Abstract
We discuss the research that is being carried out at the Department of Civil and Building Engineering and Architecture (Dipartimento di Ingegneria Civile, Edile e Architettura, DICEA) of the Università Politecnica delle Marche (UNIVPM). Over the years the DICEA has steadily focused its attention on resilient environments and buildings, making a growing know-how and skill available to the local and broad communities. Pivotal to this have been dedicated projects and funds, like the UNIVPM strategic projects and the MIUR Dipartimenti di Eccellenza award. In conjunction with the four companion papers, produced by researchers of the four divisions of DICEA, we illustrate the DICEA’s trajectory in the analysis of sustainable engineering for resilient built and natural environments.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Alderucci T, Terlizzi V, Urso S, Borsellino C, Munafò P (2018) Experimental study of the adhesive glass-steel joint behavior in a tensegrity floor. Int J Adhes Adhes 85:293–302
Alici A (2014) I progetti a scala urbana per Ancona. Guido Cirilli architetto dell’Accademia. In: Cassani AG, Zucconi G (eds) Il Poligrafo, Padova, pp 117–129
Alici A (2016) Italia Nostra e la tutela del patrimonio storico-artistico in Italia tra gli anni Cinquanta e Sessanta. La scoperta della città antica. Esperienza e conoscenza del centro storico nell’Europa del Novecento. In: Cutolo D, Pace S (eds), Quodlibet, Macerata, pp 243–257
Belluzzi F, Mondaini G (2017) Nuove Soglie. Spazi di riattivazione architettonica del patrimonio esistente. In: MONOGRAPH: RESEARCH 03. Resilient Ecological Design Strategies, LIST, Trento-Barcellona
Bernardini G, D’Orazio M, Quagliarini E (2016) Towards a “behavioural design” approach for seismic risk reduction strategies of buildings and their environment. Saf Sci 86:273–294
Bernardini G, Postacchini M, Quagliarini E, Brocchini M, Cianca C, D’Orazio M (2017) A preliminary combined simulation tool for the risk assessment of pedestrians’ flood-induced evacuation. Environ Modell Softw 96:14–29
Bocci E, Riderelli L, Fava G, Bocci M (2016) Durability of NO oxidation effectiveness of pavement surfaces treated with photocatalytic titanium dioxide. Arab J Sci Eng 41(12):4827–4833
Bonvini P (2013) Cancellazioni involontarie e riscritture consapevoli: le infrastrutture come possibili generatrici di nuove matrici identitarie. In: Bonvini P, Cantalini S, Mondaini G (eds) Territori intermedi per nuovi organismi urbani, SOGLIE, Aracne Editrice, Roma, pp 24–35
Bonvini P (2016) Quang Tri War Memorial. An architectural investigation. In: Pugnaloni F, Carlorosi C (eds) dMz & Military architecture. Levels for a landscape. Thành cô Quàng Tri Viêt Nam, 94–101, Il Lavoro Editoriale, Ancona
Brocchini M, Calantoni J, Postacchini M, Sheremet A, Staples T, Smith J, Reed AH, Braithwaite EF III, Lorenzoni C, Russo A, Corvaro S, Mancinelli A, Soldini L (2017) Comparison between the wintertime and summertime dynamics of the Misa River estuary. Marine Geol 385:27–40
Canestrari F, Ferrotti G, Lu X, Millien A, Partl MN, Petit C, Phelipot-Mardelé A, Piber H, Raab C (2013) Mechanical testing of interlayer bonding in asphalt pavements. In: Partl M et al (eds) Advances in interlaboratory testing and evaluation of bituminous materials. Springer, Dordrecht, pp 303–360
Canestrari F, Virgili A, Graziani A, Stimilli A (2015) Modeling and assessment of self-healing and thixotropy properties for modified binders. Int J Fatigue 70:351–360
Capozucca R, Ricci V (2016) Bond of GFRP strips on modern and historic brickwork masonry. Compos Struct 140:540–555
