Skip to main content
Log in

Numerical simulation of mechanical response of glacial tills under biaxial compression with the DEM

  • Original Paper
  • Published:
Bulletin of Engineering Geology and the Environment Aims and scope Submit manuscript

Abstract

Glacial till deposits in the Greater Toronto Area (GTA) usually comprise fine-grained (clay and silt) and coarse-grained (sand, gravel, cobbles, and boulders) fractions, which are substantially heterogeneous in characteristics. Since coarse-grained fractions are too large to be tested in traditional laboratory equipment, the discrete element method (DEM) is applied in this study to simulate a series of large-scale biaxial tests to study the mechanical characterization of glacial till. This study is based on the results of comprehensive geotechnical investigations for the Eglinton Crosstown Light Rail Transit (LRT) Project in the GTA. The fine-grained till (clayey silt till) examined in this work is collected from the O’Connor Station site. The different proportions, gradations, and sizes of the coarse-grained fractions (gravel) with irregular random shapes and distributions are simulated. The analysis results indicate that the proportion of gravel influences the behavior and mechanical characterization of glacial till. The peak strength and initial modulus of the mixture gradually increase as the volumetric proportion of gravel increases to 30%. Beyond this percentage, the peak strength and initial modulus substantially increase. The failure mode of the sample changes from ductile to brittle with a volumetric proportion of gravel that is greater than 30%. In summary, when the volumetric proportion of gravel is limited to 30%, the gradation and size of the gravel only have a marginal influence on the mechanical characterization of the glacial till. However, a volumetric proportion of the gravel that exceeds 30% has significant impacts on the strength and deformation characteristics of glacial till.

This is a preview of subscription content, log in via an institution to check access.

Access this article

Price excludes VAT (USA)
Tax calculation will be finalised during checkout.

Instant access to the full article PDF.

Institutional subscriptions

Fig. 1
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12
Fig. 13
Fig. 14
Fig. 15
Fig. 16
Fig. 17
Fig. 18
Fig. 19
Fig. 20

Similar content being viewed by others

References

  • Afifipour M, Moarefvand P (2014a) Mechanical behavior of bimrocks having high rock block proportion. Int J Rock Mech Min Sci 65:40–48

    Article  Google Scholar 

  • Afifipour M, Moarefvand P (2014b) Failure patterns of geomaterials with block-in-matrix texture: experimental and numerical evaluation. Arab J Geosci 7(7):2781–2792

    Article  Google Scholar 

  • Afriani L (2003) Essais de cisaillement direct des sols grossiers: incidence des procédures d’essai et effets d'échelle. Dissertation, University of Caen

  • Alonso-Marroquin F (2008) Spheropolygons: a new method to simulate conservative and dissipative interactions between 2D complex-shaped rigid bodies. EPL 83(1):14001

    Article  Google Scholar 

  • Atkinson JH, Little JA (1988) Undrained triaxial strength and stress-strain characteristics of a glacial till soil. Can Geotech J 25(3):428–439

    Article  Google Scholar 

  • Bagherzadeh-Khalkhali A, Mirghasemi AA (2009) Numerical and experimental direct shear tests for coarse-grained soils. Particuology 7(1):83–91

    Article  Google Scholar 

  • Calvetti F, Viggiani G, Tamagnini C (2003) A numerical investigation of the incremental behavior of granular soils. Riv Ital Geotecnica 37(3):11–29

    Google Scholar 

  • Cao LF, Peaker S, Ahmad S (2015) Engineering characteristic of glacial tills in GTA. 68th Canadian Geotechnical Conference, Québec

  • Canadian Geotechnical Society (2006) Canadian foundation engineering manual, 4th edn. The Canadian Geotechnical Society, Canada

    Google Scholar 

  • Cho NA, Martin CD, Sego DC (2007) A clumped particle model for rock. Int J Rock Mech Min Sci 44(7):997–1010

    Article  Google Scholar 

  • Crosstown Community Office (2016) What is the Crosstown? IOP Publishing the crosstown Web. http://www.thecrosstown.ca/the-project. Accessed 27 June 2016

  • Cundall PA (1971) A computer model for simulating systems. ISRM, Nancy, France 2(8):129–136

    Google Scholar 

  • Cundall PA, Strack OD (1979) A discrete numerical model for granular assemblies. Geotechnique 29(1):47–65

