Abstract
It is known that when an elastic wheel, e.g., a car tire, moves on a solid supporting surface, its normal reaction is displaced longitudinally. The direction of such displacement in relation to the forward speed vector of the wheel depends on the wheel movement. The magnitude of such displacement (drift) is important as it determines the center of the friction-at-rest area in the contact spot, which triggers a lateral reaction of the supporting surface that determines the stability of wheel and car movement to a great extent. There used to be known only two components of such a drift. The first component characterizes hysteresis losses (radial and tangential) due to the wheel rolling. The second component characterizes the longitudinal elastic displacement of the wheel axis in relation to the geometric center of the contact spot. The authors have experimentally identified a new, i.e., the third component that characterizes elastic angular deformations in the tire, which cause the curve of normal stresses in the contact spot to be asymmetric. This third component has been found to have much greater magnitude than the two other components.
This is a preview of subscription content, log in via an institution to check access.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Balabin IV, Putin VA, Chabunin IS (2012) Automobile and tractor wheels and tires. MGTU MAMI, Moscow
Balakina EV (2017) Calculation of the geometric position and the sizes of the static friction and sliding friction zones at the point of contact between an elastic wheel and a firm surface. J Friction Wear 38(2):144–149
Balakina EV, Kochetkov AV (2017) Friction coefficient of tire with road surface. Mechanical Engineering, Moscow, 292 p
Balakina EV, Zotov NM (2015) Determination of the mutual arrangement of forces, reactions, and friction zones in the contact zone of an elastic wheel with a solid surface. J Friction Wear 36(1):29–32
Balakina EV, Zotov NM, Fedin AP (2018) Modeling of the motion of automobile elastic wheel in realtime for creation of wheeled vehicles motion control electronic systems. In: IOP conference series: materials science and engineering, vol 315, p 012004
Balakina EV et al (2015) Modeling techniques for tires based on diagram. Acta Technica CSAV (Ceskoslovensk Akademie Ved.) 60(2):173–178
Balakina E et al (2013) Problems of modelling of dynamic processes in real time (on the example of vehicle brake dynamics). Mechanical Engineering, Moscow, 299 p
Emami A et al (2017) Physics-based friction model with potential application in numerical models for tire-road traction. In: Dynamic systems and control conference, 6 p
Fedotov AI (2015) Dynamic method of diagnostics of pneumatic brake drives of motor vehicles: monograph. Publ. IrNITU, Irkutsk, p 514
Khaleghian S et al (2017) A technical survey on tire-road friction estimation. Friction 5(2):123–146
Khaleghian S, Ghasemalizadeh O, Taheri S (2016) Estimation of the tire contact patch length and normal load using intelligent tires and its application in small ground robot to estimate the tire-road friction. Tire Sci Technol TSTCA 44(4):248–261
Knoroz VI (ed), Klennikov EV, Petrov IP (1976) Operation of automobile tires. Transport, Moscow, 240 p
Koskinen S (2010) Sensor data fusion based estimation of tyre-road friction to enhance collision avoidance. Dissertation, Tampere University of Technology
Kravets VN, Selifonov VV (2011) Automobile theory. College textbook. OOO Greenlight, Moscow, p 884
Minca C (2015) The determination and analysis of tire contact surface geometric parameters. Rev Air Force Acad Romania 1:149–154
Morris de Beer et al (2012) Tyre—pavement interface contact stresses on flexible pavements—quo vadis? In: 8th Conference on asphalt pavements for Southern Africa, June, 2012
Pacejka HB (2012) Tire and vehicle dynamics. Published by Elsevier Ltd, USA
Petrushov VA (2008) Automobiles and road trains: new technologies of research of rolling and wind resistance. Torus Press, Moscow, p 352
Jazar RN (2008) Vehicle dynamics: theory and application. Springer Science+Business Media, LLC, London, p 1015
Tomaraee P et al (2015) Relationships among the contact patch length and width, the tire deflection and the rolling resistance of a free-running wheel in a soil bin facility. Span J Agric Res 13(2):7
Turenko AN, Lomaka SI, Ryzhikh LA, Leontiev DN (2010) Calculation of realized traction coefficient at wheel floating in braking mode. Automobile Transp 27:7–12
Woodward D et al (2014) The static contact patch of some friction measuring devices. In: 4th International safer roads conference. Cheltenham, United Kingdom, May 2014
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2020 Springer Nature Switzerland AG
About this paper
Cite this paper
Golubeva, T.A., Balakina, E.V. (2020). Finding New Component in Displacement of Normal Supporting Surface Reaction to Car Wheels. In: Radionov, A., Kravchenko, O., Guzeev, V., Rozhdestvenskiy, Y. (eds) Proceedings of the 5th International Conference on Industrial Engineering (ICIE 2019). ICIE 2019. Lecture Notes in Mechanical Engineering. Springer, Cham. https://doi.org/10.1007/978-3-030-22041-9_91
Download citation
DOI: https://doi.org/10.1007/978-3-030-22041-9_91
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-22040-2
Online ISBN: 978-3-030-22041-9
eBook Packages: EngineeringEngineering (R0)