Abstract
Recycling and environmental aspects of adhesion technology are discussed in this chapter. Adhesively bonded adherends should be often separated before they can be recycled. For this purpose, dismantlable adhesives, which can be separated with stimulations, have been developed recently. There are lots of technical processes to realize such adhesives. For example, softening of adhesive, expansion force due to blowing agents or thermally expandable microcapsules, chemical degradation, electrochemical reaction, and taking advantage of interfacial phenomena can be applied to dismantlable adhesives. These adhesives have many applications such as temporary joints of work materials, shoe making, integrated circuits (IC) chip fabrication, electronics, housing construction, car fabrication, and so on. The most used trigger to start the separation of these adhesives is heating. Many kinds of methods including infrared, induction, and microwave heating are recently available. In addition, novel dismantlable adhesives, which have anisotropy in strength or are triggered by electric currents, have been presented.
This is a preview of subscription content, log in via an institution.
Buying options
Tax calculation will be finalised at checkout
Purchases are for personal use only
Learn about institutional subscriptionsReferences
Alcorta J, Papon E et al (2004) WO Patent 2004/087829
Bain PS, Manfre G (2000) WO Patent 2000/75254
Chang EP (1991) Viscoelastic windows of pressure-sensitive adhesives. J Adhes 34:189
Chino K (2006) Thermoreversible crosslinking rubber using supramolecular hydrogen bonding networks. Kautschuk Gummi Kunststotte 2006, April:158
Chino K, Ashiura M (2001) Themoreversible cross-linking rubber using supramolecular hydrogen-bonding networks. Macromolecules 34:9201
Chino K, Ashiura M et al (2002) Thermo reversible crosslinking rubber using supramolecular hydrogen bonding networks. Rubber Chem Technol 75:713
Fay P (2005) History of adhesive bonding. In: Adams R (ed) Adhesive bonding – science, technology and applications. Woodhead, Cambridge, pp 3–22
Horner M, Boerio J (1990) Cathodic delamination of an epoxy/polyamide coating from steel. J Adhes 32:141
Ishikawa H, Seto K et al (2004) Dismantlable adhesive and evaluation of practical uses for building materials. J Soc Mater Sci Japan 53:1143 (in Japanese)
Ishikawa H, Seto K et al (2005) Bond strength and disbonding behavior of elastomer and emulsion-type dismantlable adhesives used for building materials. Int J Adhes Adhes 25:193
Jos H, Leite L (2007) MSc thesis, Faculty of Engineering of the University of Porto (in Portuguese)
Kadota J, Hasegawa K et al (2004) Adhesive of lignophenols/polyacrylate for wood. J Adhes Soc Japan 40:101 (in Japanese)
Kishi H, Inada Y et al (2006) Design of dismantlable structural adhesives with high temperature performance. J Adhes Soc Japan 42:356 (in Japanese)
Krawinkel Th (2003) In: Proceedings of Swiss Bonding 03, Rapperswill, Switzerland, pp 225–233 (in German)
Lee H, Lee B et al (2007) A reversible wet/dry adhesive inspired by mussels and geckos. Nature 448:338
Matsumoto A, Taketani S (2006) Regiospecific radical polymerization of a tetra-substituted ethylene monomer with molecular oxygen for the synthesis of a new degradable polymer. J Am Chem Soc 128:4566
Mori S, Harano K (2009) Shuzu no seikei kakou. Seikei kakou 21:305 (in Japanese)
Nishida H, Hirayama N (2006) PCT/JP2006/309543 Patent
Nishiyama Y, Sato C (2005) Behavior of dismantlable adhesives including thermally expansive microcapsules. In: Possart W (ed) Adhesion – current research and applications. Wiley, New York, pp 555–568
Nishiyama Y, Uto N et al (2003) Dismantlement behavior and strength of dismantlable adhesive including thermally expansive particles. Int J Adhes Adhes 23:377
Papon E, Olive M et al (2008) In: Proceedings of the 31st annual meeting of the adhesion society, Austin, USA, pp 296–297
Ratna D, Banthia A (2000) Epoxidized soybean oil toughened epoxy adhesive. J Adhes Sci Tech 14:15
Sauer H, Spiekermann S et al (2004) Accelerated curing with microwaves and nanoferrites. Adhesion. Adhes & Sealants 2003/2004:48–50
Sekine T, Tomita H et al (2009) An induction heating method with traveling magnetic field for long structure metal. Electr Eng Japan 168:32
Shiote H, Ohe M et al (2009) Effects of electrical treatment conditions on dismantlable properties of joints bonded with electrically disbanding adhesive. J Adhes Soc Japan 45:376 (in Japanese)
Sprenger S, Eger C et al (2004) Nano-modified ambient temperature curing epoxy adhesives. Adhesion. Adhes & Sealants 2003/2004:20–23
Umemura K, Inoue A et al (2003) Development of new natural polymer-based wood adhesives I: dry bond strength and water resistance of konjac glucomannan, chitosan, and their composites. J Wood Sci 49:221
Viljanmaa M, Sodergard A et al (2002) Lactic acid based polymers as hot melt adhesives for packaging applications. Int J Adhes Adhes 22:219
Welsh J, Higgins J et al (2003) Evaluation of electrically disbonding adhesive properties for use as separation systems. In: AIAA 2003-1436 (44th AIAA/ASME/ASCE/AHS structures, structural dynamics, and materials conference), Norfolk, USA, pp 1–3
Yamada K, Chen T et al (2000) Chitosan based water-resistant adhesive. Analogy to mussel glue. Biomacromolecules 1:252
Author information
Authors and Affiliations
Corresponding author
Editor information
Editors and Affiliations
Rights and permissions
Copyright information
© 2011 Springer-Verlag Berlin Heidelberg
About this entry
Cite this entry
Sato, C. (2011). Recycling and Environmental Aspects. In: da Silva, L.F.M., Öchsner, A., Adams, R.D. (eds) Handbook of Adhesion Technology. Springer, Berlin, Heidelberg. https://doi.org/10.1007/978-3-642-01169-6_58
Download citation
DOI: https://doi.org/10.1007/978-3-642-01169-6_58
Publisher Name: Springer, Berlin, Heidelberg
Print ISBN: 978-3-642-01168-9
Online ISBN: 978-3-642-01169-6
eBook Packages: EngineeringReference Module Computer Science and Engineering