Abstract
One of the most important ways to increase the efficiency of technological processes is to improve the column heat-mass transfer apparatuses. The design of a jet-film contact device for carrying out the heat-mass transfer processes within gas-liquid systems has been developed. The advantage of this device is a low hydraulic resistance and high mass transfer efficiency with relatively low energy demands. The development of a new technical solution has been carried out with the software module. The separation efficiency of the contact device with its different geometrical dimensions and diameters of the collected drops has been studied. It is established that the greatest separation efficiency of the contact device is provided when its geometrical constant is equal to 0.5, and medium dispersed aerosol particles with a diameter of 20 µm are collected by 99.5%. The high collecting efficiency at small geometrical constant of contact device is explained by the creation of large centrifugal forces due to small radii of gas flow vortices.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Kulov NN, Gordeev LS (2014) Mathematical modeling in chemical engineering and biotechnology. Theor Found Chem Eng 48:225–229. https://doi.org/10.1134/S0040579514030099
Khafizov FSh, Afanasenko VG, Khafizov IF, Ash Khaibrakhmanov, Boev EV (2008) Use of vortex apparatuses in gas cleaning process. Chem Pet Eng 44:425–428. https://doi.org/10.1007/s10556-008-9081-z
Kolev N, Kralev B, Kolev D (2013) Gas side controlled mass transfer in a new packing with stamped horizontal lamellae operating at extremely low liquid loads. Chem Eng Process 63:44–49. https://doi.org/10.1016/j.cep.2012.07.004
Wei ZJ, You ZL, Gui SQ (2010) Gas pressure drop and mass transfer characteristics in a cross-flow rotating packed bed with porous plate packing. Ind Eng Chem Res 49:3732–3740. https://doi.org/10.1021/ie9009777
Farakhov MI, Laptev AG, Basharov MM (2015) Modernization of mass-exchange equipment by new packings in chemical engineering. Theor Found Chem Eng 49:233–238. https://doi.org/10.1134/S0040579515030033
Maćkowiak J (2011) Model for the prediction of liquid phase mass transfer of random packed columns for gas-liquid systems. Chem Eng Res Des 89:1308–1320. https://doi.org/10.1016/j.cherd.2011.01.021
Contact elements for the column apparatuses (System INTALOX®, Packed Tower System). Catalogue of the company “KOCH-GLITSCH”
“Metal Random Packings” (Catalogue of the company “Sulzer Chemtech”, 22.64.06.40-v04-50)
Boev EV, Ivanov SP, Afanasenko VG, Nikolaev EA (2009) Polymeric drop-film sprinklers for cooling towers. Chem Pet Eng 45:454–459. https://doi.org/10.1007/s10556-009-9209-9
Bessou V, Rouzineau D, Prévost M, Abbé F, Dumont C, Maumus J-P, Meyer M (2010) Performance characteristics of a new structured packing. Chem Eng Sci 65:4855–4865. https://doi.org/10.1016/j.ces.2010.05.029
Li X, Yang X, Li H, Shi Q, Gao X (2018) Significantly enhanced vapor-liquid mass transfer in distillation process based on carbon foam ring random packing. Chem Eng Process 124:245–254. https://doi.org/10.1016/j.cep.2018.01.005
Dmitrieva OS, Dmitriev AV, Madyshev IN, Nikolaev AN (2017) Flow dynamics of mass exchangers with jet-bubbling contact devices. Chem Pet Eng 53:130–134. https://doi.org/10.1007/s10556-017-0308-8
Dmitriev AV, Dmitrieva OS, Madyshev IN, Nikolaev AN, Kruglov LV (2017) Contact device with film flow of liquid for heat and mass transfer apparatus. RU Patent 171022, 17 May 2017
Solovev SA, Soloveva OV, Popkova OS (2018) Numerical simulation of the motion of aerosol particles in open cell foam materials. Russ J Phys Chem A 92:603–606. https://doi.org/10.1134/S0036024418030275
Borisov BV (2016) Features applications of the approaches when constructing efficient algorithms during the modelling of some intracanal flows. EPJ Web of Conf 110:01012. https://doi.org/10.1051/epjconf/201611001012
Ponomarev KO, Orlova EG, Feoktistov DV (2016) Effect of the heat flux density on the evaporation rate of a distilled water drop. EPJ Web of Conf 110:01060. https://doi.org/10.1051/epjconf/201611001060
Zaripov SK, Solov’eva OV, Solov’ev SA (2015) Inertial deposition of aerosol particles in a periodic row of porous cylinders. Aerosol Sci Technol 49:400–408. https://doi.org/10.1080/02786826.2015.1036834
Klinskiy BM, Kudravtsev AV (2012) Justification of requirement to the vakue of mass concentration and dispersivity of water drops when designing the bench-scale plant for simulation of rain falling. Eng 81:10–12
Dmitriev AV, Madyshev IN, Dmitrieva OS, Nikolaev AN (2017) Research dispersing liquid and gas in the contact device with an increased range of stable operation. Ecol and Ind of Russ 21:12–15. https://doi.org/10.18412/1816-0395-2017-3-12-15
Madyshev IN, Dmitrieva OS, Dmitriev AV, Nikolaev AN (2015) Assessment of change in torque of stream-bubble contact mass transfer devices. Chem Pet Eng 51:383–387. https://doi.org/10.1007/s10556-015-0056-6
Acknowledgements
The research was conducted with funding from the RF President’s grant project No. MK-4522.2018.8.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Madyshev, I.N., Dmitrieva, O.S., Dmitriev, A.V. (2020). Development of New Types of Contact Devices for Heat-Mass Transfer Apparatuses, Used at Petrochemical Enterprises. In: Radionov, A., Kravchenko, O., Guzeev, V., Rozhdestvenskiy, Y. (eds) Proceedings of the 5th International Conference on Industrial Engineering (ICIE 2019). ICIE 2019. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-22063-1_11
Download citation
DOI: https://doi.org/10.1007/978-3-030-22063-1_11
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-22062-4
Online ISBN: 978-3-030-22063-1
eBook Packages: EngineeringEngineering (R0)