Abstract
The article presents general recommendations for the calculation of steel tanks for gas and petroleum products storage. The analysis of the existing structural forms of tanks is carried out and their classification is provided. The paper analyzes the main types and features of tanks. Optimal dimensions and parameters of steel tanks are given. The article presents coefficients of working conditions for the calculation of vertical cylindrical tanks elements. The article details calculation of the tank wall and negative tolerances on the thickness of the steel sheet. The stress–strain state of the tanks is estimated according to the theory of shell calculation. This assessment takes into account only the ring and meridional stresses, operational snow and wind loads, temperature and aggressive effects. Negative trends of reducing the indicators of bearing capacity, operational reliability and durability of steel tanks were revealed. A variant of calculated diagram of the fluid pressure on the tank wall is presented. Calculation proposals based on the experience of designing steel tanks are formed. An example of calculation of a steel vertical tank is considered. The formula of calculation of the tank wall belt from condition of strength provision (according to the first group of limit states) is presented. The formula for checking the stresses in the lower zone of the tank wall taking into account the action of the boundary moment is also obtained.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
RafiqulIslam, M. (2014). Unconventional gas reservoirs. Chapter 6—Scientific characterization of unconventional gas reservoirs (pp. 337–485). Copyright, Elsevier. https://doi.org/10.1016/B978-0-12-800390-9.00006-2.
Chang, J., & Cheng-Chung, L. (2006). A study of storage tank accidents (Internet). Journal of Loss Prevention in the Process Industries, 19(1), 51–59. https://doi.org/10.1016/j.jlp.2005.05.015.
Jing, W., Wang, J., & Cheng, X. (2019). Dynamic responses of oil storage tank considering wind interference effect. Engineering Failure Analysis, 104, 1053–1063. https://doi.org/10.1016/j.engfailanal.2019.06.040.
Hu, W. Bohra, H., Azzuni, E., & Guzey, S. (2019). The uplift effect of bottom plate of aboveground storage tanks subjected to wind loading. Thin-Walled Structures, 144. https://doi.org/10.1016/j.tws.2019.106241.
Kletz, T., Amyotte, P. (2014). What went wrong? Chapter 11—Storage tanks (pp. 210–234). Copyright, Elsevier. https://doi.org/10.1016/B978-0-12-810539-9.00011-2.
Bernier, C., & Padgett, J. E. (2019). Buckling of aboveground storage tanks subjected to storm surge and wave loads. Engineering Structures, 197. https://doi.org/10.1016/j.engstruct.2019.109388.
Zhang, M., Lv, H., Kang, H., Zhou, W., & Zhang, C. A. (2019). Literature review of failure prediction and analysis methods for composite high-pressure hydrogen storage tanks. International Journal of Hydrogen Energy. https://doi.org/10.1016/j.ijhydene.2019.08.001.
Ovidi, F., Pagni, E., & Landucci, G. (2019). Numerical study of pressure build-up in vertical tanks for cryogenic flammables storage. Applied Thermal Engineering, 161. https://doi.org/10.1016/j.applthermaleng.2019.114079.
Barker, G. (2019). The Engineer’s guide to plant layout and piping design for the oil and gas industries. Chapter 15—Storage tanks (pp. 361–379). Copyright, Elsevier. https://doi.org/10.1016/B978-0-12-814653-8.00015-1
Zusman, M., Dubnov, J., Barchana, M., & Portnov, B. A. (2012). Residential proximity to petroleum storage tanks and associated cancer risks: Double Kernel Density approach vs. zonal estimates. Science of The Total Environment, 441, 265–276. https://doi.org/10.1016/j.scitotenv.2012.09.054.
Piskunov, V. G., Goryk, A. V., Lyakhov, A. L., & Cherednikov, V. N. (2000). High-order model of the stress-strain state of composite bars and its implementation by computer algebra. Composite Structures, 48(1), 169–176. https://doi.org/10.1016/S0263-8223(99)00091-4.
Piskunov, V. G., Goryk, A. V., & Cherednikov, V. N. (2000). Modeling of transverse shears of piecewise homogeneous composite bars using an iterative process with account of tangential loads. 1. Construction of a model. Mechanics of Composite Materials, 36(4), 287–296. https://doi.org/10.1007/bf02262807
Chichulin, V., & Chichulina, K. (2017). Deriving a function of the bending axis of a profiled wall in the form of orthotropic plate. Eastern-European Journal of Enterprise Technologies, 5(7–89), 30–37. https://doi.org/10.15587/1729-4061.2017.109687.
DBN V.2.6-163:2014. (2014). Construction of buildings and structures. Steel structure. Standards of design, manufacture and installation. Kyiv, 196.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Chichulina, K., Chichulin, V. (2020). Proposals Design of Steel Storage Tanks for Gas and Oil Products. In: Onyshchenko, V., Mammadova, G., Sivitska, S., Gasimov, A. (eds) Proceedings of the 2nd International Conference on Building Innovations. ICBI 2019. Lecture Notes in Civil Engineering, vol 73. Springer, Cham. https://doi.org/10.1007/978-3-030-42939-3_2
Download citation
DOI: https://doi.org/10.1007/978-3-030-42939-3_2
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-42938-6
Online ISBN: 978-3-030-42939-3
eBook Packages: EngineeringEngineering (R0)