    Article  Google Scholar 

  • Donaghe RT, Townsend FC (1976) Scalping and replacement effects on the compaction characteristics of earth-rock mixtures. ASTM STP 599:377

    Google Scholar 

  • El Dine SB, Dupla JC, Frank R, Canou J, Kazan Y (2010) Mechanical characterization of matrix coarse-grained soils with a large-sized triaxial device. Can Geotech J 47(4):425–438

    Article  Google Scholar 

  • Fragaszy RJ, Su J, Siddiqi FH, Ho CL (1992) Modeling strength of sandy gravel. J Geotech Eng ASCE 118(6):920–935

    Article  Google Scholar 

  • Frost RJ (1973) Some testing experiences and characteristics of boulder-gravel fill in earth dams. ASTM STP 523:207

    Google Scholar 

  • Gueye B, Zoubir B (2014) Influence of grain size coarse soil on shear strength. MATEC Web of Conferences. https://doi.org/10.1051/matecconf/20141103009

  • He J, Li X, Li S, Gu J, Yin Y (2009) Numerical study of rock-soil aggregate by discrete element modeling. FSKD 4:565–569

    Google Scholar 

  • Hamidi A, Azini E, Masoudi B (2012) Impact of gradation on the shear strength-dilation behavior of well graded sand-gravel mixtures. Sci Iran 19(3):393–402

    Article  Google Scholar 

  • Huang H (1999) Discrete element modeling of tool-rock interaction. Dissertation, University of Minnesota

  • Huang X, Zhao Q, Qi S, Xia K, Grasselli G, Chen X (2016) Numerical simulation on seismic response of the filled joint under high amplitude stress waves using finite-discrete element method (FDEM). Materials 10(1):13

    Article  Google Scholar 

  • Hashin Z (1955) The moduli of an elastic solid reinforced by rigid particles. Bull Res Counc Israel C 5:46–59

    Google Scholar 

  • Iannacchione AT, Vallejo LE (2000) Shear strength evaluation of Clay-Rock mixtures. Geotech S.P. 209–223

  • ITASCA Consulting Group, Inc (1996) PFC2D. Particle flow in two-dimensions, version 2.0, user manual. Minneapolis, Minnesota

  • Jafari MK, Shafiee A (2004) Mechanical behavior of compacted composite clays. Can Geotech J 41(6):1152–1167

    Article  Google Scholar 

  • Jensen RP, Edil TB, Bosscher PJ, Plesha ME, Kahla NB (2001) Effect of particle shape on Interface behavior of DEM-simulated granular materials. Int J Geomech 1(1):1–19

    Article  Google Scholar 

  • Karrow PF, White OL (1998) Urban geology of Canadian cities. Geological Association of Canada, Newfoundland

    Google Scholar 

  • Kalender A, Sonmez H, Medley E, Tunusluoglu C, Kasapoglu KE (2014) An approach to predicting the overall strengths of unwelded bimrock and bimsoils. Eng Geol 183:65–79

    Article  Google Scholar 

  • Klohn EJ (1965) The elastic properties of a dense glacial till deposit. Can Geotech J 11(2):116–128

    Article  Google Scholar 

  • Lebourg T, Riss J, Pirard E (2004) Influence of morphological characteristics of heterogeneous moraine formations on their mechanical behaviour using image and statistical analysis. Eng Geol 73(1):37–50

  • Liakas S, O’Sullivan C, Saroglou C (2017) Influence of heterogeneity on rock strength and stiffness using discrete element method and parallel bond model. J Rock Mech Geotech Eng 9(4):575–584

    Article  Google Scholar 

  • Lindquist ES, Goodman RE (1994) Strength and deformation properties of a physical model. 1st North American Rock Mechanics Symposium. Austin

  • Lowe J (1964) Shear strength of coarse embankment dam materials. 8th Int. Congress on Large Dams, Paris 3, 745–761

  • Manzari M, Drevininkas A, Olshansky D, Galaa A (2014) Behavioural modelling of Toronto Glacial Soils and implementation in numerical modelling. 67th Canadian Geotechnical Conference, Saskatchewan

  • Medley EW (1996) The engineering characterization of melanges and similar block-in-matrix rocks (bimrocks). Dissertation, University of California

