Abstract
The article provides theoretical estimates of the accuracy of determining the geometric parameters of objects in digital images. The geometric parameter error estimates take into account a digital video conversion with measurement information about the geometric parameters. This transformation takes place in the process of imaging by a digital video camera, which is a part of the measurement of mechanical quantities. Therefore, the article considers the measurement errors caused by the quantization of video signal level and sampling, and their statistical characteristics. The results can be used to calculate geometrical measurement errors and measurements of object motion parameters, as well as to formulate requirements for hardware and software for processing experimental data.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Kochan, R., Kochan, O., Sachenko, A., Kochan, V.: Increasing metrological reliability of measuring channels for distributed automated control systems. In: Proceedings of 2019 10th International Conference on Dependable Systems, Services and Technologies, DESSERT 2019, pp. 34–40 (2019). https://doi.org/10.1109/DESSERT.2019.8770052. Article no. 8770052
Shams-Nateri, A., Hasanlou, E.: Computer vision techniques for measuring and demonstrating color of textile. Appl. Comput. Vis. Fashion Textile, 189–220 (2018). https://doi.org/10.1016/b978-0-08-101217-8.00008-7
Korobiichuk, I., Podchashinskiy, Yu., Shapovalova, O., Shadura, V., Nowicki, M., Szewczyk, R.: Precision increase in automated digital image measurement systems of geometric values. In: Advances in Intelligent Systems and Computing Book Series (AISC), vol. 393, pp. 335–340. Springer (2016). https://doi.org/10.1007/978-3-319-23923-1_51
Korobiichuk, I., Podchashinskiy, Yu., Elnikova, T., Jus, A.: Geometrical parameter measurement and phytoplankton process modeling based on video images of water samples from reservoirs. Meas. J. Int. Meas. Confed. 114, 226–232 (2018). https://doi.org/10.1016/j.measurement.2017.09.048
Korobiichuk, I., Podchashinskiy, Yu., Lugovyh, O., Nowicki, M., Kachniarz, M.: Algorithmic compensation of video image dynamic errors with measurement data about geometric and object motion parameters. Measurement 105, 66–71 (2017). https://doi.org/10.1016/j.measurement.2017.04.009
Korobiichuk, I., Podchashinskiy, Yu., Bezvesilna, O., Nechay, S., Shavurskiy Yu.: Three-coordinate gravimeter with exhibition of axis sensitivity based on digital videoimages. In: ICIGP 2019: Proceedings of 2nd International Conference on Image and Graphics Processing, pp. 89–93 (2019). https://doi.org/10.1145/3313950.3314187
Measurements in LabVIEW. Application Guide. Training Center “Technology Center National Instruments”. NSTU, Novosibirsk (2006). 360 p.
Parente, F.R., Santonico, M., Zompanti, A., Benassai, M., Ferri, G., D’Amico, A., Pennazza, G.: An electronic system for the contactless reading of ECG signals. Sensors 17(11) (2017). https://doi.org/10.3390/s17112474. Article no. 2474
Korobiichuk, I., Lysenko, V., Opryshko, O., Komarchyk, D., Pasichnyk, N., Juś, A.: Crop monitoring for nitrogen nutrition level by digital camera. In: Advances in Intelligent Systems and Computing, vol. 743, pp. 595–603 (2018). https://doi.org/10.1007/978-3-319-77179-3_56
Podchashinsky, Yu.O., Lugovikh, O.O., Shavursky, Yu.O.: Measurement of motion of objects based on computerized video processing. ZHDTU, Zhytomyr (2018). 192 p.
Levin, B.R.: Theoretical Foundations of Statistical Radio Engineering, 3rd edn., Revised and add. Radio and Communications, Moscow (1989). 656 p.
Barclay, L.: Fading and statistics. In: Propagation of Radiowaves, 3rd edn., pp. 45–59 (2012). https://doi.org/10.1049/pbew056e_ch4
Frenzel Jr., L.E.: Electronics Explained: Fundamentals for Engineers, Technicians, and Makers, 2nd edn., pp. 1–378. Newnes, San Diego (2017)
Bryukhanov, Yu.A.: A method of analysis of periodic processes in nonautonomous discrete-time systems with quantization. J. Commun. Technol. Electron. 53(7), 807–813 (2008). https://doi.org/10.1134/S1064226908070115
Lebedev, A.I.: Physics of Semiconductor Devices. Fizmatlit, Moscow (2008). 488 p.
Buckingham, M.: Noises in Electronic Devices and Systems. Mir, Moscow (1986). 399 p.
Grabar, I., Kolodnitska, R., Podchashinsky, Yu.: Hardware-software complex for research of kinetics of elastic - plastic deformations and destructions of rigid bodies. In: Proceedings of the International Scientific Conference “Mechanics 2000”, pp. 103–108 (2000)
Keränen, P., Jansson, J.-P., Mäntyniemi, A., Kostamovaara, J.: Design principles for accurate, long-range interpolating time-to-digital converters. In: CMOS Time-Mode Circuits and Systems: Fundamentals and Applications, pp. 141–176 (2015). https://doi.org/10.1201/b19228
Sarwin, A.A.: Systems of non-contact measurements of geometric parameters. University Press of Leningrad, Leningrad (1983). 144 p.
Vinogradov, N.A., Yakovlev, V.N., Voskresensky, V.V., et al.: Handbook of Digital Information Processing Devices. Tekhnika, Kyiv (1988). 415 p.
Suh, Y.-W., Kim, S.-H., Kim, M.-S., Choi, J.-Y., Seo, J.-S.: A novel integrated measurement and analysis system for digital broadcasting. IEEE Trans. Consum. Electron. 55(1), 56–62 (2009). https://doi.org/10.1109/TCE.2009.4814414
Shishigin, I.V., Shulman, M.G., Kolesnichenko, O.V., Zolotarev, S.A.: How to Choose a Video Camera. Lan, St. Petersburg (1996). 512 p.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Korobiichuk, I., Podchashinskiy, Y., Luhovykh, O., Levkivskyi, V., Rzeplińska-Rykała, K. (2020). Theoretical Estimates of the Accuracy of Determination of Geometric Parameters of Objects on Digital Images. In: Szewczyk, R., Zieliński, C., Kaliczyńska, M. (eds) Automation 2020: Towards Industry of the Future. AUTOMATION 2020. Advances in Intelligent Systems and Computing, vol 1140. Springer, Cham. https://doi.org/10.1007/978-3-030-40971-5_27
Download citation
DOI: https://doi.org/10.1007/978-3-030-40971-5_27
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-40970-8
Online ISBN: 978-3-030-40971-5
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)