Abstract
This study presents the response of rubber panels subjected to high-velocity impact loading. The mechanical properties and impact performance of rubber panels are altered by the variation in compound ingredients. To investigate the effect of compound ingredients, two types of rubber panels with high (SHA70) and low hardnesses (SHA45) were prepared, and mechanical properties and impact resistance of the panels were measured by high-velocity impact tests in a velocity range of 70–160 m/s. Ballistic limits of about 80 and 94 m/s were obtained for the low- and high-hardness rubbers, respectively, which show that the energy absorption of rubber panels increases as filler loading content increases. In this respect, the finite-element simulation has been performed to investigate the ballistic performance of rubber panels numerically. Rubber panel has been modeled using the LS-DYNA software and employing the experimental results of tensile test to characterize the behavior of panel. The findings show a good agreement between the numerical and experimental data. To study the effect of projectile’s shape, impact resistance of the rubber panels against hemispherical projectiles with different length-to-diameter (L/D) ratios (projectiles with diameters of 8, 10, and 12 mm) was measured and the model was also used. The results demonstrate that energy absorption of the panel increases as the diameter of projectile increases. The energy absorbed by the rubber panels appears in the form of damages that lead to increase their damage zone.
Similar content being viewed by others
References
Vergnaud JM, Rosca ID (2016) Rubber curing and properties. CRC, Florida
Bhattacharya M, Bhowmick AK (2010) Synergy in carbon black-filled natural rubber nanocomposites. Part I: mechanical, dynamic mechanical properties, and morphology. Mater Sci 45:6126–6138
Fröhlich J, Niedermeier W, Luginsland HD (2005) The effect of filler–filler and filler–elastomer interaction on rubber reinforcement. Compos Part A 36:449–460
Leblanc JL (2002) Rubber–filler interactions and rheological properties in filled compounds. Prog Polym Sci 27:627–687
Li X, Li Z, Xia Y (2015) Test and calculation of the carbon black reinforcement effect on the hyper-elastic properties of tire rubbers. Rubber Chem Technol 88:98–116
Manroshan S, Baharin A (2005) Effect of nanosized calcium carbonate on the mechanical properties of latex films. J Appl Polym Sci 96:1550–1556
Visakh P, Thomas S, Oksman K, Mathew AP (2012) Crosslinked natural rubber nanocomposites reinforced with cellulose whiskers isolated from bamboo waste: processing and mechanical/thermal properties. Compos Part A 43:735–741
Nabil H, Ismail H, Azura A (2014) Properties of natural rubber/recycled ethylene–propylene–diene rubber blends prepared using various vulcanizing systems. Iran Polym J 23:37–45
Brydson JA (1978) Rubber chemistry. Applied science publishers, London, p 462
Li Z, Zhang J, Chen S (2008) Effects of carbon blacks with various structures on vulcanization and reinforcement of filled ethylene-propylene-diene rubber. Exp Polym Lett 2:695–704
Luyt AS, McGill WJ, Shillington D (1990) DSC study of the interaction of 2-mercaptobenzothiazole, sulphur, ZnO and stearic acid in the absence of rubber. Polym Int 23:135–139
Khodadadi A, Liaghat GH, Sabet AR, Hadavinia H, Aboutorabi A, Razmkhah O (2018) Experimental and numerical analysis of penetration into Kevlar fabric impregnated with shear thickening fluid. J Thermoplast Compos Mater 31:392–407
Moallemzadeh AR, Sabet AR, Abedini H (2017) Mechanical and morphological study of polymer composite plates having different fiber surface treatments with particular response to high velocity projectile impact. Iran Polym J 26:229–238
Mamivand M, Liaghat G (2010) A model for ballistic impact on multi-layer fabric targets. Int J Impact Eng 37:806–812
Studebaker M, Beatty J (1974) Effects of compounding on dynamic mechanical properties of rubber. Rubber Chem Technol 47:803–824
Söver A, Frormann L, Kipscholl R (2009) High impact-testing machine for elastomers investigation under impact loads. Polym Test 28:871–874
Fatt MSH, Ouyang X (2007) Integral-based constitutive equation for rubber at high strain rates. Solids Struct 44:6491–6506
Sasso M, Palmieri G, Chiappini G, Amodio D (2008) Characterization of hyperelastic rubber-like materials by biaxial and uniaxial stretching tests based on optical methods. Polym Test 27:995–1004
Mooney M (1940) A theory of large elastic deformation. J Appl Phys 11:582–592
Selvadurai A (2006) Deflections of a rubber membrane. Mech Phys Solids 54:1093–1119
Neves R, Micheli G, Alves M (2010) An experimental and numerical investigation on tyre impact. Impact Eng 37:685–693
Pamplona D, Goncalves P, Lopes S (2006) Finite deformations of cylindrical membrane under internal pressure. Mech Sci 48:683–696
Roland CM (2012) Glass transition in rubbery materials. Rubber Chem Technol 85:313–326
Acknowledgements
The authors are grateful to the Tarbiat Modares University (TMU) for their financial support.
Author information
Authors and Affiliations
Corresponding author
Rights and permissions
About this article
Cite this article
Khodadadi, A., Liaghat, G., Ahmadi, H. et al. Numerical and experimental study of impact on hyperelastic rubber panels. Iran Polym J 28, 113–122 (2019). https://doi.org/10.1007/s13726-018-0682-x
Received:
Accepted:
Published:
Issue Date:
DOI: https://doi.org/10.1007/s13726-018-0682-x