Abstract
The purpose of this chapter is to provide an outlook on the future state of manufacturing in developed countries pertaining to supply chain management concerns. Supply chain demands and challenges are identified that stem from a predicted higher concentration of 3D printing and innovative production knowledge in localised innovative manufacturing clusters. The supply chain challenge is termed coopetition, which highlights the need for companies to collaborate and compete simultaneously depending on the market segment. This chapter further argues that 3D printing has the potential to become a key enabler for the circular economy model: tackling domestic waste issues via local manufacturing clusters. However, a major reconfiguration of the domestic supply chain structure including enhanced transparency of the waste material flow patterns is required to capitalise on the opportunity.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Notes
- 1.
Hofmann, E. and Rüsch, M., 2017. Industry 4.0 and the current status as well as future prospects on logistics. Computers in Industry, 89, pp. 23–34.
References
Beamon, B. M. (1999). Designing the green supply chain. Logistics Information Management, 14(4), 332–342.
Bengtsson, M., & Kock, S. (2014). Coopetition—Quo vadis? Past accomplishments and future challenges. Industrial Marketing Management, 43(2), 180–188.
Bengtsson, M., Raza-Ullah, T., & Vanyushyn, V. (2016). The coopetition paradox and tension: The moderating role of coopetition capability. Industrial Marketing Management, 53, 19–30.
Berman, B. (2012). 3-D printing: The new industrial revolution. Business Horizons, 55, 155–162.
Bogers, M., Hadar, R., & Billberg, A. (2016). Additive manufacturing for consumer-centric business models: Implications for supply chains in consumer goods manufacturing. Technological Forecasting and Social Change, 102, 225–239.
Brandenburger, A., & Nalebuff, B. (1996). Co-opetition. New York, NY: Doubleday.
CSC. (2012). 3D Printing and the future of manufacturing. Retrieved July 20, 2016, from http://www.csc.com/innovation/insights/92142-3d_printing_and_the_future_of_manufacturing?ref=Is.
Despeisse, M., Baumers, M., Brown, P., Charnley, F., Ford, S. J., Garmulewicz, A., Knowles, S., Minshall, T. H. W., Mortara, L., Reed-Tsochas, F. P., & Rowley, J. (2017). Unlocking value for a circular economy through 3D printing: A research agenda. Technological Forecasting and Social Change, 115, 75–84.
Garmulewicz, A., Holweg, M., Veldhuis, H., & Yang, A. (2018). Disruptive technology as an enabler of the circular economy: What potential does 3D printing hold? California Management Review, 60(3), 112–132.
Gebler, M., Schoot Uiterkamp, A. J. M., & Visser, C. (2014). A global sustainability perspective on 3D printing technologies. Energy Policy, 74, 158–167.
Hasan, S., Rennie, A., & Hasan, J. (2013). The business model for the functional rapid manufacturing supply chain. Studia Commercialia Bratislavensia, 6(24), 536–552.
Hofmann, E., & Rüsch, M. (2017). Industry 4.0 and the current status as well as future prospects on logistics. Computers in Industry, 89, 23–34.
Kreiger, M. A., Mulder, M. L., Glover, A. G., & Pearce, J. M. (2014). Life cycle analysis of distributed recycling of post-consumer high density polyethylene for 3-D printing filament. Journal of Cleaner Production, 70, 90–96.
Milne, C. (2013). Manufacturing in Australia; does it have a future?. Australian Innovation. Retrieved March 2, 2017, from http www.ausinnovation.org/publications/vision-2020/advancing-australia/manufacturing-in-australia-does-it-have-a-future.html.
Qin, J., Liu, Y., & Grosvenor, R. (2016). A categorical framework of manufacturing for industry 4.0 and beyond. Procedia CIRP, 52, 173–178.
Rylands, B., Böhme, T., Gorkin III, R., Fan, J., & Birtchnell, T. (2015). 3D printing – To print or not to print? Aspects to consider before adoption – A supply chain perspective. 22nd EurOMA Conference 2015. Neuchatel, Switzerland, June 26th–July 1st 2015.
Tjahjono, B., Esplugues, C., Ares, E., & Pelaez, G. (2017). What does Industry 4.0 mean to Supply Chain? Procedia Manufacturing, 13, 1175–1182.
Vezzoli, C., Ceschin, F., Diehl, J. C., & Kohtala, C. (2015). New design challenges to widely implement ‘Sustainable Product–Service Systems’. Journal of Cleaner Production, 97, 1–12.
Wainwright, S. (2018). For a war on waste that can win. Green Left Weekly 1175, p. 3.
Witkowski, K. (2017). Internet of things, big data, industry 4.0 – Innovative solutions in logistics and supply chains management. Procedia Engineering, 182, 763–769.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 The Author(s)
About this chapter
Cite this chapter
Böhme, T., Birtchnell, T. (2020). 3DP and the Domestication of Supply Chains in the Future. In: Eyers, D. (eds) Managing 3D Printing. Palgrave Macmillan, Cham. https://doi.org/10.1007/978-3-030-23323-5_11
Download citation
DOI: https://doi.org/10.1007/978-3-030-23323-5_11
Published:
Publisher Name: Palgrave Macmillan, Cham
Print ISBN: 978-3-030-23322-8
Online ISBN: 978-3-030-23323-5
eBook Packages: Business and ManagementBusiness and Management (R0)