Abstract
Computer-based models and simulations are critical to the design, development, and optimization of smart manufacturing systems required for Industry 4.0. Modeling and Simulation technologies are essential to address the challenges in the adoption of Industry 4.0 today, such as the creation of smart manufacturing systems. Recently many researchers have contributed to modeling and simulation of smart factories in Industry 4.0, also known as Factory 4.0. This paper presents a systematic literature review of recent developments in modeling, simulation, and optimization of Smart Factories. It indicates the most frequent contexts, problems, methods, tools, related to simulation and optimization of smart factories. This paper fills this gap by identifying and analyzing research on simulation of smart factories.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Alcácer V, Cruz-Machado V (2019) Scanning the industry 4.0: a literature review on technologies for manufacturing systems. Eng Sci Technol Int J. https://doi.org/10.1016/j.jestch.2019.01.006
Blanchet M, Rinn T, Von Thaden G, De Thieulloy G (2014) Industry 4.0. Roland Berger strategy consultants GMBH, pp 1–37, March. https://doi.org/10.4018/978-1-5225-3996-4.ch001
Cabasino MP, Giua A, Pocci M, Seatzu C (2011) Discrete event diagnosis using labeled Petri nets. An application to manufacturing systems. Control Eng Pract 19(9):989–1001. https://doi.org/10.1016/j.conengprac.2010.12.010
Choi BW (1994) Petri net approaches for modeling, controlling, and validating flexible manufacturing systems
Creighton D, Nahavandi S (2003) Application of discrete event simulation for robust system design of a melt facility. Robot Comput Integr Manuf 19(6):469–477. https://doi.org/10.1016/S0736-5845(03)00057-7
Defense Modeling and Simulation Coordination Office (DMSCO) (2013) Model US DOD Glossary. https://www.msco.mil/MSReferences/Glossary/MSGlossary.aspx
Dehghanimohammadabadi M, Keyser T (2015). Iterative simulation-optimization of a multi-state manufacturing system. In: Spring simulation multi-conference, pp 687–688
Dunke F, Nickel S (2015) Simulation-based optimisation in industry 4.0 Simulationsbasierte Optimierung für die Industrie 4.0. Simulation in production and logistics
Edakara SD (2013) A novel methodology to investigate the performance of production line systems using an integrated product service system approach. The University of Manchester. https://www.escholar.manchester.ac.uk/uk-ac-man-scw:208072
Gebus S, Martin O, Soulas A, Juuso E (2004) Production optimization on PCB assembly lines using discrete-event simulation
Gilchrist A (2016) Smart factories. In: Industry 4.0. Springer, Berkeley, pp 217–230
Haag S, Anderl R (2018) Digital twin – proof of concept. Manuf Lett 15:64–66. https://doi.org/10.1016/j.mfglet.2018.02.006
Hofmann E, Rüsch M (2017) Industry 4.0 and the current status as well as future prospects on logistics. Comput Ind 89:23–34. https://doi.org/10.1016/j.compind.2017.04.002
Kahloul L, Bourekkache S, Djouani K (2016) Designing reconfigurable manufacturing systems using reconfigurable object Petri nets. Int J Comput Integr Manuf 29(8):889–906. https://doi.org/10.1080/0951192X.2015.1130262
Kousi N, Koukas S, Michalos G, Makris S (2018) Scheduling of smart intra – factory material supply operations using mobile robots. Int J Prod Res 7543:1–14. https://doi.org/10.1080/00207543.2018.1483587
Kranz R, Zupick N (2017). Arena and industry 4.0. In: 2017 Winter simulation conference (WSC). IEEE, p 4450
Lachenmaier JF, Lasi H, Kemper HG (2017) Simulation of production processes involving cyber-physical systems. Procedia CIRP 62:577–582. https://doi.org/10.1016/j.procir.2016.06.074
Long F, Zeiler P, Bertsche B (2016) Modelling the production systems in industry 4.0 and their availability with high-level Petri nets. IFAC-PapersOnLine 49(12):145–150. https://doi.org/10.1016/j.ifacol.2016.07.565
Longo F, Nicoletti L, Padovano A (2019) Ubiquitous knowledge empowers the smart factory: the impacts of a service-oriented digital twin on enterprises’ performance. Ann Rev Control. https://doi.org/10.1016/j.arcontrol.2019.01.001
Mendes JM, Leitão P, Restivo F, Colombo AW (2010) Composition of Petri nets models in service oriented industrial automation. In: IEEE international conference on industrial informatics (INDIN), pp 578–583. https://doi.org/10.1109/INDIN.2010.5549677
Mourtzis D, Doukas M, Bernidaki D (2014a) Simulation in manufacturing: review and challenges. Procedia CIRP 25(C):213–229. https://doi.org/10.1016/j.procir.2014.10.032
Mourtzis D, Doukas M, Bernidaki D (2014b) Simulation in manufacturing: review and challenges. Procedia CIRP 25(C):213–229. https://doi.org/10.1016/j.procir.2014.10.032