Capozucca R (2013) Effects of mortar layers in the delamination of GFRP bonded to historic ma-sonry. Compos Part B Eng 44:639–649
Carbonari A, Giretti A, Naticchia B (2014) Automation solutions supporting real-time safety and work progress management in construction. Proc CTM 2014:98–104
Carbonari A, Giretti A, Corneli, A, Villa V, Di Giuda, G (2017) Decision support tool for multi-criteria analyses of the quality of large building stock. In: Proceedings of international symposium on automation and robotics in construction (ISARC), vol 3, Vilnius Gediminas Technical University, Department of Construction Economics & Property
Carbonari S, Morici M, Dezi F et al (2017) Soil-structure interaction effects in single bridge piers founded on inclined pile groups. Soil Dyn Earthq Eng 92:52–67
Clementi F, Pierdicca A, Formisano A, Catinari F, Lenci S (2017) Numerical model upgrading of a historical masonry building damaged during the 2016 Italian earthquakes: the case study of the Podestà palace in Montelupone (Italy). J Civ Struct Heal Monit 7:703–717
Clementi F, Gazzani V, Poiani M, Mezzapelle PA, Lenci S (2018) Seismic assessment of a monumental building through nonlinear analyses of a 3D solid model. J Earthq Eng 22:35–61
Clini P, Quattrini R, Frontoni E, Nespeca R (2015) A new cloud library for integrated surveys: the ancient via Flaminia and the Nextone project. In: Brusaporci S (ed) Handbook of research on emerging digital tools for architectural surveying, modeling, and representation, pp 579–606
Daví F, Rinaldi D (2015) Mechanical and optical properties of anisotropic single-crystal prisms. J Elast 120:197–224
Di Giuseppe E, D’Orazio M (2015) Assessment of the effectiveness of cool and green roofs for the mitigation of the heat Island effect and for the improvement of thermal comfort in Nearly Zero Energy Building. Archit Sci Rev 58(2):134–143
Di Giuseppe E, Iannaccone M, Telloni M, D’Orazio M, Di Perna C (2017) Probabilistic life cycle costing of existing buildings retrofit interventions towards nZE target: methodology and application example. Energy Build 144:416–432
Ferretti M, Schröder J (2018) Patterns and scenarios for regiobranding. JOVIS, Berlin
Gaiani M, Apollonio FI, Clini P, Quattrini R (2016) A mono-instrumental approach to high-quality 3D reality-based semantic models: application on the PALLADIO library. In: 2015 Digital heritage. https://doi.org/10.1109/digitalheritage.2015.7419449
Gara F, Carbonari S, Leoni G, Dezi L (2014) A higher order steel–concrete composite beam model. Eng Struct 80:260–273
Gioiella L, Tubaldi E, Gara F et al (2018) Modal properties and seismic behaviour of buildings equipped with external dissipative pinned rocking braced frames. Eng Struct 172:807–819
Graziani A, Bocci M, Canestrari F (2014) Complex Poisson’s ratio of bituminous mixtures: measurement and modeling. Mater Struct 47(7):1131–1148
Graziani A, Godenzoni C, Cardone F, Bocci M (2016) Effect of curing on the physical and mechanical properties of cold-recycled bituminous mixtures. Mater Design 95:358–369
Isidori D, Concettoni E, Cristalli C, Soria L, Lenci S (2016) Proof of concept of the structural health monitoring of framed structures by a novel combined experimental and theoretical approach. Struct Contr Health Monit 23:802–824
Khromova A, Costa CS, Erjavec I Š, Pierdicca R. Maliverni E S, Galli A, Marcheggiani E (2016) Is the mediated public open space a smart place? Relationships between urban landscapes and ICT–The cost action TU 1306 CyberParks. SCIRES-IT-SCIentific Res Inf Technol 6(2):17–28
