Abstract
Achieving the interoperability of the European rail system requires many measures to unify technical solutions as well as regulations in each Member State. However, there is a possibility of some incompatibilities between individual subsystems despite generating them in accordance with unified applicable requirements. It is possible that the interoperable rolling stock will not be able to move freely over the interoperable railway line due to some incompatibilities and differences in the versions of the installed firmware in the ERTMS/ETCS system devices. In connection with the above the correct integration of rail vehicles with track-side equipment should be examined by means of tests under operating conditions. The article presents compliance tests of the correct integration of the on-board subsystem with the track-side subsystem which are carried out by the Railway Research Institute.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Commission Regulation (EU) 2016/919 of 27 May 2016 on the technical specification for interoperability relating to the ‘control-command and signalling’ subsystems of the rail system in the European Union
Commission Directive 2011/18/EU of 1 March 2011 amending Annexes II, V and VI to Directive 2008/57/EC of the European Parliament and of the Council on the interoperability of the rail system within the Community
Commission Decision (EU) 2010/713 of 9 November 2010 on modules for the procedures for assessment of conformity, suitability for use and EC verification to be used in the technical specifications for interoperability adopted under Directive 2008/57/EC of the European Parliament and of the Council
System Requirements Specification UNISIG SUBSET-026 version 2.3.0d
System Requirements Specification UNISIG SUBSET-026 version 3.4.0
System Requirements Specification UNISIG SUBSET-104 version 3.3.0
The list of the President of the Office of Rail Transport on the relevant national technical specifications and standardization documents, the use of which allows meeting the essential requirements relating to the interoperability of the rail system of 19 January 2017
Adamski, D., Ortel, K.: Problematyka współpracy pokładowego systemu ERTMS/ETCS z polską infrastrukturą; Autobusy, June 2018
Kycko, M.: Metodyka certyfikacji podsystemu sterowanie. Prace Naukowe Politechniki Warszawskiej, Warsaw (2016)
Pawlik, M.: Europejski System Zarządzania Ruchem Kolejowym, przegląd funkcji i rozwiązań technicznych – od idei do wdrożeń i eksploatacji. KOW, Warsaw (2015)
ERA homepage. https://www.era.europa.eu/activities/european-rail-traffic-management-system-ertms_en
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Adamski, D., Ortel, K., Zawadka, Ł. (2020). Research on Proper Integration Between an On-Board and a Trackside Control-Command and Signalling Subsystems. In: Siergiejczyk, M., Krzykowska, K. (eds) Research Methods and Solutions to Current Transport Problems. ISCT21 2019. Advances in Intelligent Systems and Computing, vol 1032. Springer, Cham. https://doi.org/10.1007/978-3-030-27687-4_1
Download citation
DOI: https://doi.org/10.1007/978-3-030-27687-4_1
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-27686-7
Online ISBN: 978-3-030-27687-4
eBook Packages: Intelligent Technologies and RoboticsIntelligent Technologies and Robotics (R0)