Abstract
The article is about the construction of a robotic table for the separation and classification of objects for computer integrated manufacturing, consisting of a surface with gears distributed in modules with two gears each for x and y respectively, which allow the displacement of objects and their classification. The computer vision algorithms used to determine the position of the object are detailed. In addition, the Kd, Ki, Kp constants are auto tuned through a neural network to locate and track the objects transported. The design and construction features as well as the mechanical and electronic system are integrated into a mechatronic system. Finally, for the operation of the robotic table was tested with objects of different weights, the results showed the usefulness of the separation and classification system for the tracking of preset trajectories.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
Similar content being viewed by others
References
Malte, B., et al.: How virtualization, decentralization and network building change the manufacturing landscape. Int. J. Inf. Commun. Eng. 8, 37–44 (2014)
Moonet, J., et al.: Innovation in knowledge-intensive industries: the double-edged sword of competition. J. Bus. Res. 2060–2070 (2013)
Gwiazda, J.A., et al.: Modular industrial robots as the tool of process automation in robotized manufacturing cells. In: IOP Conference Series: Materials Science and Engineering, vol. 95, pp. 012104-1–6 (2015)
Cong, S., Liang, Y.: PID-like neural network nonlinear adaptive control for uncertain multivariable motion control systems. IEEE Trans. Ind. Electron. 3872–3879 (2009)
Beitao, G., et al.: Adaptive PID controller based on BP neural network. International Joint Conference on Artificial Intelligence, pp. 148–150 (2009)
Maleki, E.: Artificial neural networks application for modeling of friction stir welding effects on mechanical properties of 7075-T6 aluminum alloy. In: IOP Conference Series: Materials Science and Engineering, pp. 12–34 (2015)
González, F., Guarnizo, J.G., Benavides, G.: Emulation system for a distribution center using mobile robot, controlled by artificial vision and fuzzy logic. IEEE Latin Am. Trans. 12, 557–563 (2014)
Vikram, C., Sunil, K., Singla, D.: Comparative analysis of tuning a PID controller using intelligent methods. Acta Polytechnica Hungarica 235–249 (2014)
Boulogne, L.H.: Performance of neural networks for localizing moving objects with an artificial lateral line. In: IOP Conference Series: Materials Science and Engineering, pp. 1–13 (2017)
Hassan, A.K.I.: Modeling insurance fraud detection using imbalanced data classification. J. Comput. High. Educ. 1–7 (2015)
Kamir, et al.: Modeling insurance fraud detection using imbalanced data classification. Int. J. Innov. Eng. Technol. 1–9 (2015)
Oprea, C., et al.: A data mining based model to improve university management. J. Sci. Arts 1–6 (2017)
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2018 Springer Nature Switzerland AG
About this paper
Cite this paper
Terán, H.C. et al. (2018). Mobile Robotic Table with Artificial Intelligence Applied to the Separate and Classified Positioning of Objects for Computer-Integrated Manufacturing. In: Kuznetsov, S., Osipov, G., Stefanuk, V. (eds) Artificial Intelligence. RCAI 2018. Communications in Computer and Information Science, vol 934. Springer, Cham. https://doi.org/10.1007/978-3-030-00617-4_20
Download citation
DOI: https://doi.org/10.1007/978-3-030-00617-4_20
Published:
Publisher Name: Springer, Cham
Print ISBN: 978-3-030-00616-7
Online ISBN: 978-3-030-00617-4
eBook Packages: Computer ScienceComputer Science (R0)