Lancioni G, Gentilucci D, Quagliarini E, Lenci S (2016) Seismic vulnerability of ancient stone arches through the non-smooth contact dynamics method. Eng Struct 119:110–121
Munafò P, Quagliarini E, Goffredo GB, Bondioli F, Licciulli A (2014) Durability of nano-engineered TiO2 self-cleaning treatments on limestone. Constr Build Mater 65:218–231
Naticchia B, Carbonari A, Giretti A (2011) A proactive system for real-time safety management in construction sites. Autom Constr 20:686–698
Naticchia B, Vaccarini M, Carbonari A (2013) A monitoring system for real-time interference control on large construction sites. Autom Constr 29:148–160
Pierdicca R, Frontoni E, Zingaretti P, Malinverni ES, Galli A, Marcheggiani E, Costa CS (2016) Cyberarchaeology: improved way findings for archaeological parks through mobile augmented reality. In: International conference on augmented reality, virtual reality and computer graphics. Springer International Publishing, pp 172–185
Pierdicca R, Frontoni E, Malinverni ES, Zingaretti P, Tassetti AN, Mancini A, Galli Marcheggiani E (2016) Smart maintenance of riverbanks using a standard data layer and augmented reality. Comput Geosci 95:67–74
Postacchini M, Brocchini M, Corvaro S, Lorenzoni C, Mancinelli A (2011) Comparative analysis of sea wave dissipation induced by three different flow mechanisms. J Hydraul Res 49(4):554–561
Principi P, Roberto F, Carbonari A, Lemma M (2016) Evaluation of energy conservation opportunities through energy performance contracting: a case study in Italy. Energy Build 128:886–899
Quattrini R, Pierdicca R, Morbidoni C (2017) Knowledge-based data enrichment for HBIM: exploring high-quality models using the semantic-web. J Cult Herit 28:129–139
Regni M, Arezzo D, Carbonari S, Gara F, Zonta D (2018) Effect of environmental conditions on the modal response of a 10-story reinforced concrete tower. Shock Vib 2018:1–16
Serpilli M, Lenci S (2012) Asymptotic modelling of the linear dynamics of laminated beams. Int J Solids Struct 49:1147–1157
Soldini L, Antuono M, Brocchini M (2013) Numerical modeling of the influence of the beach profile on wave run-up. J Waterw Port Coast Ocean Eng 139(1):61–71
Soldini L, Darvini G (2017) Extreme rainfall statistics in the Marche region Italy. Hydrol Res 48(3):686–700
Stimilli A, Virgili A, Canestrari F (2017) Warm recycling of flexible pavements: effective-ness of warm mix Asphalt additives on modified bitumen and mixture performance. J Clean Prod 156:911–922
Vaccarini M, Giretti A, Tolve LC, Casals M (2016) Model predictive energy control of ventilation for underground stations. Energy Build 116:326–340
Zampini G (2014) Il Testo Unico del 10 gennaio 2014; misura e certificazione della rappresentanza sindacale tra costituzione e autonomia collettiva. Argom di Dirit del Lav 3:629–665
Zitti G, Ancey C, Postacchini M, Brocchini M (2016) Impulse waves generated by snow avalanches: momentum and energy transfer to a water body. J Geophys Res Earth Surf 121(12):2399–2423
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this chapter
Cite this chapter
Alici, A. et al. (2019). Sustainable Engineering for Resilient Built and Natural Environments. In: Longhi, S., Monteriù, A., Freddi, A., Frontoni, E., Germani, M., Revel, G. (eds) The First Outstanding 50 Years of “Università Politecnica delle Marche”. Springer, Cham. https://doi.org/10.1007/978-3-030-32762-0_17
Download citation
DOI: https://doi.org/10.1007/978-3-030-32762-0_17
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-32761-3
Online ISBN: 978-3-030-32762-0
eBook Packages: EducationEducation (R0)