Abstract
In serial robotic manipulators, due to the nature of the coupling of links, the influence of errors in joint parameters on pose accuracy varies with the configuration. Kinematics parameter’s error identification in the standard kinematics calibration has been configuration independent which does not consider the influence of kinematics parameter on robot tool pose accuracy for a given configuration. Mutually dependent joint parameter errors cannot be identified at the same time, and hence error of one parameter in each pair is identified. In a pair of mutually dependent joint parameters, the effect of error in one parameter on positional error can be more than the other one depending on the configuration. Therefore, the error detection may be incorrect if the influence of joint parameters is ignored during the error identification. This research analyses the configuration dependent influences of kinematics parameters error on pose accuracy of a robot. Based on the effect of kinematics parameters, the errors in the kinematics parameters are identified. Kinematics model of the robot is composed of the modified DH method and an improved DH method to avoid the limitations of the original DH method. First, the robot is calibrated to identify errors in 17 kinematics parameters conventionally, and then errors are detected based on the proposed method.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Conrad, K.L., Shiakolas, P.S., Yih, T.: Robotic calibration issues: accuracy, repeatability and calibration. In: Proceedings of the 8th Mediterranean Conference on Control & Automation, Rio, Patras, GREECE (2000)
Renders, J.M., Rossignol, E., Becquet, M., Hanus, R.: Kinematic calibration and geometrical parameter identification for robots. IEEE Trans. Robot. Autom. 7, 721–732 (1991). https://doi.org/10.1109/70.105381
Mooring, B.W., Roth, Z.S., Driels, M.R.: Fundamentals of Manipulator Calibration. Wiley, New York (1991)
Chen-Gang, C., Tong, L., Ming, C., Qing, J., Xu, S.: Review on kinematics calibration technology of serial robots. Int. J. Precis. Eng. Manuf. 15, 1759–1774 (2014)
Nubiola, A., Bonev, I.A.: Absolute calibration of an ABB IRB 1600 robot using a laser tracker. Robot. Comput.-Integr. Manuf. 29:236–245 (2013). https://doi.org/10.1016/j.rcim.2012.06.004
Wu, Y., Klimchik, A., Caro, S., Furet, B., Pashkevich, A.: Geometric calibration of industrial robots using enhanced partial pose measurements and design of experiments. Robot. Comput.-Integr. Manuf. 35, 151–168 (2015). https://doi.org/10.1016/j.rcim.2015.03.007
Johnsrud, V.: Improvement of the Positioning Accuracy of Industrial Robots. Norwegian University of Science and Technology, Masters (2014)
Roth, Z., Mooring, B., Ravani, B.: An overview of robot calibration. IEEE J. Robot. Autom. 3, 377–385 (1987). https://doi.org/10.1109/jra.1987.1087124
Acknowledgements
We would like to thank School of Mechanical Engineering, Adelaide for providing the resources for this research.
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2019 Springer Nature Switzerland AG
About this paper
Cite this paper
Patel, D.A., Lu, T.F., Chen, L. (2019). An Influence Based Error Identification for Kinematics Calibration of Serial Robotic Manipulators. In: (Chunhui) Yang, R., Takeda, Y., Zhang, C., Fang, G. (eds) Robotics and Mechatronics. ISRM 2017. Mechanisms and Machine Science, vol 72. Springer, Cham. https://doi.org/10.1007/978-3-030-17677-8_12
Download citation
DOI: https://doi.org/10.1007/978-3-030-17677-8_12
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-17676-1
Online ISBN: 978-3-030-17677-8
eBook Packages: EngineeringEngineering (R0)