Abstract
Most tyre models used in vehicle dynamics simulations are parameterised with data obtained on a flat-track test rig, where the tyre is commonly driven on sandpaper. The resultant models are typically very accurate at low to medium slip conditions. At high slip, the prediction of forces and moments of a tyre rolling on surfaces other than sandpaper is less reliable as this condition is dominated by the rubber-road friction characteristics. To extend the validity of tyre models derived from sandpaper surface measurements to road surfaces, this paper explores the use of frictional behaviour of tread rubber obtained with a purpose-built rubber friction measurement system. Since rubber friction depends on many variables, tests have been carried out under controlled conditions in order to obtain accurate and repeatable data. Friction measurements were performed on sandpaper and incorporated into a brush-type tyre model to recreate the flat-track measurements of the full tyre. Preliminary results indicate the benefits and potential of detailed knowledge on the frictional behaviour for accurately modelling tyre forces and moments.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Albinsson, A., Bruzelius, F., Jacobson, B., Bakker, E.: Evaluation of vehicle-based tyre testing methods. Proc. IMechE, Part D 223(1), 4–17 (2018)
Prins, J.: The approach to tyre modelling to support ride and handling development in Jaguar Land Rover. In: Vehicle Ride and Handling: Specialist Engineering for an Improved Experience. IMechE, Birmingham (2017)
Hüsemann, T.C.: Adaption von Labor-Reifenkennfeldern an reale Fahrbahnoberflächen. Aachen, Techn. Hochsch., Diss. (2011)
Albinsson, A., Bruzelius, F., Ran, S.: Scaling tire models to different road surfaces using an external IMU and K&C measurements. In: AVEC 2018, Beijing (2018)
Grosch, K.A.: The relation between the friction and visco-elastic properties of rubber. Proc. R. Soc. Lond. A 274, 21–39 (1963)
Smith, G., Blundell, M.: A new efficient free-rolling tyre-testing procedure for the parameterisation of vehicle dynamics tyre models. Proc. Inst. Mech. Eng. Part D: J. Automob. Eng. 231(10), 1435–1448 (2017)
Tiwari, A., Dorogin, L., Steenwyk, B., Warhadpande, A., Motamedi, M., Fortunato, G., Ciaravola, V., Persson, B.N.J.: Rubber friction directional asymmetry, 116, 66002 (2016)
Persson, B.N.J.: Rubber friction: role of the flash temperature. J. Phys.: Condens. Matter 18(32), 7789–7823 (2006)
Williams, M.L., Landel, R.F., Ferry, J.D.: The temperature dependence of relaxation mechanisms in amorphous polymers and other glass-forming liquids. J. Am. Chem. Soc. 77(14), 3701–3707 (1955)
Gent, A.N., Walter, J.D.: The Pneumatic Tire. National Highway Traffic Safety Administration, Washington (2005)
Pacejka, H.B.: Tire and Vehicle Dynamics, 3rd edn. Butterworth-Heinemann, Oxford (2012)
Riehm, P., Unrau, H.-J., Gauterin, F., Torbrügge, S., Wies, B.: 3D brush model to predict longitudinal tyre characteristics. Veh. Syst. Dyn. 57(1), 17–43 (2018)
Jacobson, B.: Vehicle Dynamics Compendium. Chalmers University of Technology, Göteborg (2018)
Grosch, K.A.: Goodyear medalist lecture. Rubber friction and its relation to tire traction. Rubber Chem. Technol. 80(3), 379–411 (2007)
Kobayashi, T., Katsuyama, E., Sugiura, H., Hattori, Y., Ono, E., Yamamoto, M.: Theoretical analysis of tyre slip power dissipation mechanism using brush model. Veh. Syst. Dyn. 1–15 (2019)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
O’Neill, A., Gruber, P., Watts, J.F., Prins, J. (2020). Predicting Tyre Behaviour on Different Road Surfaces. In: Klomp, M., Bruzelius, F., Nielsen, J., Hillemyr, A. (eds) Advances in Dynamics of Vehicles on Roads and Tracks. IAVSD 2019. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-38077-9_215
Download citation
DOI: https://doi.org/10.1007/978-3-030-38077-9_215
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-38076-2
Online ISBN: 978-3-030-38077-9
eBook Packages: EngineeringEngineering (R0)