Nagadi K, Rabelo L, Basingab M, Sarmiento AT, Jones A, Rahal A (2018) A hybrid simulation-based assessment framework of smart manufacturing systems. Int J Comput Integr Manuf 31(2):115–128. https://doi.org/10.1080/0951192X.2017.1407449
Negahban A, Smith JS (2014) Simulation for manufacturing system design and operation: literature review and analysis. J Manuf Syst 33(2):241–261. https://doi.org/10.1016/j.jmsy.2013.12.007
Petri CA (1962) Kommunikation mit Automaten (Communication with Automats) (University of Bonn). urn:nbn:de:gbv:18-228-7-1557
Pozsgai P (2006) Realitätsnahe Modellierung und Analyse der operativen Zuverlässigkeitskennwerte technischer Systeme (Close-to-reality modelling and analysis of the operational reliability characteristics of technical systems). Universität Stuttgart, vol 16. Holzgartenstr
Pozsgai P, Bertsche B (2004) Conjoint modelling with extended coloured stochastic petri net and reliability block diagram for system analysis. In: Probabilistic safety assessment and management, pp 1382–1387. https://doi.org/10.1007/978-0-85729-410-4_223
Qi Q, Tao F, Zuo Y, Zhao D (2018) Digital twin service towards smart manufacturing. Procedia CIRP 72:237–242. https://doi.org/10.1016/j.procir.2018.03.103
Qin J, Liu Y, Grosvenor R (2016) A categorical framework of manufacturing for industry 4.0 and beyond. Procedia CIRP 52:173–178. https://doi.org/10.1016/j.procir.2016.08.005
Radziwon A, Bilberg A, Bogers M, Madsen ES (2014) The smart factory: exploring adaptive and flexible manufacturing solutions. Procedia Eng 69:1184–1190. https://doi.org/10.1016/j.proeng.2014.03.108
Rodič B (2017) Industry 4.0 and the new simulation modelling paradigm. Organizacija 50(3):193–207. https://doi.org/10.1515/orga-2017-0017
Roland Berger (2017) A design modification of the delivery valve and the constant pressure valve in a medium speed diesel engine fuel injection system for the prevention of cavitation damage and secondary injection. https://doi.org/10.1115/IMECE2005-80730
Shao G, Shin SJ, Jain S (2015) Data analytics using simulation for smart manufacturing. In: Proceedings - winter simulation conference, (SMLC 2012), January 2015, pp 2192–2203. https://doi.org/10.1109/WSC.2014.7020063
Singh A (2016) Discrete event simulation of assembly lines. University of Kaiserslautern
Smart Plants AS (2018) Smart plants. https://smartplants.io. Accessed 24 Apr 2019
Smith JS, Wysk RA, Sturrock DT, Ramaswamy SE, Smith GD, Joshi SB (1994) Discrete event simulation for shop floor control. In: Proceedings of winter simulation conference. IEEE, pp 962–969
Tao F, Cheng J, Qi Q, Zhang M, Zhang H, Sui F (2018) Digital twin-driven product design, manufacturing and service with big data. Int J Adv Manuf Technol 94(9–12):3563–3576. https://doi.org/10.1007/s00170-017-0233-1
Trigueiro de Sousa Junior W, Barra Montevechi JA, de Carvalho Miranda R, Teberga Campos A (2019) Discrete simulation-based optimization methods for industrial engineering problems: a systematic literature review. Comput Ind Eng 128:526–540. https://doi.org/10.1016/j.cie.2018.12.073
Wagner T, Herrmann C, Thiede S (2017) Industry 4.0 impacts on lean production systems. Procedia CIRP 63:125–131. https://doi.org/10.1016/j.procir.2017.02.041
Wang S, Wan J, Li D, Zhang C (2016) Implementing smart factory of industrie 4.0: an outlook. Int J Distrib Sens Netw. https://doi.org/10.1155/2016/3159805
Yesilyurt M, Nasser F (2013) Discrete event modelling and a simulation of an assembly process at GKN driveline Köping AB. Malardalen University
Zeiler P, Bertsche B (2014) Availability modelling and analysis of an offshore wind turbine using extended coloured stochastic petri nets. In: Safety and reliability: methodology and applications. CRC Press, pp 1193–1202
Zhang Y, Wang W, Wu N, Qian C (2016) IoT-enabled real-time production performance analysis and exception diagnosis model. IEEE Trans Autom Sci Eng 13(3):1318–1332. https://doi.org/10.1109/TASE.2015.2497800
Zúñiga ER, Moris MU, Syberfeldt A (2017) Integrating simulation-based optimization, lean, and the concepts of industry 4.0. In: 2017 winter simulation conference (WSC). IEEE, pp 3828–3839
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Cinar, Z.M., Zeeshan, Q., Solyali, D., Korhan, O. (2020). Simulation of Factory 4.0: A Review. In: Calisir, F., Korhan, O. (eds) Industrial Engineering in the Digital Disruption Era. GJCIE 2019. Lecture Notes in Management and Industrial Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-42416-9_19
Download citation
DOI: https://doi.org/10.1007/978-3-030-42416-9_19
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-42415-2
Online ISBN: 978-3-030-42416-9
eBook Packages: EngineeringEngineering (R0)