Abstract
Transportation of lignocellulosic biomass feedstock is an important task within a biomass-based energy provision system. The distributed availability of low-density feedstock makes this operation highly challenging. The proposed aim to replace a large percentage of fossil fuels with renewable lignocellulosic bioenergy sources by the year 2030 [1, 2] will require adaptation and possibly renovation of the existing transportation infrastructure. The complexity of the biomass provision system will be further increased as compared to the current system since the biomass feedstock portfolio will consist of a range of energy crops, grown in various locations with unique climates and transportation infrastructures.
Ideally, biomass would be preprocessed into a gravity-flowable particulate bulk form that allows utilization of and expanding upon the existing transportation infrastructure of agricultural bulk products such as corn and soybean. Such a form would require size reduction of feedstock, which is energetically expensive, followed by compression. To optimize long-distance transport, the bulk density of this feedstock would ideally be as high as that of coal in railcars. This would require very high “in-mold” particulate densities of the feedstock generated by machines with very high throughput. Even if this goal could be achieved, it is currently not clear what the effect of such a highly densified material form on the conversion efficiency would be.
Finally, apart from technical challenges in producing the ideal form of biomass from a provision and conversion perspective, there is a huge challenge in the mere scale of the proposition: If the goal set by the US government of replacing 30 % of current fossil fuels by 2030 is to be reached, the annual transported volume of biomass would be three times that of the 2011 US corn yield.
This chapter reviews the literature on research that addresses biomass feedstock provision including transportation and identifies challenges that must be addressed in the near future.
Access this chapter
Tax calculation will be finalised at checkout
Purchases are for personal use only
References
Perlack R, Wright L, Turhollow A, Graham R, Stokes B, Erbach D (2005) Biomass as feedstock for a bioenergy and bioproducts industry: the technical feasibility of a billion-ton annual supply. U.S. Department of Energy Oak Ridge National Laboratory, Oak Ridge, TN. p: 1–78
U.S. Department of Energy Biomass Program (2012) Feedstock supply and logistics: biomass as a commodity. DOE/EE-0766. Available at: https://www1.eere.energy.gov/bioenergy/pdfs/feedstocks_four_pager.pdf (verified on Dec. 13, 2013)
Humbird D, Davis R, Tao L, Kinchin C, Hsu D, Aden A, Schoen P, Lukas J, Olthof B, Worley M, Sexton D, Dudgeon D (2011) Process design and economics for biochemical conversion of lignocellulosic biomass to ethanol: dilute-acid pretreatment and enzymatic hydrolysis of corn stover. U.S. Department of Energy National Renewable Energy Laboratory, Golden, CO. p: 1–114
Miao Z, Grift T, Hansen A, Ting K (2013) Energy requirement for lignocellulosic feedstock densifications in relation to particle physical properties, pre-heating and binding agents. Energy Fuel 27:588–595
U.S. Department of Energy (2011) U.S. Billion-ton update: biomass supply for a bioenergy and bioproducts industry. U.S. Department of Energy Oak Ridge National Laboratory, Oak Ridge, TN. p: 1–227
Hess J, Kenney K, Ovard L, Searcy E, Wright C (2009) Commodity-scale production of an infrastructure-compatible bulk solid from herbaceous lignocellulosic biomass. Idaho National Laboratory, Idaho Falls, ID