  • Miller EA, Sowers GF (1958) The strength characteristics of soil-aggregate mixtures and discussion. Highw Res Board Bull 183:16–32

    Google Scholar 

  • Mollon G, Zhao J (2012) Fourier-Voronoi-based generation of realistic samples for discrete modelling of granular materials. Granul Matter 14(5):621–638

    Article  Google Scholar 

  • O’Sullivan C, Bray J, Li S (2003) A new approach for calculating strain for particulate media. Int J Numer Anal Methods Geomech 27(10):859–877

    Article  Google Scholar 

  • Potyondy DO, Cundall PA (2004) A bonded-particle model for rock. Int J Rock Mech Min Sci 41(8):1329–1364

    Article  Google Scholar 

  • Radhakrishna HS, Klym TW (1974) Geotechnical properties of a very dense glacial till. Can Geotech J 11(3):396–408

    Article  Google Scholar 

  • SPL Consultants Limited (2013) Geo-engineering factual data report, preliminary design, Victoria Park Station, Transit Expansion, Eglinton Cross Town LRT, Toronto, Ontario

  • Shakoor A, Cook BD (1990) The effect of stone content, size, and shape on the engineering properties of a compacted silty clay. Bull Assoc Eng Geol 27(2):245–253

    Google Scholar 

  • Sharpe DR (1980) Quaternary geology of Toronto and surrounding area. Ontario Geological Survey, Geological Series Preliminary Map P. 2204

  • Toronto Transit Commission (2014) Geo. Technical Standards, Version 8

  • Vallejo LE, Mawby R (2000) Porosity influence on the shear strength of granular material–clay mixtures. Eng Geol 58(2):125–136

    Article  Google Scholar 

  • Varadarajan A, Sharma KG, Venkatachalam K, Gupta AK (2003) Testing and modeling two rockfill materials. J Geotech Geoenviron 129(3):206–218

    Article  Google Scholar 

  • Vallejo LE, Lobo-Guerrero S (2005) The elastic moduli of clays with dispersed oversized particles. Eng Geol 78(1):163–171

    Article  Google Scholar 

  • Wang SN, Shi C, Xu WY, Wang HL, Zhu QZ (2014a) Numerical direct shear tests for outwash deposits with random structure and composition. Granul Matter 16(5):771–783

    Article  Google Scholar 

  • Wang ZJ, Ruiken A, Jacobs F, Ziegler M (2014b) A new suggestion for determining 2D porosities in DEM studies. Geomech Eng 7(6):665–678

    Article  Google Scholar 

  • Xu WJ, Yue ZQ, Hu RL (2008) Study on the mesostructure and mesomechanical characteristics of the soil–rock mixture using digital image processing based finite element method. Int J Rock Mech Min Sci 45(5):749–762

    Article  Google Scholar 

  • Yoon J (2007) Application of experimental design and optimization to PFC2D model calibration in uniaxial compression simulation. Int J Rock Mech Min Sci 44(6):871–889

    Article  Google Scholar 

  • Zeller J, Wullimann R (1957) The shear strength of the shell materials for the Göschenenalp Dam, Switzelland. 4th Inst. J. SMFE, London 2: 399–404

Download references

Acknowledgements

This study was funded by the Natural Sciences and Engineering Research Council of Canada and sponsored by WSP Canada Inc. The financial support from China Scholar Council is greatly appreciated for supporting the first author during her 2-year visit to Ryerson University. The authors are grateful for the guidance and help from Mr. Shengnian Wang of Hohai University and Mr. Peiyuan Liu of Ryerson University.

Author information

Authors and Affiliations

Authors

Corresponding author

Correspondence to Wanghua Sui.

Rights and permissions

Reprints and permissions

About this article

Check for updates. Verify currency and authenticity via CrossMark

Cite this article

Liang, Y., Cao, L., Liu, J. et al. Numerical simulation of mechanical response of glacial tills under biaxial compression with the DEM. Bull Eng Geol Environ 78, 1575–1588 (2019). https://doi.org/10.1007/s10064-018-1229-2

Download citation

  • Received:

  • Accepted:

  • Published:

  • Issue Date:

  • DOI: https://doi.org/10.1007/s10064-018-1229-2

Keywords

Navigation