptions. Moreover, transmissions should be able to smooth or to filter out power source torque oscillations that can appear in the driveline. For achieving such objectives, the automotive industry has looked at different technological solutions. The introduction of electronically controlled transmissions contributed to augment the possibilities of new solutions that would not have been implementable without the flexibility and the performance of electronic control. Thus, recent technological developments of automotive transmissions gave the opportunity to engineers and control scientists for investigating challenging control problems with daily life practical applications.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
Notes
- 1.
Sometimes it is used the term driveline to denote the powertrain excluding the engine and the transmission.
- 2.
In British English it is used also the term propeller shaft when dealing with a rear-wheel-driven vehicle.
Bibliography
Chaudhuri A, Wereley N (2012) Compact hybrid electrohydraulic actuators using smart materials: a review. J Intell Mater Syst Struct 23(6):597–634
Della Gatta A, Iannelli L, Pisaturo M, Senatore A, Vasca F (2018) A survey on modeling and engagement control for automotive dry clutch. Mechatronics 55:63–75
Deur J, Petric J, Asgari J, Hrovat D (2006) Recent advances in control-oriented modeling of automotive power train dynamics. IEEE/ASME Trans Mechatron 11(5):513–523
Fischer R, Küçükay F, Jürgens G, Najork R, Pollak B (2015) The automotive transmission book. Springer International Publishing, Cham
Fleming WJ (2008) New automotive sensors—a review. IEEE Sens J 8(11):1900–1921
Garofalo F, Glielmo L, Iannelli L, Vasca F (2002) Optimal tracking for automotive dry clutch engagement. In: 15th IFAC World Congress, pp 367–372
Ghasemi M, Song X (2019) Powertrain energy management for autonomous hybrid electric vehicles with flexible driveline power demand. IEEE Trans Control Syst Technol 27(5):2229–2236
Glielmo L, Iannelli L, Vacca V, Vasca F (2006) Gearshift control for automated manual transmissions. IEEE/ASME Trans Mechatron 11(1):17–26
Goebel R, Sanfelice RG, Teel AR (2009) Hybrid dynamical systems. IEEE Control Syst Mag 29(2):28–93
Goetz M, Levesley M, Crolla D (2005) Dynamics and control of gearshifts on twin-clutch transmissions. Proc Inst Mech Eng Part D J Automob Eng 219(8):951–963
Haj-Fraj A, Pfeiffer F (2001) Optimal control of gear shift operations in automatic transmissions. J Frankl Inst 338:371–390
Hrovat D, Powers W (1988) Computer control systems for automotive power trains. IEEE Control Syst Mag 8(4):3–10
Hrovat D, Jankovic M, Kolmanovsky I, Magner S, Yanakiev D (2010) Powertrain control. In: The control handbook, vol 2. Control applications, 2nd edn. CRC Press, Boca Raton
Kiencke U, Nielsen L (2005) Automotive control systems. For engine, driveline, and vehicle. Springer, Berlin/Heidelberg
Kim D, Peng H, Bai S, Maguire JM (2007) Control of integrated powertrain with electronic throttle and automatic transmission. IEEE Trans Control Syst Technol 15(3):474–482
Kim D, Kim J, Choi S (2020) Design and modeling of energy efficient dual clutch transmission with ball-ramp self-energizing mechanism. IEEE Trans Veh Technol 69(3):2525–2536
Klimartin B (2003) Magnetoelastic torque sensor utilizing a thermal sprayed sense-element for automotive transmission applications. SAE Technical Paper 2003-01-0711
Kulkarni M, Shim T, Zhang Y (2007) Shift dynamics and control of dual-clutch transmissions. Mech Mach Theory 42(2):168–182
Lucente G, Montanari M, Rossi C (2007) Modelling of an automated manual transmission system. Mechatronics 17(2–3):73–91
Munhoz D, Gregolin J, de Faria L, de Andrade T (2007) Automotive materials: current status, technology trends and challenges. SAE Technical Paper 2007-01- 2671
Pettersson M, Nielsen L (2000) Gear shifting by engine control. IEEE Trans Control Syst Technol 8(3):495–507
Pietron G, Fujii Y, Kucharski J, Yanakiev D, Kapas N, Hermann S, Hogirala R, Green T (2013) Development of magneto-elastic torque sensor for automatic transmission applications. SAE Int J Passengers Cars Mech Syst 6(2):529–534
Senatore A (2009) Advances in the automotive systems: an overview of dual-clutch transmissions. Recent Patents Mech Eng 2(2):93–101
Song X, Zulkefli MAM, Sun Z (2010) Automotive transmission clutch fill optimal control: an experimental investigation. In: 2010 American Control Conference. IEEE, pp 2748–2753
Sun Z, Hebbale K (2005) Challenges and opportunities in automotive transmission control. In: Proceedings of the American Control Conference, pp 3284–3289
Vasca F, Iannelli L, Senatore A, Reale G (2011) Torque transmissibility assessment for automotive dry-clutch engagement. IEEE/ASME Trans Mechatron 16(3):564–573
Zhang Y, Mi C (2018) Automotive power transmission systems. Wiley, Hoboken
Zhang H, Du H, Sun S, Li W, Wang Y (2019) Design and analysis of a novel magnetorheological fluid dual clutch for electric vehicle transmission. In: Automotive Technical Papers, SAE International
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2021 Springer Nature Switzerland AG
About this entry
Cite this entry
Iannelli, L. (2021). Transmissions. In: Baillieul, J., Samad, T. (eds) Encyclopedia of Systems and Control. Springer, Cham. https://doi.org/10.1007/978-3-030-44184-5_76
Download citation
DOI: https://doi.org/10.1007/978-3-030-44184-5_76
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-44183-8
Online ISBN: 978-3-030-44184-5
eBook Packages: Intelligent Technologies and RoboticsReference Module Computer Science and Engineering