Mosier N, Wyman C, Dale B, Elande R, Lee Y, Holtzapple M, Ladisch M (2005) Features of promising technologies for pre-treatment of lignocellulosic biomass. Bioresour Technol 96:673–686
Alizadeh H, Teymouri F, Gilbert T, Dale B (2005) Pre-treatment of switchgrass by Ammonia Fiber Explosion. Appl Biochem Biotechnol 124(1–3):1133–1141
Chundawat S, Ventakesh B, Dale B (2007) Effect of particle size based separation of milled corn stover on AFEX pre-treatment and enzymatic digestibility. Biotechnol Bioeng 96(2):219–231
Lam P, Sokhansanj S, Bi X, Lim C, Naimi L, Hoque M, Mani S, Womac A, Ye X, Narayan S (2008) Bulk density of wet and dry wheat straw and switchgrass particles. Appl Eng Agric 24:351–358
Miao Z, Shastri Y, Grift T, Hansen A, Ting K (2012) Lignocellulosic biomass feedstock transportation alternatives, logistics, equipment configuration and modeling. Biofuels Bioprod Bioref 6:351–362
Smith J, Grisso R, VonBargen K, Anderson B (1988) Management tips for round bale hay harvesting, moving, and storage. http://digitalcommons.unl.edu/cgi/viewcontent.cgi?article=2306&context=extensionhist. Accessed 28 June 2013
Do Canto J, Klepac J, Rummer R, Savoie P, Seixas F (2011) Evaluation of two round baling systems for harvesting understory biomass. Biomass Bioenergy 35:2163–2170
Cundiff J, Grisso R (2008) Containerized handling to minimize hauling cost of herbaceous biomass. Biomass Bioenergy 2008:308–313
Shinners K, Boettcher G, Hoffman D, Munk J, Muck R, Weimer P (2009) Single-pass harvest of corn grain and stover: performance of three harvester configurations. Trans ASABE 52(1):51–60
El Bassam N, Huisman W (2001) Harvesting and storage of Miscanthus. In: Walsh M, Jones M (eds) Miscanthus for energy and fibre. James & James, London, pp 86–108
Bruglieri M, Liberti L (2008) Optimal running and planning of a biomass-based energy production process. Energy Policy 36(7):2430–2438
Aggarwal A, Singh H, Kumar P, Singh M (2008) Optimizing power consumption for CNC turned parts using response surface methodology and Taguchi’s technique: a comparative analysis. J Mater Proc Technol 200:373–384
Zhu J, Wang G, Pan X, Gleisner R (2009) Specific surface to evaluate the efficiencies of milling and pre-treatment of wood for enzymatic saccharification. Chem Eng Sci 64:474–485
Miao Z, Grift T, Hansen A, Ting K (2011) Energy requirement for comminution of biomass in relation to particle physical properties. Ind Crop Prod 33:504–513
Kumar P, Barrett D, Delwiche M, Stroeve P (2009) Methods of pre-treatment of lignocellulosic biomass for efficient hydrolysis and biofuel production. Ind Eng Chem Res 48:3713–3729
Mani S, Tabil L, Sokhansanj S (2004) Grinding performance and physical properties of wheat and barley straws, corn stover and switch grass. Biomass Bioenergy 27:339–352
Alvo P, Belkacemi K (1997) Enzymatic saccharification of milled Timothy (Phleum Pratense L.) and alfalfa (Medicago Sativa L.). Bioresour Technol 61:185–198
Badger P, Fransham P (2006) Use of mobile fast pyrolysis plants to densify biomass and reduce biomass handling costs-A preliminary assessment. Biomass Bioenergy 30:321–325
Akunov F (1995) Generalized grinding law. Chem Pet Eng 31(3–4):208–211
Cadoche L, López G (1989) Assessment of size reduction as a preliminary step in the production of ethanol from lignocellulosic wastes. Biol Wastes 30:153–157
Jannasch R, Quan Y, Samson R (2001) Final report: a process and energy analysis of pelletizing switch grass. Resource Efficient Agricultural Production (REAP), Ste. Anne de Bellevue, QC
Morrell S (2008) A method for predicting the specific energy requirement of comminution circuits and assessing their energy utilisation efficiency. Miner Eng 21:224–233
Bitra V, Womac A, Chevanan N, Miu P, Igathinathane C, Sokhansanj S, Smith D (2009) Direct mechanical energy measures of hammermill comminution of switchgrass, wheat straw, and corn stover and analysis of their particle size distributions. Powder Technol 193:32–45
Igathinathane C, Womac A, Sokhansanj S, Narayan S (2008) Knife grid size reduction to pre-process packed beds of high- and low-moisture switchgrass. Bioresour Technol 99(7): 2254–2264
Igathinathane C, Womac A, Sokhansanj S, Narayan S (2009) Size reduction of high- and low-moisture corn stalks by linear knife grid system. Biomass Bioenergy 33(4):547–557
Mani S, Tabilb L, Sokhansanj S (2006) Effects of compressive force, particle size and moisture content on mechanical properties of biomass pellets from grasses. Biomass Bioenergy 30(7):648–654
Tumuluru T, Wright C, Hess J, Kenney K (2011) A review of biomass densification systems to develop uniform feedstock commodities for bioenergy application. Biofuels Bioprod Bioref 5(6):683–707
Freightcar America Inc. (2012) http://www.johnstownamerica.com/Coke-Coal-Railcars.htm. Accessed 14 Aug 2012
Miao Z, Phillips J, Grift T, Mathanker S (2013) Energy and pressure requirement for compression of Miscanthus giganteus to an extreme density. Biosyst Eng 114:21–25
Kaliyan N, Morey R (2009) Densification characteristics of corn stover and switchgrass. Trans ASABE 52(3):907–920
Zou R, Yu A (1996) Evaluation of the packing characteristics of mono-sized non-spherical particles. Powder Technol 88:71–79
Richard T (2010) Challenges in scaling up biofuel infrastructure. Science 329(5993):793–796
International ICF (2009) Comparative evaluation of rail and truck fuel efficiency on competitive corridors. U.S. Department of Transportation, Federal Railroad Administration, Washington, DC
Mahmudi H, Flynn P (2006) Rail vs truck transport of biomass. Appl Biochem Biotechnol 129–132:88–103
Searcy E, Flynn P, Ghafoori E, Kumar A (2007) The relative cost of biomass energy. Appl Biochem Biotechnol 136–140(1–12):639–652
Kumar A, Flynn P (2006) Uptake of fluids by boreal wood chips: implications for bioenergy. Fuel Process Technol 87:605–608
Rentizelas A, Tatsiopoulos I, Tolis A (2009) An optimization model for multi-biomass tri-generation energy supply. Biomass Bioenergy 33:223–233
Gunnarsson C, Vågström L, Hansson P (2008) Logistics for forage harvest to biogas production—timeliness, capacities and costs in a Swedish case study. Biomass Bioenergy 32(12):1263–1273
Le Gal P, Lyne P, Meyer E, Soler L (2008) Impact of sugarcane supply scheduling on mill sugar production: a South African case study. Agric Syst 96(1–3):64–74
Miao Z, Grift T, Hansen A, Ting K (2013) An overview of lignocellulosic biomass feedstock harvest, processing and supply for biofuel production. Biofuels 4(1):5–8
Lyne P (2010) The latest in transport management and technologies. SAIAE News Lett 3–5
Sustainability Program, Office of Research and Development, U.S. Environmental Protection Agency (2007) Biomass conversion: emerging technologies, feedstock, and products. EPA/600/R-07/144
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2014 Springer Science+Business Media New York
About this chapter
Cite this chapter
Grift, T.E., Miao, Z., Hansen, A.C., Ting, K.C. (2014). Transportation. In: Shastri, Y., Hansen, A., Rodríguez, L., Ting, K. (eds) Engineering and Science of Biomass Feedstock Production and Provision. Springer, New York, NY. https://doi.org/10.1007/978-1-4899-8014-4_6
Download citation
DOI: https://doi.org/10.1007/978-1-4899-8014-4_6
Published:
Publisher Name: Springer, New York, NY
Print ISBN: 978-1-4899-8013-7
Online ISBN: 978-1-4899-8014-4
eBook Packages: Biomedical and Life SciencesBiomedical and Life Sciences (R0)